User Guide

4 Replacement Procedures 4.2 HDD
Installing the HDD
Install the HDD according to the following procedures and Figures 4-8, 4-9, and 4-10.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Attach the HDD bracket and white plastic grip to the HDD pack.
2. Fix the HDD and its bracket with the two M3x4 black flat-head screws.
CAUTION: When installing the HDD pack into the computer, do not press the center of the
HDD pack to prevent the HDD bracket from being distorted. Always hold the HDD pack by
its sides.
3. Install the HDD pack into the correct position in the computer. Connect the HDD pack
to the computer, holding the HDD pack by its sides.
4. Insert the white plastic grip into the gap between the computer and HDD pack, and
install the HDD cover.
5. Fix the HDD cover with one M2.5x6 black bind screw.
4-20 Satellite M20 Maintenance Manual