User Guide

4.5 Keyboard 4 Replacement Procedures
4.5 Keyboard
Removing the Keyboard
Remove the keyboard according to the following procedures and Figures 4-16 and 4-17.
CAUTION: To avoid fingernail damage, do not pull out the keyboard holder by clamping
it with your fingernails.
1. Open the display panel.
2. Remove the keyboard lock and M2.5x2 black bind screws.
3. Move the keyboard in the direction of the arrow until the keyboard connector appears.
Figure 4-16 Removing the keyboard lock and screws
4. Disconnect the keyboard cable from CN18 on the system board and remove the
keyboard.
Satellite M20 Maintenance Manual 4-27