User Guide

4 Replacement Procedures 4.15 Cooling Module
4.15 Cooling Module
CAUTION: When removing the cooling module, keep the following in mind:
1. The cooling module can become very hot during operation. Be sure to let it cool down
before starting the repair work.
2. Do not touch or give shock to the fan in the cooling module.
Removing the Cooling Module
Remove the cooling module according to the following procedures and Figure 4-34.
1. Disconnect the cable of the cooling module from CN15 on the system board.
2. Remove the two M2.5x6 black flat-head screws and four M2x4 white bind screws.
3. Remove the cooling module.
CN15
Figure 4-34 Removing the cooling module
4-52 Satellite M20 Maintenance Manual