User Guide

4 Replacement Procedures 4.5 Keyboard
Figure 4-17 Removing the keyboard
Installing the Keyboard
Install the keyboard according to the following procedures and Figures 4-16 and 4-17.
1. Connect the keyboard cable to CN18 on the system board.
2. Align the latches on the front of the keyboard with the latch holes on the top cover.
3. Fix the keyboard with the keyboard lock and M2.5x2 black bind screws.
4. Install the keyboard holder in the correct position and fasten the five latches securely.
4-28 Satellite M20 Maintenance Manual