User Guide

4 Replacement Procedures 4.21 Sharp 14.1-inch FL
11. Attach the protective cover S (A), protective cover G (B), aluminum tape (C), and tape
for lead fixing (D), all of which must be new ones.
Attach the protective cover (A) then cover (B), using the engaging pins as the guide.
Fold the ends of the covers toward the side of the bezel.
• When attaching the aluminum tape (C)
− Align a longer side with the marking on the lamp cover on the reverse
side of the bezel.
− Align a shorter side with the edge of the lamp cover.
• When attaching the tape for lead fixing (D)
• Align a longer side with the marking on the lamp cover on the reverse side of
the bezel.
− Align a shorter side with the location where the head of the screw is
covered.
• When attaching the retention tape (H)
− Align both a longer and a shorter sides with the rectangular hole.
Engaging pins
Rectangular hole
Figure 4-70 Attaching the protective cover and tapes
4-86 Satellite M20 Maintenance Manual