User Guide

4 Replacement Procedures 4.19 Samsung 14.1-inch FL
Installing the Samsung 14.1-inch FL tube
Install the Samsung 14.1-inch FL tube according to the following procedures and Figures 4-42
to 4-49.
1. Place the FL tube on the correct location in the frame.
2. Connect the ground wire to the frame.
3. Fix the back cover of the FL tube with the two screws.
4. Attach these:
 Reflective sheet
 Light guide plate
 Diffuser sheet
 Prism sheet
5. Fasten the two clips.
6. Place the panel assembly on the correct location in the backlight assembly.
7. Place the upper chassis on the frame. Fit the hooks into the holes. There are four hooks
at the bottom, four hooks on each of the left- and right-hand sides, and six hooks at the
top.
8. Fix the power supply board with the two screws.
9. Attach the PCB cover and three pieces of tape.
4-68 Satellite M20 Maintenance Manual