User Guide

4.2 HDD 4 Replacement Procedures
3. Remove the HDD pack by pulling the white vinyl grip attached to the HDD pack. Use
care not to touch the connectors.
Figure 4-9 Removing the HDD pack
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it failed.
4. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4 white
flat-head screws.
5. Remove the HDD bracket.
Figure 4-10 Removing the HDD bracket
CAUTION: Do not apply pressure to the top or bottom of the drive.
Satellite M20 Maintenance Manual 4-19