User Guide

4.21 Sharp 14.1-inch FL 4 Replacement Procedures
4.21 Sharp 14.1-inch FL
Replace the Sharp 14.1-inch FL tube according to the following procedures and Figures 4-62
to 4-71.
CAUTION: Wear fingerstalls during working to prevent contamination and damage of the
liquid crystal display.
1. Flip the module over and remove the protective cover S (A), protective cover G (B),
aluminum tape (C), tape for lead fixing (D), and retention tape (H).
Do not remove the shield tape (I) completely (leave the tape attached partially).
Use care not to damage the TCP and chips. Discard the removed tapes.
Figure 4-62 Removing the protectives cover and tape
Satellite M20 Maintenance Manual 4-81