Benutzerhandbuch P50-B/P50t-B
Inhaltsverzeichnis Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit Copyright, Haftungsausschluss und Marken ..................................... 1-1 Zulassungsbestimmungen ................................................................... 1-2 Videostandardhinweis .......................................................................... 1-8 OpenSSL Toolkit - Lizenzhinweise ...................................................... 1-8 FreeType-Lizenz .......................................
Akku ...................................................................................................... 4-26 LAN ....................................................................................................... 4-30 Zusätzliche Speichermodule .............................................................. 4-32 Speichermedien ................................................................................... 4-36 Externer Monitor ......................................................................
Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit In diesem Kapitel werden rechtliche sowie zulassungs- und sicherheitsrelevante Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Copyright, Haftungsausschluss und Marken Copyright ©2014 by TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig.
Marken Intel, Intel SpeedStep, Intel Core und Centrino sind Marken oder eingetragene Marken der Intel Corporation. Windows, Microsoft und das Windows-Logo sind eingetragene Marken der Microsoft Corporation. Die Bluetooth®-Marke und -Logos sind eingetragene Marken im Besitz von Bluetooth SIG, Inc., und die Verwendung dieser Marken durch die Toshiba Corporation und deren Tochterunternehmen erfolgt unter Lizenz.
Aus- und Einschalten festgestellt werden. In diesem Fall empfiehlt es sich, einen oder mehrere der folgenden Schritte auszuführen: Richten Sie die Antenne neu aus. Vergrößern Sie den Abstand zwischen dem Gerät und dem Empfänger. Schließen Sie das Gerät und den Empfänger an unterschiedliche Stromkreise an. Wenden Sie sich an den Händler oder an einen erfahrenen Rundfunk-/Fernsehtechniker. An dieses Gerät dürfen nur Peripheriegeräte angeschlossen werden, die den FCC-Bestimmungen der Klasse B entsprechen.
Erklärung zur EU-Konformität Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit den entsprechenden europäischen Richtlinien. Verantwortlich für die CE-Kennzeichnung ist die TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Deutschland. Den vollständigen und offiziellen Text der EU-Konformitätserklärung finden Sie auf der TOSHIBA-Website http://epps.toshiba-teg.com.
Für alle eventuellen Folgen, die aufgrund der Verwendung dieses Produkts in nicht geeigneten Arbeitsumgebungen entstehen könnten, ist TOSHIBA nicht verantwortlich.
Die folgenden Informationen gelten nur für die Mitgliedstaaten der EU: Entsorgung von Produkten Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Produkte getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Eingebaute Batterien und Akkus können zusammen mit dem Produkt entsorgt werden. Sie werden in den Recyclingzentralen entnommen und gesondert entsorgt. Der schwarze Balken zeigt an, dass das Produkt nach dem 13. August 2005 auf den Markt gebracht wurde.
Diese Symbole sind bei Ihrem Modell möglicherweise nicht vorhanden; dies richtet sich nach dem Land/Gebiet, in dem Sie das Gerät gekauft haben. REACH - Konformitätserklärung Am 1. Juni 2007 trat die neue Chemikalienverordnung der Europäischen Union (EU), REACH, mit abgestuften Umsetzungsfristen bis 2018 in Kraft. REACH steht für Registration, Evaluation, Authorization and Restriction of Chemicals (Registrierung, Bewertung, Zulassung und Beschränkung von Chemikalien).
Die folgenden Informationen gelten nur für Indien: Dieses Symbol zeigt an, dass dieses Produkt nicht als normaler Hausmüll behandelt werden darf. Indem Sie dafür sorgen, dass dieses Produkt korrekt entsorgt wird, tragen Sie dazu bei, negative Folgen für die Umwelt und Gesundheitsrisiken zu vermeiden, welche durch die falsche Entsorgung des Produkts verursacht werden könnten. Weitere Informationen zum Recycling dieses Produkts finden Sie auf unserer Website ( http://www.toshiba-india.
Fragen zur Lizenz haben, wenden Sie sich bitte an opensslcore@openssl.org. OpenSSL-Lizenz -----------------------/*===================================================== Copyright (c) 1998-2011 The OpenSSL Project. Alle Rechte vorbehalten. Redistributionen und die Verwendung im Quell- und Binärformat sind mit oder ohne Modifikationen erlaubt, sofern die folgenden Bedingungen erfüllt sind: 1. 2. 3.
(EINSCHLIESSLICH, ABER NICHT BESCHRÄNKT AUF DIE BESCHAFFUNG VON ERSATZPRODUKTEN ODER DIENSTLEISTUNGEN; NUTZUNGS- ODER GEWINNAUSFALL, DATENVERLUST UND GESCHÄFTSUNTERBRECHUNG); UNABHÄNGIG DAVON, AUF WELCHE HAFTUNGSTHEORIE DIESE GESTÜTZT WERDEN, GLEICHGÜLTIG, OB VERTRAGSHAFTUNG, VERSCHULDENSUNABHÄNGIGE HAFTUNG ODER DELIKTSHAFTUNG (EINSCHLIESSLICH FAHRLÄSSIGKEIT ODER SONSTIGES), DIE IN IRGENDEINER ART UND WEISE AUS DER NUTZUNG DIESER SOFTWARE RESULTIEREN, SELBST WENN AUF DIE MÖGLICHKEIT DERARTIGER SCHÄDEN HINGE
2. 3. Redistributionen in binärer Form müssen den oben stehenden Copyrighthinweis, diese Liste der Bedingungen und den folgenden Haftungssauschluss in der Dokumentation und/oder in anderen mit der Distribution bereitgestellten Materialien enthalten. Alle Werbematerialien, in denen Funktionen oder der Einsatz dieser Software erwähnt werden, müssen folgende Erklärung beinhalten: „Dieses Produkt enthält verschlüsselte Software, die von Eric Young (eay@cryptsoft.com) geschrieben wurde.“ 4.
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm und Werner Lemberg Einführung ============ Das FreeType Project wird in verschiedenen Archivpaketen verteilt; einige davon können neben der FreeType Font Engine verschiedene Tools und Beiträge enthalten, die auf dem FreeType Project basieren oder damit zusammenhängen. Diese Lizenz gilt für alle Dateien, die in solchen Paketen enthalten sind und für die keine eigenen Lizenzen gelten.
-------------In dieser Lizenz beziehen sich die Begriffe „Paket“, „FreeType Project“ und „FreeType-Archiv“ auf die Dateien, die ursprünglich von den Autoren (David Turner, Robert Wilhelm und Werner Lemberg) als „FreeType Project“ verteilt wurden, sei es als Alpha-, Beta- oder endgültige Version.
Bei der Weiterverbreitung des Quellcodes muss das Original dieser Lizenzdatei („FTL.TXT“) unverändert beibehalten werden; jegliche Zusätze, Auslassungen oder Änderungen an den Originaldateien müssen in der begleitenden Dokumentation deutlich erwähnt werden. Die Copyright-Hinweise der unveränderten Originaldateien müssen in allen Kopien der Quelldateien erhalten bleiben.
freetype-devel@nongnu.org Hier werden Bugs sowie Engine-Interna, Designprobleme, spezifische Lizenzen, Portierung usw. diskutiert. Unsere Homepage finden Sie unter http://www.freetype.org ENERGY STAR® Programm Ihr Computermodell erfüllt möglicherweise die ENERGY STAR®-Bestimmungen. In diesem Fall ist der Computer mit dem ENERGY STAR®-Logo gekennzeichnet, und es gelten die folgenden Angaben.
Entsorgung des Computers und der Akkus Wenden Sie sich an einen autorisierten TOSHIBA-Servicepartner, falls Sie Informationen zur Entsorgung des Computers und der Akkus benötigen. Sicherheitshinweise für optische Laufwerke Beachten Sie bitte unbedingt die Hinweise am Ende dieses Abschnitts. Das Laufwerkmodell enthält ein Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf.
Vorsichtsmaßnahmen VORSICHT: Dieses Gerät arbeitet mit einem Lasersystem und ist als „PRODUKT DER LASERSCHUTZKLASSE 1“ eingestuft. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an das nächste autorisierte Service-Center, wenn Probleme mit diesem Modell auftreten. Öffnen Sie das Gehäuse nicht, um zu vermeiden, dass Sie dem Laserstrahl direkt ausgesetzt werden.
Eine Überhitzung von Computer oder Netzadapter könnte zu einem Systemausfall, zu Schäden an Computer oder Netzadapter oder zu einem Brand führen, was schwere Verletzungen zur Folge haben kann. Computerfreundliche Umgebung einrichten Stellen Sie den Computer auf einer ebenen Oberfläche ab, die ausreichend Platz für den Computer sowie das gesamte erforderliche Zubehör (z. B. Drucker) bietet. Lassen Sie genügend Platz um den Computer und die Peripheriegeräte herum, damit die Lüftung gewährleistet ist.
Auch das Gehäuse des Netzadapters wird bei längerer Verwendung warm. Dieser Zustand weist nicht auf eine Fehlfunktion hin. Ziehen Sie den Netzadapter ab und lassen Sie ihn abkühlen, bevor Sie ihn transportieren. Legen Sie den Netzadapter nicht auf hitzeempfindlichem Material ab, da dieses sonst beschädigt werden könnte. Schäden durch Druck- oder Stoßeinwirkung Setzen Sie den Computer keinem starken Druck aus und lassen Sie keine Gegenstände auf ihn fallen.
Schalten Sie den Computer aus, trennen Sie den Netzadapter und warten Sie, bis der Computer abgekühlt ist, bevor Sie ihn transportieren. Andernfalls kann es zu leichteren Verbrennungen kommen. Setzen Sie den Computer keinen Stößen aus. Andernfalls können es zu einer Beschädigung des Computers, zu Fehlfunktionen oder Datenverlusten kommen. Transportieren Sie den Computer nicht, wenn Karten installiert sind. Dies kann zu Schäden am Computer und/oder der Karte und zu einem Ausfall des Computers führen.
Bitte lesen. Ein Hinweis ist eine Anmerkung oder ein Ratschlag, der Ihnen bei der optimalen Nutzung Ihrer Geräte hilft.
Kapitel 2 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Einige der in diesem Handbuch beschriebenen Einrichtungen funktionieren eventuell nicht ordnungsgemäß, wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
Klicken Tippen Sie einmal auf das Touchpad oder klicken Sie einmal mit der linken TouchpadSteuerungstaste. Klicken Sie einmal mit der linken Maustaste. Tippen Sie einmal auf den Touchscreen (nur bei Modellen mit Touchscreen). Rechtsklick Klicken Sie einmal mit der rechten Touchpad-Steuerungstaste. Klicken Sie einmal mit der rechten Maustaste. Berühren und halten Sie den Touchscreen (nur bei Modellen mit Touchscreen).
Apps-Ansicht Sie finden alle Apps und Desktopprogramme in der Apps-Ansicht. So rufen Sie die Apps-Ansicht auf Bewegen Sie den Mauszeiger in die untere linke Ecke des Bildschirms und klicken Sie auf das Symbol . Wischen Sie von der Mitte des Startbildschirms nach oben (nur bei Touchscreenmodellen). Erstmalige Verwendung des Computers Lesen Sie auch das mitgelieferte Handbuch für sicheres und angenehmes Arbeiten, um sich über die sichere und richtige Verwendung des Computers zu informieren.
Anschließen des Netzadapters Stecken Sie den Netzadapter in den Computer, wenn der Akku aufgeladen werden muss oder Sie über eine Steckdose arbeiten möchten. Dies ist auch die schnellste Art der Inbetriebnahme, da der Akku zuerst geladen werden muss, bevor dieser das Gerät mit Akkuenergie versorgen kann.
Legen Sie den Computer oder Netzadapter nicht auf einer hölzernen Oberfläche ab (oder einer anderen Oberfläche, die durch Hitze beschädigt werden kann), während Sie ihn verwenden, da die äußere Temperatur der Unterseite des Computers und des Adapters bei normaler Verwendung zunimmt. Legen Sie Computer und Netzadapter immer auf einer flachen und harten Oberfläche ab, die nicht hitzeempfindlich ist.
Öffnen des Bildschirms Die Neigung des Bildschirms ist in einem großen Bereich einstellbar und ermöglicht so ein Optimum an Lesbarkeit und Komfort. Öffnen Sie den Bildschirm langsam. Legen Sie dabei eine Hand auf die Handballenablage, damit der Computer nicht angehoben wird. Dadurch können Sie den Winkel des Bildschirms für optimale Schärfe einstellen. Abbildung 2-4 Bildschirm öffnen 1 1. Bildschirm Seien Sie beim Öffnen und Schließen des Bildschirms vorsichtig.
Einschalten In diesem Abschnitt wird beschrieben, wie Sie den Computer einschalten die Anzeige Power gibt den Status an. Weitere Informationen finden Sie unter Beschreibung der Stromversorgungsbedingungen. Nachdem Sie den Computer zum ersten Mal eingeschaltet haben, dürfen Sie ihn erst dann wieder ausschalten, wenn das Betriebssystem vollständig eingerichtet und gestartet wurde. Die Lautstärke kann während des Windows-Setup eingestellt werden. 1. 2. Öffnen Sie den Bildschirm.
Im Startbildschirm können Sie einfach eingeben, wonach Sie suchen. Sie können unkompliziert zwischen Suchergebnissen für Apps, Dateien und mehr wechseln. Windows-Taskleiste Zeigen Sie auf den unteren Rand, um die Windows-Taskleiste auf dem Startbildschirm anzuzeigen. (Falls Sie die Windows-Taskleiste an einen anderen Rand verschoben haben, zeigen Sie dorthin.) Alle zuletzt verwendeten Anwendungen sehen Sie in der WindowsTaskleiste.
Einstellungen Mit diesem Charm haben Sie Zugriff auf die Computereinstellungen (Lautstärke, Helligkeit, Internetverbindung und mehr). Kacheln Kacheln können Sie vom Startbildschirm aus aufrufen. Häufig verwendete Startbildschirmkacheln sind „Desktop“ und „Mail“ sowie Kacheln für alle Anwendungen, die Sie auf das System heruntergeladen haben.
2. Wenn der Computer auf keines der Laufwerke mehr zugreift, nehmen Sie die Disc aus dem entsprechenden Laufwerk. Wenn Sie den Computer ausschalten, während er noch auf ein Laufwerk zugreift, riskieren Sie Datenverlust oder eine Beschädigung des Datenträgers. Schalten Sie das Gerät nie aus, während eine Anwendung ausgeführt wird. Dies könnte zu Datenverlust führen.
das Ausschalten aller drahtlosen Kommunikationsfunktionen und das Deaktivieren von Funktionen, die den Computer automatisch einschalten, zum Beispiel programmierte Aufnahmen. Wenn Sie den Computer nicht wie beschrieben vollständig ausschalten, kann sich das System selbst reaktivieren, um geplante Aufgaben auszuführen oder ungesicherte Daten zu speichern, wodurch es zu Störungen von Bordsystemen oder anderen Systemen und damit zu schweren Unfällen kommen kann.
Sie sparen Energie, indem das System heruntergefahren wird, wenn während eines bestimmten Zeitraums, dessen Länge mit der Funktion „System-Energiesparmodus“ festgelegt wird, keine Eingaben oder Hardwarezugriffe erfolgen. Sie können die LCD-gesteuerte Ausschaltung verwenden. Aktivieren des Energiesparmodus Der Energiesparmodus lässt sich folgendermaßen aufrufen: Klicken Sie auf dem Startbildschirm auf das Ein/Aus-Symbol ( ) und wählen Sie Energiesparmodus.
Speichern Sie Ihre Arbeit. Wird der Ruhezustand aktiviert, speichert der Computer den Inhalt des Arbeitsspeichers auf der Festplatte. Aus Sicherheitsgründen sollten Sie die Daten jedoch auch selbst speichern. Wenn Sie den Netzadapter trennen, bevor der Speichervorgang abgeschlossen ist, gehen Daten verloren. Bauen Sie keine Speichermodule ein oder aus, wenn sich der Computer im Ruhezustand befindet. Dabei können Daten verloren gehen.
Automatisches Aktivieren des Ruhezustands Der Computer kann so konfiguriert werden, dass er automatisch in den Ruhezustand wechselt, wenn Sie den Netzschalter betätigen oder den Bildschirm schließen. Um diese Einstellungen zu definieren, können Sie die folgenden Schritte durchführen: 1. 2. 3. Klicken Sie auf Energieoptionen und dann auf Auswählen, was beim Drücken des Netzschalters geschehen soll oder Auswählen, was beim Zuklappen des Computers geschehen soll.
Kapitel 3 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie im Abschnitt Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
Anzeige „Power“ Die Power-Anzeige leuchtet weiß, wenn der Computer eingeschaltet ist. Wenn Sie den Computer in den Energiesparmodus versetzen, blinkt diese Anzeige weiß. Anzeige „Drahtlose Kommunikation“ Die Anzeige für die Drahtlose Kommunikation leuchtet gelb, wenn die Bluetooth- oder Wireless LAN-Funktionen aktiviert sind. Einige Modelle verfügen über Bluetooth und Wireless LAN-Funktionen.
19-V-Gleichstromeingang Der Netzadapter wird an diese Buchse angeschlossen, um den Computer mit Strom zu versorgen und die internen Batterien aufzuladen. Bitte beachten Sie, dass Sie nur das mit dem Computer beim Kauf mitgeliefert Netzadaptermodell verwenden sollten - die Verwendung eines falschen Netzadapters kann zu Schäden am Computer führen. LAN-Buchse Über diese Buchse können Sie den Computer an ein LAN anschließen.
Fremdkörper können einen Kurzschluss verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte. Optisches Laufwerk Der Computer ist mit einem DVD-Super-MultiLaufwerk oder Blu-ray™ Writer-Laufwerk ausgestattet. DVD-RAM-Discs mit einer Kapazität von 2,6 und 5,2 GB können nicht gelesen und es kann nicht darauf geschrieben werden. Rechte Seite Diese Abbildung zeigt die rechte Seite des Computers. Abbildung 3-3 Rechte Seite des Computers 1 2 3 1. Kopfhörerbuchse 2.
HDMI-Ausgang An den HDMI-Ausgang können Sie ein HDMIKabel (Typ A) anschließen. Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Schlitz für ein Sicherheitsschloss Ein Sicherheitskabel kann an diesem Schlitz befestigt und dann mit einem Schreibtisch oder einem anderen großen Gegenstand verbunden werden, um einen Diebstahl des Computers zu verhindern. Rückseite Diese Abbildung zeigt die Rückseite des Computers.
verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte. Entfernen Sie die Staubansammlungen an den Lüftungsschlitzen vorsichtig mit einem weichen Tuch. Sockel für Speichermodul Der Sockel für Speichermodule ermöglicht den Einbau, Austausch und das Entfernen eines zusätzlichen Speichermoduls. Die Größe der Speichermodule ist modellabhängig. Der tatsächlich vom System verwendbare Speicher ist etwas kleiner als die Gesamtkapazität der Speichermodule.
Abbildung 3-7 Oberseite des Modells mit Touchscreen 2 1 3 4 5 1. Mikrofon 2. Webcam-LED 3. Webcam 4. Mikrofon* 5. Antennen für drahtlose Kommunikation (nicht abgebildet) 6. Bildschirm 7. Stereolautsprecher 8. LCD-Scharniere 9. Ein/Aus-Taste 10. Tastatur 11. Touchpad 12. Touchpad-Klicktasten * Bei einigen Modellen verfügbar. Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen importieren und aufnehmen.
Bildschirm 39,6 cm (15,6") LCD, konfiguriert mit einer der folgenden Auflösungen je nach Modell: FHD, 1920 horizontale x 1080 vertikale Pixel UHD, 3840 horizontale x 2160 vertikale Pixel Wenn der Computer mit dem Netzadapter betrieben wird, ist das auf dem internen Bildschirm angezeigte Bild etwas heller als bei Akkubetrieb. Der Unterschied bei der Helligkeit soll bei Akkubetrieb Energie sparen. Rechtliche Hinweise (LCD) Weitere Informationen zum LCD finden Sie im Abschnitt Rechtliche Hinweise.
Touchpad-Klicktasten Die zwei Tasten am unteren Rand des Touchpads entsprechen den beiden Tasten einer Standardmaus. Drücken Sie die linke Taste, um einen Menüeintrag auszuwählen oder um ein Text- oder Grafikobjekt zu bearbeiten, auf dem sich der Zeiger befindet. Drücken Sie auf die rechte Taste, um ein Kontextmenü oder je nach Software andere Funktionen aufzurufen. Interne Hardwarekomponenten In diesem Kapitel werden die internen Hardwarekomponenten des Computers beschrieben.
Festplattenlaufwerk Die Kapazität des Festplattenlaufwerks ist oder Solid-State-Drive modellabhängig. Um zu überprüfen, mit welchem FestplattenSSD-Typ Ihr Computer ausgestattet ist, öffnen Sie TOSHIBA PC Health Monitor, indem Sie auf Desktop Assist -> Support & Wiederherstellung -> PC Health Monitor und dann auf PC-Info klicken. Bitte beachten Sie, dass ein Teil der FestplattenGesamtkapazität für Verwaltungszwecke reserviert ist.
Weitere Informationen zum Arbeitsspeicher finden Sie im Abschnitt Rechtliche Hinweise. Grafikchip Die Leistung des Grafikchips (GPU) variiert je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen. Die GPU-Leistung ist nur im Netzbetrieb optimal und kann im Akkubetrieb erheblich absinken. Rechtliche Hinweise (Grafikchip, „GPU“) Weitere Informationen zur Grafikprozessoreinheit (GPU) finden Sie im Abschnitt Rechtliche Hinweise.
3. 4. Entfernen Sie die Markierung vom Kontrollkästchen Display Power Saving Technology. Klicken Sie auf OK. Wenn Sie diese Funktion aktivieren möchten, gehen Sie wie oben beschrieben vor und aktivieren Sie dann das Kontrollkästchen Display Power Saving Technology. Beschreibung der Stromversorgungsbedingungen Stromversorgungsbedingungen Die Einsatzfähigkeit des Computers und der Status des Akkus richten sich nach den Stromversorgungsbedingungen, d. h.
Anzeige „DC IN/Akku“ Prüfen Sie die Anzeige DC IN/Akku, um den Ladezustand des Akkus und den Status der Stromversorgung durch den angeschlossenen Netzadapter zu überprüfen. Die Anzeige zeigt die folgenden Zustände an: Gelb blinkend Die Akkuladung ist gering. Der Netzadapter muss angeschlossen werden, um den Akku wieder aufzuladen. Gelb Der Netzadapter ist angeschlossen und der Akku wird aufgeladen. Weiß Der Netzadapter ist angeschlossen und der Akku ist vollständig aufgeladen.
Kapitel 4 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchscreens Einige Modelle sind mit einem Touchscreen ausgestattet. Sie können Symbole, Schaltflächen, Menüpunkte, die Bildschirmtastatur und andere Elemente auf dem Touchscreen mit dem Finger bedienen.
Zum Auswählen wischen Gleiten Sie mit Ihrem Finger auf einem Element, zum Beispiel einer App, herunter, um sie auszuwählen. Dadurch werden normalerweise die App-Befehle geöffnet. Wischen Bewegen Sie Ihren Finger ohne Pause nach dem ersten Aufsetzen schnell vom Bildschirmrand nach innen. Wischen vom linken Rand: zeigt die zuletzt geöffneten Apps an. Wischen vom rechten Rand: öffnet oder schließt die Charms (Suchen, Teilen, Start, Geräte, Einstellungen).
Wischen Bewegen Sie Ihren Finger ohne Pause nach dem ersten Aufsetzen schnell vom Touchpadrand nach innen. Wischen vom linken Rand: zeigt die zuletzt geöffneten Apps an. Wischen vom rechten Rand: öffnet oder schließt die Charms (Suchen, Teilen, Start, Geräte, Einstellungen). Wischen vom oberen Rand: öffnet oder schließt die App-Befehlszeile. Einige der in diesem Abschnitt beschriebenen Touchpadvorgänge werden nur von bestimmten Anwendungen unterstützt.
Abbildung 4-1 Tastaturanzeigen 2 1 1. CAPS LOCK 2. Numerischer Modus CAPS LOCK Diese Anzeige leuchtet grün, wenn die Feststelltaste für die Großbuchstaben betätigt wurde. NUMERISCHER MODUS Wenn die Anzeige „Numerischer Modus“ leuchtet, können Sie mit den Zifferntasten der Tastatur Ziffern eingeben. Funktionstasten Die Funktionstasten (F1~F12) sind die zwölf Tasten oben auf der Tastatur.
Sonderfunktionsmodus F1-F12Standardmodus Funktion F4 FN + F4 Ändert das aktive Anzeigegerät. Für die gleichzeitige Anzeige müssen Sie die Auflösung des eingebauten Bildschirms so einstellen, dass sie der Auflösung des externen Anzeigegeräts entspricht. F5 FN + F5 Aktiviert oder deaktiviert das Touchpad. F6 FN + F6 Führt einen Rücklauf durch die Medien aus. F7 FN + F7 Spielt Medien ab oder unterbricht die Wiedergabe.
Diese Popupbenachrichtigungen sind standardmäßig deaktiviert. Sie können sie in der Anwendung TOSHIBA Funktionstaste aktivieren. Dieses Utility rufen Sie auf, indem Sie auf dem Desktop Folgendes wählen: Desktop Assist -> Tools & Utilitys -> Funktionstaste. Windows-Tasten Die Tastatur verfügt über zwei Tasten, die unter Windows besondere Funktionen haben: die Windows-Logo-Taste ruft den Startbildschirm auf, die Anwendungstaste hat die gleiche Funktion wie die sekundäre (rechte) Maustaste.
Blu-ray™-Brenner Zusätzlich zu den oben aufgeführten Formaten unterstützt der Blu-ray™Brenner auch BD-ROM, BD-ROM DL, BD-R, BD-R DL, BD-RE und BD-RE DL. Blu-ray™-Brenner BDXL™ Zusätzlich zu den oben aufgeführten Formaten unterstützt der Blu-ray™Brenner BDXL™ auch BD-R TL, BD-R QL und BD-RE TL. Einige Arten und Formate von DVD-R DL- und DVD+R DL-Discs können möglicherweise nicht gelesen werden. Verwenden der optischen Laufwerke Mit dem Laufwerk können Sie disc-gestützte Programme ausführen.
3. Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerklade. Abbildung 4-3 Disc einlegen 1 1. Laserlinse Wenn die Laufwerklade vollständig geöffnet ist, ragt das Gehäuse des Computers etwas über die Lade hinaus. Deshalb müssen Sie die Disc beim Einlegen leicht geneigt halten. Nach dem Einpassen muss die Disc jedoch flach in der Lade liegen. Berühren Sie nicht die Laserlinse und den umgebenden Bereich; sie könnte dadurch falsch ausgerichtet werden.
optische Laufwerk nicht mehr leuchtet, bevor Sie die Lade öffnen. Warten Sie außerdem, bis sich die Disc nicht mehr dreht, bevor Sie sie herausnehmen. 1. Drücken Sie auf die Entnahmetaste, um die Lade etwas zu öffnen. Ziehen Sie die Lade dann vorsichtig heraus, bis sie vollständig geöffnet ist. Wenn sich die Lade etwas öffnet, warten Sie einen Augenblick, um sicherzugehen, dass sich die Disc nicht mehr dreht, bevor Sie die Lade vollständig öffnen. 2. 3.
CDs CD–Rs lassen sich nur einmal beschreiben. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. CD-RWs, darunter Multispeed-CD-RWs, Highspeed-CD-RWs und Ultraspeed-CD-RWs, können mehrmals beschrieben werden. DVDs DVD-R, DVD+R, DVD-R DL und DVD+R DL-Discs können nur einmal beschrieben werden. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. DVD-RW-, DVD+RW- und DVD-RAM-Discs lassen sich mehrmals beschreiben.
Informationen nicht erfolgreich schreiben können - dies kann entweder zu Datenverlust führen oder andere Schäden am Laufwerk oder den Medien verursachen. Haftungsausschluss TOSHIBA ist für die folgenden Schäden nicht haftbar: Schäden an der , die beim Beschreiben bzw. Wiederbeschreiben mit diesem Produkt auftreten. Jegliche Veränderungen bzw. Verluste des aufgezeichneten Inhalts der , die beim Beschreiben bzw.
DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 4- und 8-facher Geschwindigkeit) DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8- und 16facher Geschwindigkeit) TAIYO YUDEN Co., Ltd. (für 8-fach- und 16-fach-Medien) DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8-facher Geschwindigkeit) DVD-RW: DVD-Spezifikationen für wiederbeschreibbare Datenträger für Version 1.1 oder 1.2 Victor Company of Japan, Ltd.
Einige Arten und Formate von DVD-R DL- und DVD+R DL-Discs können möglicherweise nicht gelesen werden. Discs, die als DVD-R DL format4 (Layer Jump Recording) erstellt wurden, können nicht gelesen werden. Während des Beschreibens oder Wiederbeschreibens von Discs Beachten Sie während des Schreibens oder Wiederbeschreibens von Discs die folgenden Punkte: Kopieren Sie die Daten von der Festplatte auf das optische Medium.
CyberLink PowerDVD for TOSHIBA Beachten Sie bei der Verwendung von CyberLink PowerDVD for TOSHIBA Folgendes: Hinweise zur Verwendung Diese Software kann nur mit Windows-Betriebssystemen verwendet werden. CyberLink PowerDVD for TOSHIBA ist nur bei Modellen mit einem DVD-Super-Multi-Laufwerk und FHD LCD (1920 x 1080 Pixel). Die Software CyberLink PowerDVD for TOSHIBA unterstützt das Abspielen von DVDs und Videodateien.
Sperren Sie den Computer nicht mithilfe der Tastenkombinationen ) + L, wenn CyberLink PowerDVD for TOSHIBA Windows-Logo ( ausgeführt wird. CyberLink PowerDVD for TOSHIBA unterstützt keine Kinderschutzfunktion. Führen Sie die Installation/Deinstallation von CyberLink PowerDVD for TOSHIBA unter einem Benutzerkonto mit Administratorrechten aus. Wechseln Sie nicht das Windows-Benutzerkonto, während CyberLink PowerDVD for TOSHIBA ausgeführt wird.
Verwenden von CyberLink PowerDVD for TOSHIBA Hinweise zur Verwendung von CyberLink PowerDVD for TOSHIBA Bildschirmanzeigen und verfügbare Funktionen können je nach Video und Szene variieren. Öffnen des Handbuchs zu CyberLink PowerDVD for TOSHIBA Die Funktionen von CyberLink PowerDVD for TOSHIBA sowie Anleitungen sind in der CyberLink PowerDVD for TOSHIBA Hilfe beschrieben. Gehen Sie folgendermaßen vor, um die Hilfe zu CyberLink PowerDVD for TOSHIBA zu öffnen.
Die Wiederaufnahmefunktion kann mit einigen Discs unter TOSHIBA VIDEO PLAYER nicht verwendet werden. Bei der Videowiedergabe sollte der Netzadapter angeschlossen werden. Energiesparfunktionen können die reibungslose Wiedergabe beeinträchtigen. Wenn Sie Video im Akkubetrieb wiedergeben, legen Sie die Energieoptionen auf „Balance“ (Ausgewogen) fest. Der Bildschirmschoner ist während der Videowiedergabe mit TOSHIBA VIDEO PLAYER deaktiviert.
Anzeigegeräte und Ton Wenn das Videobild nicht auf dem externen Monitor oder Fernsehgerät angezeigt wird, beenden Sie TOSHIBA VIDEO PLAYER und ändern Sie die Bildschirmauflösung. Um die Bildschirmauflösung zu ändern, klicken Sie auf dem Desktop auf Desktop Assist -> Systemsteuerung -> Darstellung und Personalisierung -> Anzeige -> Auflösung anpassen. Aufgrund der Ausgabe- oder Wiedergabebedingungen können Videos jedoch auf einigen externen Monitoren oder Fernsehgeräten nicht ausgegeben werden.
Drücken Sie die nach dem Starten von TOSHIBA VIDEO PLAYER die Taste F1 und klicken Sie auf Hilfe. TOSHIBA Blu-ray Disc Player Achten Sie auf die folgenden Einschränkungen bei der Verwendung von TOSHIBA Blu-ray Disc Player. Hinweise zur Verwendung Diese Software kann nur mit Windows-Betriebssystemen verwendet werden. TOSHIBA Blu-ray Disc Player steht nur bei Modellen mit einem Bluray™-Brenner zur Verfügung.
Bei einigen Discs kann mit dem TOSHIBA Blu-ray Disc Player die Wiederaufnahme der Wiedergabe nicht verwendet werden. Die interaktive Funktion von Blu-ray™ Discs funktioniert je nach Inhalt oder Netzwerksituation möglicherweise nicht. Blu-ray™-Laufwerke und die damit verbundenen Speichermedien werden entsprechend den Spezifikationen für drei Vertriebsregionen hergestellt. Regionalcodes können in TOSHIBA Blu-ray Disc Player festgelegt werden.
Ändern Sie die Bildschirmauflösung nicht, während TOSHIBA Blu-ray Disc Player ausgeführt wird. Ändern Sie das Anzeigegerät nicht, während TOSHIBA Blu-ray Disc Player ausgeführt wird. Starten von TOSHIBA Blu-ray Disc Player Gehen Sie wie nachstehend beschrieben vor, um TOSHIBA Blu-ray Disc Player zu starten. Legen Sie eine Blu-ray™ Movie Disc in das optische Laufwerk ein, während das Betriebssystem ausgeführt wird.
Ändern Sie die Bildschirmauflösung auf einen der oben genannten Werte, bevor Sie die 3D-Wiedergabefunktion verwenden. Wichtige Sicherheitshinweise zur 3D-Funktion Unterlassen oder beenden Sie das Ansehen von 3D-Filmen, wenn Sie sich dabei unwohl fühlen. Sehen Sie sich bitte keine 3D-Filme an, wenn Sie an Krämpfen, lichtempfindlichen Reaktionen oder Herzkrankheiten leiden. Aufgrund von möglichen Beeinträchtigungen der Entwicklung des Sehvermögens sollten Kinder unter sechs Jahren keine 3D-Filme ansehen.
Der TOSHIBA VIDEO PLAYER ist standardmäßig auf das 2D-Format eingestellt. Wenn Sie die Schaltfläche für die 2D-zu-3DKonvertierungsfunktion betätigen, aktivieren Sie die 2D-zu-3DKonvertierungsfunktion und betrachten Ihre 2D-Inhalte in 3D. Der TOSHIBA VIDEO PLAYER führt die 2D-zu-3D-Konvertierungsfunktion nicht automatisch aus.
Bitte überlegen Sie, ob es generell angemessen ist oder eventuell erforderlich ist, die Betrachtungszeit einzuschränken, bevor Sie Kinder 3D-Inhalte ansehen lassen. Je nach den Beleuchtungsverhältnissen im Raum können Sie unter Umständen ein Flimmern bemerken, wenn Sie die 3D-Brille tragen. Die Konvertierung und 3D-Funktionen können nicht gleichzeitig verwendet werden. Wenn Sie während der Konvertierung zur 3DWiedergabe wechseln, wird die Konvertierungsfunktion automatisch abgebrochen.
Der Player ist für die Wiedergabe von DVD-Video, DVD-VR und Videodateien sowie für die Anzeige von 2D-Homevideos und anderen 2D-Inhalten, die Sie erstellt haben, in 3D vorgesehen. Die 3DWiedergabe von Videoinhalten, die nicht vom Benutzer erstellt wurden, kann die direkte oder indirekte Zustimmung von Dritten erfordern, wenn die Inhalte urheberrechtlich geschützt sind, sofern dies nicht durch geltende Gesetze anders geregelt ist. Der Schutz geistigen Eigentums ist TOSHIBA sehr wichtig.
Der 3D-Effekt ist auch vom Betrachter abhängig; er unterscheidet sich von Person zu Person. Unterlassen oder beenden Sie die Wiedergabe und überprüfen Sie die Einstellungen Ihrer Geräte, wenn Sie doppelte Videobilder sehen oder den stereoskopischen 3D-Effekt beim Betrachten von 3D-Bildern nicht wahrnehmen können. Sollten Sie dann immer noch kein korrektes Bild sehen, verzichten Sie bitte auf die 3D-Wiedergabe. Unterlassen oder beenden Sie das Ansehen von 3D-Filmen, wenn Sie sich dabei unwohl fühlen.
RTC-Akku vollständig entladen, gehen diese Systemdaten verloren und die Echtzeituhr und der Kalender arbeiten nicht mehr. Sie können die RTC-Einstellungen im BIOS-Setup ändern. Nähere Informationen finden Sie unter Fehlerbehebung. Pflege und Gebrauch des Akkus In diesem Abschnitt finden Sie Informationen zu wichtigen Sicherheitsmaßnahmen beim Umgang mit dem Akku. Ausführliche Informationen zum Umgang mit Akkus finden Sie im mitgelieferten Handbuch für sicheres und angenehmes Arbeiten.
Die Ladezeit bei eingeschaltetem Computer ist von der Umgebungstemperatur, der Computertemperatur und vom Einsatz des Computers abhängig. Wenn Sie z. B. externe Geräte stark nutzen, wird der Akku während des Betriebs möglicherweise kaum aufgeladen. Hinweise zum Aufladen des Akkus Unter folgenden Bedingungen kann sich das Laden des Akkus verzögern: Der Akku ist extrem heiß oder kalt (wenn der Akku zu heiß ist, wird er möglicherweise gar nicht aufgeladen).
Die tatsächliche verbleibende Betriebszeit kann leicht von der berechneten Zeit abweichen. Nach häufigen Ent- und Aufladungen nimmt die Kapazität eines Akkus allmählich ab. Deshalb hat ein alter, häufig benutzter Akku eine kürzere Betriebszeit als ein neuer Akku, auch wenn beide vollständig aufgeladen sind. Maximieren der Akkubetriebszeit Die Leistungsfähigkeit eines Akkus zeigt sich daran, wie lange er nach einem Ladevorgang Energie zur Verfügung stellen kann.
Trennen Sie den Computer mindestens einmal im Monat von der Steckdose und lassen Sie ihn im Akkubetrieb laufen, bis der Akku vollständig entladen ist. Führen Sie zuvor die folgenden Schritte aus: 1. Schalten Sie den Computer aus. 2. Ziehen Sie den Netzadapter ab und schalten Sie den Computer ein. Lässt sich das Gerät nicht einschalten, fahren Sie mit Schritt 4 fort. 3. Verwenden Sie den Computer fünf Minuten lang im Akkubetrieb.
LAN-Kabeltypen Vor dem Anschluss an ein LAN muss der Computer entsprechend konfiguriert werden. Wenn Sie sich mit den Standardeinstellungen des Computers an ein LAN anmelden, kann es bei LAN-Vorgängen zu Fehlern kommen. Fragen Sie Ihren LAN-Administrator nach den korrekten Einstellungen und Verfahren. Wenn Sie ein Gigabit Ethernet-LAN (1000 Mbit/s, 1000BASE-T) benutzen, müssen Sie Kabel der Kategorie CAT5E oder höher verwenden. Kabel der Kategorie CAT3 oder CAT5 können nicht verwendet werden.
2. Stecken Sie ein Ende des Kabels in die LAN-Buchse des Computers. Drücken Sie den Stecker vorsichtig fest, bis die Lasche hörbar einrastet. Abbildung 4-5 Anschließen des LAN-Kabels 2 1 1. LAN-Buchse 3. 2. LAN-Kabel Stecken Sie das andere Ende des Kabels in den LAN-Hub-Anschluss oder Router. Sprechen Sie mit Ihrem LAN-Administrator und Ihrem Hardware- oder Software-Händler, bevor Sie eine Netzwerkverbindung konfigurieren.
Zusätzliche Speichermodule sind elektronische Präzisionsbauteile, die durch statische Elektrizität unbrauchbar werden können. Leiten Sie ggf. vorhandene statische Elektrizität von Ihrem Körper ab, bevor Sie ein zusätzliches Speichermodul anfassen. Dazu genügt es, wenn Sie einen beliebigen metallenen Gegenstand in Ihrer Nähe mit bloßen Händen berühren. Verwenden Sie einen passenden Kreuzschlitzschraubendreher, um die Schrauben herauszudrehen und festzuziehen.
7. Richten Sie die Kerbe am Speichermodul mit der am Sockel aus und setzen Sie das Modul vorsichtig in einem 30-Grad-Winkel in den Sockel, bevor Sie es nach unten drücken, bis die seitlichen Laschen einrasten. Abbildung 4-7 Speichermodul einsetzen 1 2 3 1. Nut 2. Sockel B 3. Sockel A Achten Sie darauf, dass keine Gegenstände aus Metall, wie z. B. Heftoder Büroklammern, in das Innere des Computers gelangen.
8. Setzen Sie die Speichermodul-Abdeckung ein und sichern Sie sie mit der Schraube. Achten Sie darauf, dass die Speichermodul-Abdeckung fest geschlossen ist. Abbildung 4-8 Speichermodulabdeckung einsetzen 1 2 1. Speichermodulabdeckung 2. Schraube 9. Drehen Sie den Computer um. 10. Schließen Sie den Netzadapter an und schalten Sie den Computer ein. Überprüfen Sie, ob der zusätzliche Speicher erkannt wird.
8. Fassen Sie das Modul an den Kanten und nehmen Sie es aus dem Computer. Nach längerer Verwendung des Computers werden die Speichermodule und die Schaltkreise neben den Speichermodulen sehr warm. Lassen Sie die Speichermodule auf Zimmertemperatur abkühlen, bevor Sie sie ersetzen. Andernfalls können Sie sich leichte Verbrennungen zuziehen. Berühren Sie die Anschlüsse des Speichermoduls oder des Computers nicht. Kleine Partikel auf den Anschlüssen können den Zugriff auf das Speichermodul beeinträchtigen.
Achten Sie darauf, dass keine Fremdkörper in den Speichermediensteckplatz gelangen. Achten Sie darauf, dass keine Gegenstände aus Metall, wie z.B. Heft- oder Büroklammern, in das Innere des Computers oder der Tastatur gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der Computer beschädigt und ein Feuer ausbrechen könnte. Beachten Sie, dass für die Verwendung von miniSD/microSD-Karten ein Adapter erforderlich ist. Bitte beachten Sie, dass nicht alle Speichermedien getestet wurden.
Das Logo von SDXC-Speicherkarten: . SD-Speicherkarten haben eine maximale Kapazität von 2 GB. SDHCSpeicherkarten haben eine maximale Kapazität von 32 GB. SDXCSpeicherkarten haben eine maximale Kapazität von 128 GB. Formatierung von Speichermedien Neue Speicherkarten sind entsprechend bestimmten Standards formatiert. Wenn Sie eine Speicherkarte neu formatieren möchten, verwenden Sie ein Gerät, dass diese Speicherkarte unterstützt.
Entfernen Sie keine Karte während eines Lese-/Schreibvorgangs. Weitere Informationen zur Verwendung von Speicherkarten finden Sie in der Dokumentation, die Sie mit der Karte erhalten haben. Hinweise zur Schreibschutzfunktion Speichermedienkarten verfügen über eine Schreibschutzfunktion. SD-Karte (SD-Speicherkarte, SDHC-Speicherkarte und SDXCSpeicherkarte) Bringen Sie den Schreibschutzschalter in die gesicherte Position, wenn Sie die Aufzeichnung von Daten verhindern möchten.
Schalten Sie den Computer nicht aus und wechseln Sie nicht in den Energiesparmodus oder Ruhezustand, während Dateien kopiert werden, andernfalls können Daten verloren gehen. Entfernen von Speichermedien Die nachstehenden Anleitungen gelten für alle unterstützten Speichergeräte. So entfernen Sie Speichermedien: 1. 2. 3. 4. Klicken Sie in der Windows-Taskleiste auf das Symbol Hardware sicher entfernen und Medium auswerfen Wählen Sie Speichermedium. Drücken Sie das Speichermedium, bis Sie ein Klicken hören.
lassen sich HDMI-kompatible Anzeigegeräte, zum Beispiel Fernseher, anschließen. Einige Modell unterstützen die Ultra-Highdefinition-Anzeige (3840 x 2160 Pixel) auf kompatiblen externen Geräten über den HDMI-Ausgang. Um diese Funktion zu verwenden, benötigen Sie ein HDMI-Kabel (geeignet für 3840x2160 Pixel oder mehr). Gehen Sie wie nachstehend beschrieben vor, um ein HDMI-kompatibles Anzeigegerät anzuschließen: Für den Anschluss eines Geräts an den HDMI-Ausgang benötigen Sie ein geeignetes HDMI-Kabel. 1. 2.
2. Wählen Sie in der Registerkarte Wiedergabe das Wiedergabegerät aus, das Sie verwenden möchten. 3. Um die internen Lautsprecher des Computers zu verwenden, wählen Sie Lautsprecher. Um das Fernseher oder den externen Monitor zu verwenden, den Sie an den Computer angeschlossen haben, wählen Sie ein anderes Wiedergabegerät. 4. Klicken Sie auf die Schaltfläche Als Standard. 5. Klicken Sie auf OK, um das Dialogfeld Sound zu schließen.
Ein externes Anzeigegerät mit HDMI-Anschluss und ein Wireless Display-Adapter. Der Wireless Display-Adapter wird über den HDMI-Anschluss an das externe Gerät angeschlossen und kann WLAN-Signale vom Computer empfangen. Gehen Sie wie nachstehend beschrieben vor, um eine drahtlose Verbindung zum einem externen Anzeigegerät herzustellen: 1. 2. 3. Klicken Sie im Charm Einstellungen auf PC-Einstellungen ändern > PC und Geräte -> Geräte. Klicken Sie auf Gerät hinzufügen.
2. Richten Sie das Sicherheitsseil an dem dafür vorgesehenen Schlitz aus und befestigen Sie es. Abbildung 4-13 Sicherheitsschloss 2 1 1. Schlitz für ein Sicherheitsschloss 2. Sicherheitsschloss Optionales TOSHIBA-Zubehör Sie können den Computer noch leistungsfähiger und komfortabler in der Bedienung machen, wenn Sie ihn mit optional erhältlichen Optionen und Zubehör ausstatten.
Mikrofonpegel Gehen Sie wie nachstehend beschrieben vor, um die Aufnahmelautstärke für das Mikrofon einzustellen. 1. 2. 3. Klicken Sie mit der rechten Maustaste auf das Lautsprechersymbol in der Windows-Taskleiste und wählen Sie Aufnahmegeräte. Wählen Sie Mikrofon und klicken Sie auf Eigenschaften. Verschieben Sie auf der Registerkarte Pegel den Schieberegler Mikrofon, um die Aufnahmelautstärke zu erhöhen oder zu verringern. Stellen Sie ggf. den Schieberegler Mikrofonverstärkung auf einen höheren Wert.
In diesem Fall ändern Sie die Auflösung des Bildschirms. Verringern Sie sie, bis die Anzeige korrekt erfolgt.
Kapitel 5 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zum Betrieb der einzelnen Programme finden Sie in den jeweiligen Onlinehandbüchern, Hilfedateien oder README.TXT-Dateien (falls zutreffend).
TOSHIBA Display Utility TOSHIBA Display Utility beinhaltet die Utilitys Desktoptextgröße, Bildschirmteiler, Einstellungen für Resolution+ und die Aufgabenumschaltfunktion. Mit dem Utility Desktoptextgröße können Sie die Textgröße auf dem Desktop größer oder kleiner einstellen, ganz nach Ihren Vorlieben und der Verwendung. Sie können die Textgröße auf dem Bildschirm und in der Titelleiste von Fenstern ändern, indem Sie die Skalierung einstellen.
TOSHIBA System Settings Mit diesem Utility passen Sie die Hardwareeinstellungen an Ihre Arbeitsweise und an die verwendeten Peripheriegeräte an. Um dieses Utility aufzurufen, klicken Sie auf dem Desktop auf Desktop Assist -> Tools & Utilitys -> System Settings.
TOSHIBA eco Utility Dieser Computer ist mit dem „ecoModus“ ausgestattet. In diesem Modus wird die Leistung einiger Geräte leicht verringert, um den Stromverbrauch zu senken. Bei durchgehender Verwendung können Sie eine messbare Energieersparnis erzielen. TOSHIBA eco Utility hilft Ihnen bei der Kontrolle des Stromverbrauchs Ihres Computers. Verschiedene Informationen zeigen Ihnen, wie groß Ihr Beitrag zum Umweltschutz ist.
CyberLink MediaShow 6 for TOSHIBA Diese Software hilft Ihnen, Ihre digitalen Fotos und Videos zu verwalten und zu teilen. Außerdem können Sie damit schnell professionell aussehende Medien wie benutzerdefinierte Diashows, Bildschirmschoner, Movie-Discs und mehr aus Ihren Fotos und Videos erstellen. Um dieses Utility aufzurufen, klicken Sie in der Ansicht „Alle Apps“ auf CyberLink MediaShow 6 for TOSHIBA.
TOSHIBA Service Station Diese Anwendung ermöglicht, dass der Computer automatisch nach Updates für TOSHIBA-Software oder nach anderen wichtigen Informationen von TOSHIBA, die Ihr Computersystem und dessen Programme betreffen, sucht. Wenn diese Anwendung aktiviert ist, überträgt sie eine begrenzte Menge von Systeminformationen an unsere Server. Diese Informationen werden unter strikter Einhaltung der Regeln und Vorschriften sowie geltender Datenschutzbestimmungen behandelt.
Chroma Tune for TOSHIBA Chroma Tune for TOSHIBA ist ein Utility, das die Einstellung der Farben auf dem Computer ermöglicht. Um das Utility aufzurufen, klicken Sie in der Apps-Ansicht auf Chroma Tune for TOSHIBA. Weitere Informationen zu Chroma Tune for TOSHIBA finden Sie im Benutzerhandbuch dieses Utilitys. Je nach Modell verfügen Sie möglicherweise nicht über sämtliche oben aufgeführte Software.
Intelligente Stromversorgung *1 Ein Mikroprozessor in der intelligenten Stromversorgung des Computers prüft den Ladezustand des Akkus, ermittelt automatisch die verbleibende Akkukapazität und schützt die elektronischen Bauteile des Computers auch vor unzulässigen Betriebsbedingungen wie zum Beispiel einer Überspannung aus dem Netzadapter. Diese können Sie in den Energieoptionen festlegen. Energiesparmodus *1 Mit dieser Funktion können Sie den Computer so konfigurieren, dass Akkuenergie gespart wird.
USB-Reaktivierungsfunktion Mit dieser Funktion kann der Computer abhängig von den an die USB-Anschlüsse angeschlossenen externen Geräten aus dem Energiesparmodus reaktiviert werden. Wenn zum Beispiel eine Maus oder eine USBTastatur an einen USB-Anschluss angeschlossen ist, wird der Computer durch Drücken einer Maustaste oder einer Taste auf der Tastatur reaktiviert.
Einrichten (Schaltfläche) Klicken Sie auf diese Schaltfläche, um ein Kennwort zu registrieren. Nach der Einstellung eines Kennworts werden Sie bei jedem Start des Computers zur Eingabe dieses Kennworts aufgefordert. Nachdem Sie das Kennwort eingerichtet haben, wird ein Dialogfeld eingeblendet, in dem Sie die Möglichkeit haben, es auf einem anderen Speichermedium zu speichern. Wenn Sie das Kennwort einmal vergessen sollten, können Sie die Kennwortdatei auf einem anderen Computer öffnen.
Um das BIOS-Setup zu beenden, drücken Sie die Taste F10 und wählen Sie dann Ja, um die Änderungen zu bestätigen. Der Computer wird neu gestartet. Wenn Sie Ihr HDD-Kennwort vergessen, kann Ihnen TOSHIBA nicht helfen; in diesem Fall bleibt Ihr Festplattenlaufwerk VOLLSTÄNDIG und DAUERHAFT UNBRAUCHBAR.
Zu diesem Zeitpunkt funktionieren die Funktionstasten nicht. Sie können erst nach der Eingabe des Kennworts verwendet werden. 2. 3. Geben Sie das Kennwort ein. Drücken Sie ENTER. Wenn Sie das Kennwort dreimal hintereinander falsch eingeben oder das Kennwort nicht innerhalb von 1 Minute eingeben, wird der Computer ausgeschaltet. In diesem Fall funktionieren einige Funktionen, die den Computer automatisch einschalten (Wakeup-on-LAN, Taskplaner usw.), möglicherweise nicht.
Startoptionen – Hier können Sie die Reihenfolge der Laufwerke ändern, auf denen der Computer nacheinander das Betriebssystem sucht Tastatur – Hier haben Sie Zugriff auf die Reaktivierungsfunktion der Tastatur und die Konfiguration der Funktionstasten USB – Hier können Sie USB-Einstellungen vornehmen SATA – Hier können Sie SATA-Einstellungen vornehmen LAN – Hier können Sie LAN-Einstellungen vornehmen Die hier beschriebenen Einstellungen oder Optionen können je nach Modell leicht abweichen.
Wenn die USB-Schlaf- und Ladefunktion aktiviert ist, wird der kompatible Anschluss auch bei ausgeschaltetem Computer mit Bus Power (DC 5 V) versorgt. USB Bus Power (DC 5 V) wird an alle externen Geräte geliefert, die an die kompatiblen Anschlüsse angeschlossen sind. Einige externe Geräte können jedoch nicht allein durch USB Bus Power (DC 5 V) aufgeladen werden. Wenden Sie sich an den Hersteller des Geräts oder überprüfen Sie die technischen Daten des externen Geräts, bevor Sie versuchen, es aufzuladen.
Diese Funktion kann möglicherweise mit einigen angeschlossenen Geräten nicht verwendet werden, auch wenn der passende Modus ausgewählt wurde. In diesem Fall sollten Sie diese Funktion deaktivieren und nicht verwenden. Einige externe Geräte können den Auto-Modus nicht verwenden. Wenden Sie sich an den Hersteller des Geräts oder überprüfen Sie die technischen Daten des externen Geräts, bevor Sie versuchen, es aufzuladen. Verwenden Sie immer das USB-Kabel aus dem Lieferumfang des USBGeräts.
Der „CDP-Lademodus bei System EIN“ kann mit bestimmten externen Geräten möglicherweise nicht verwendet werden, obwohl diese der USBSpezifikation entsprechen. Verwenden Sie in diesem Fall einen USBAnschluss ohne „Schlaf- und Ladefunktion“ oder deaktivieren Sie den „CDP-Lademodus bei System EIN“. Es wird empfohlen, den Netzadapter angeschlossen zu lassen, während USB-Strom (DC 5 V, 1,5 A) bereitgestellt wird.
Verbinden Sie den Computer und das Audiogerät mit einem Audiokabel, um die Schlaf- und Musikfunktion zu verwenden. Bei Verwendung der Schlaf- und Musikfunktion kann die Lautstärke nicht über den Computer geändert werden. Die Lautstärke- und Ton-aus-Einstellung kann sich im WindowsModus und im Schlaf- und Musikmodus unterscheiden. Regeln Sie deshalb vor dem Anschluss des Audiogeräts an den Computer die Lautstärke des Audiogeräts herunter. Auch die Tonqualität kann unterschiedlich sein.
Es wird empfohlen, den Netzadapter anzuschließen, wenn TOSHIBA Media Player ausgeführt wird. Energiesparfunktionen können die reibungslose Wiedergabe beeinträchtigen. Wenn TOSHIBA Media Player im Akkubetrieb verwendet wird, legen Sie die Energieoptionen auf „Balance“ (Ausgewogen) fest. Der Bildschirmschoner ist deaktiviert, wenn TOSHIBA Media Player eine Videodatei oder eine Diashow mit Fotos abspielt.
Es können nur Fotos mit einer Auflösung von höchstens 2048x 2048 Pixel an OneDrive hochgeladen werden. Fotos mit einer höheren Auflösung werden proportional skaliert, bis sie nur noch 2048x2048 Pixel groß sind. Diese App unterstützt DMS nicht. Die Wiedergabe bestimmter Mediendateien ist mit diesem Player unter Umständen nicht korrekt. Dies kann auch mit Windows Media Player und Video-Apps passieren. Die Benutzeroberfläche und die Bedienverfahren können je nach Anwendungsversion abweichen.
9. Richten Sie erweiterten Video- und Audioeigenschaften ein, indem Sie oben auf Fortgeschritten klicken. 10. Erstellen Sie die Film-Disc, indem Sie auf Brennen klicken. Weitere Informationen Weitere Informationen zu CyberLink MediaShow finden Sie in der Hilfe und im Handbuch, indem Sie nach dem Starten der Anwendung F1 drücken. Wichtige Informationen Beachten Sie die folgenden Einschränkungen beim Erstellen von MovieDiscs und beim Konvertieren/Abspielen von Mediendateien.
Die folgenden Disctypen werden für Aufnahmen unterstützt: DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL & DVD+RW BD-R, BD-R DL, BD-RE & BD-RE DL Verwenden Sie kein langsames Laufwerk, wie zum Beispiel ein USB 1.1-Festplattenlaufwerk, als Arbeitslaufwerk, da die DVD-Video, AVCHD oder Blu-ray-Disc™ dann möglicherweise nicht beschrieben werden kann. Vermeiden Sie Folgendes: Führen Sie keine anderen Funktionen auf dem Computer aus.
des Systems und der einzelnen Komponenten und verfolgt bestimmte Aktivitäten und ihre Verwendung. Zu den gesammelten Informationen gehört Folgendes: Gerätebetriebszeit und Anzahl von Betätigungen oder Statusänderungen (d. h.
wählen und auf OK klicken, wird das Programm aktiviert. Indem Sie die TOSHIBA PC Health Monitor-Software aktivieren, erklären Sie sich mit den Bedingungen und der Verwendung und Weitergabe der gesammelten Informationen einverstanden. Nachdem das Programm aktiviert wurde, wird der TOSHIBA PC Health Monitor-Bildschirm angezeigt, und das Programm beginnt mit der Überwachung der Systemfunktionen und dem Sammeln von Informationen.
HDD-Schutz Bewegen Sie den Schieberegler nach rechts oder links, um den HDDSchutz zu aktivieren oder zu deaktivieren. Der HDD-Schutz funktioniert nicht, wenn der Computer gestartet wird, sich im Energiesparmodus oder Ruhezustand befindet, in den Ruhezustand wechselt oder aus dem Ruhezustand reaktiviert wird oder ausgeschaltet ist. Achten Sie darauf, den Computer keinen Vibrationen oder Stößen auszusetzen, wenn der Schutz deaktiviert ist.
Schutzstufenverstärkung Wenn der Netzadapter abgetrennt wird, nimmt der HDD-Schutz an, dass der Computer transportiert wird und setzt die Erkennungsstufe für 10 Sekunden auf das Maximum. Standard Sie können die Einstellungen für den HDD-Schutz auf die werkseitigen Standardeinstellungen zurücksetzen, indem Sie auf Standard und dann auf Übernehmen klicken. 3D-Viewer Mit dieser Funktion wird eine 3D-Objekt auf dem Bildschirm angezeigt, dass sich entsprechend der Neigung oder Vibration des Computers bewegt.
Erstellen von Wiederherstellungsmedien In diesem Abschnitt wird beschrieben, wie Sie Wiederherstellungsmedien erstellen können. Schließen Sie den Netzadapter an, wenn Sie Wiederherstellungsmedien erstellen. Schließen Sie alle Softwareprogramme mit Ausnahme von Recovery Media Creator. Deaktivieren Sie Programme (zum Beispiel Bildschirmschoner), die die CPU stark beanspruchen. Betreiben Sie den Computer mit voller Leistung. Verwenden Sie keine Energiesparfunktionen.
3. 4. 5. Legen Sie die erste leere Disc in das optische Laufwerk ein oder schließen Sie den USB-Stick an einen freien USB-Anschluss an. Klicken Sie auf dem Desktop auf Desktop Assist -> Support & Wiederherstellung -> Recovery Media Creator. Nachdem Recovery Media Creator gestartet wurde, wählen Sie den Medientyp sowie den zu kopierenden Titel aus und klicken auf die Schaltfläche Erstellen.
3. 4. 5. Halten Sie die Taste F2 gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Wählen Sie mithilfe der Pfeiltasten nach oben und nach unten die entsprechende Option für Ihr Wiederherstellungsmedium aus. Es wird ein Menü angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm.
2. 3. 4. 5. Halten Sie die Taste 0 (Null) gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Wählen Sie Ja, wenn Sie den Vorgang fortsetzen möchten. Wählen Sie Problembehandlung. Wählen Sie PC auf Originaleinstellung zurücksetzen. Befolgen Sie die Anweisungen auf dem Bildschirm, um die Wiederherstellung abzuschließen. Sie können die Wiederherstellung auch über die PC-Einstellungen im Betriebssystem ausführen: 1. 2. 3. 4.
Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Jeder Benutzer sollte sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden.
Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert sind und das alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen.
Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Falls Sie ein Softwarepaket nicht laden können, kann der Datenträger beschädigt oder das Programm fehlerhaft sein. Versuchen Sie, eine andere Kopie der Software zu laden. Wird bei Verwendung eines Softwarepakets eine Fehlermeldung ausgegeben, schlagen Sie in der mitgelieferten Dokumentation nach. Sie enthält normalerweise ein Kapitel über Fehlersuche oder eine Zusammenfassung aller Fehlermeldungen.
1. 2. 3. Drücken Sie gleichzeitig CTRL, ALT und DEL (einmal) und klicken Sie dann auf Task-Manager. Das Fenster des Windows Task-Managers wird angezeigt. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden. Das Schließen des fehlerhaften Programms ermöglicht es normalerweise, die Arbeit fortzusetzen. Andernfalls fahren Sie mit dem nächsten Schritt fort. Schließen Sie alle noch geöffneten Programme, indem Sie sie nacheinander auswählen und jeweils auf Task beenden klicken.
3. Folgen Sie den Anweisungen auf dem Bildschirm. Hardware- und System-Checkliste In diesem Abschnitt werden Probleme besprochen, die von der Hardware Ihres Computers oder angeschlossenen Peripheriegeräten verursacht werden.
Problem Vorgehensweise Netzadapter versorgt Überprüfen Sie die Anschlüsse, um den Computer nicht sicherzustellen, dass das Netzkabel/der mit Strom Netzadapter fest an den Computer und eine stromführende Steckdose angeschlossen ist. Überprüfen Sie den Zustand des Kabels und der Anschlüsse. Ist das Kabel zerschlissen oder anderweitig beschädigt, ersetzen Sie es durch ein neues. Sind die Anschlüsse verschmutzt, reinigen Sie diese mit einem sauberen Baumwolltuch.
Real Time Clock Problem Vorgehensweise Die BIOSEinstellung und Systemdatum/uhrzeit sind verloren gegangen Der RTC-Akku ist entladen. Gehen Sie folgendermaßen vor, um das Datum und die Uhrzeit im BIOS-Setupprogramm einzustellen: 1. 2. 3. 4. 5. 6. Klicken Sie auf dem Startbildschirm auf das Ein/Aus-Symbol ( ) und wählen Sie Neu starten. Halten Sie die Taste F2 gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Das BIOS-Setup-Utility wird geladen.
Problem Vorgehensweise Keine Anzeige Drücken Sie die Funktionstasten, um das aktive Anzeigegerät zu ändern, sodass kein externer Monitor verwendet wird. Abdrücke auf dem Bildschirm Möglicherweise haben die Tastatur oder das Touchpad den Bildschirm berührt, während er geschlossen war. Versuchen Sie, die Abdrücke durch vorsichtiges Abwischen des Bildschirms mit einem sauberen trockenen Tuch zu entfernen. Verwenden Sie, falls dies nicht funktioniert, einen hochwertigen LCD-Bildschirmreiniger.
Problem Vorgehensweise Kein Zugriff auf CD/ DVD/Blu-ray™ DVD im Laufwerk Überprüfen Sie, ob die Laufwerklade sicher geschlossen ist. Schieben Sie sie vorsichtig nach hinten, bis sie einrastet. Öffnen Sie die Lade und prüfen Sie, ob die Disc richtig eingelegt wurde. Sie sollte ganz gerade und mit der beschrifteten Seite nach oben liegen. Ein Fremdkörper in der Lade könnte das Lesen der Disc verhindern. Überprüfen Sie, ob ein Fremdkörper vorhanden ist. Entfernen Sie den Fremdkörper.
Touchpad Problem Vorgehensweise Das Touchpad funktioniert nicht. Überprüfen Sie die Geräteeinstellungen. Klicken Sie auf dem Desktop auf Desktop Assist > Systemsteuerung -> Hardware und Sound -> Maus. Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung des bewegen Sie die Maus dann erneut. Zeigegeräts Doppeltippen (Touchpad) funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
USB-Maus Problem Vorgehensweise Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung der bewegen Sie die Maus dann erneut. Maus Entfernen Sie die Maus vom Computer und schließen Sie sie an einen freien USB-Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
Problem Vorgehensweise USB-Gerät funktioniert nicht Entfernen Sie das USB-Gerät vom Computer und schließen Sie es an einen freien Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass die USB-Gerätetreiber korrekt installiert sind. Sehen Sie dazu sowohl in der Gerätedokumentation als auch in der Betriebssystemdokumentation nach. Schlaf- und Ladefunktion Weitere Informationen finden Sie im Abschnitt USB-Schlaf- und Ladefunktion.
Problem Vorgehensweise Der Akku entlädt sich schnell, selbst wenn der Computer ausgeschaltet ist. Wenn die Schlaf- und Ladefunktion aktiviert ist, entlädt sich der Akku des Computers im Ruhezustand oder wenn der Computer ausgeschaltet ist. Schließen Sie den Netzadapter an den Computer an oder deaktivieren Sie die Schlaf- und Ladefunktion. An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht.
Problem Vorgehensweise Es wird kein Ton ausgegeben. Drücken Sie die Funktionstasten zum Erhöhen oder Verringern der Lautstärke. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie, ob die Mute-Funktion (Ton aus) aktiviert wurde Überprüfen Sie die Kopfhörerverbindung. Überprüfen Sie im Windows-Geräte-Manager, dass das Audiogerät aktiviert ist und ordnungsgemäß arbeitet.
Problem Vorgehensweise Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit der Funktionstaste das aktive Anzeigegerät, sodass nicht das interne verwendet wird. Überprüfen Sie, dass der externe Monitor angeschlossen ist.
Problem Vorgehensweise Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Vergewissern Sie sich, dass der Schnellstart deaktiviert ist: 1. 2. 3. 4. 5. Klicken Sie auf dem Desktop auf Desktop Assist -> Systemsteuerung -> System und Sicherheit -> Energieoptionen.
Bluetooth Problem Vorgehensweise Kein Zugriff auf das Bluetooth-Gerät Prüfen Sie, ob die drahtlose Kommunikation beim Computer eingeschaltet ist. Überprüfen Sie, ob der Bluetooth Manager auf dem Computer ausgeführt wird und ob das externe Bluetooth-Gerät eingeschaltet ist. Es darf kein optional erhältlicher Bluetooth-Adapter im Computer installiert sein. Die eingebaute Bluetooth-Hardware und ein anderer BluetoothController können nicht gleichzeitig verwendet werden.
Kapitel 7 Anhang Technische Daten In diesem Abschnitt werden die technischen Daten des Computers zusammengefasst. Maße und Gewicht Bei den unten aufgeführten Abmessungen sind Teile, die über die Grundform des Gehäuses hinausragen, nicht berücksichtigt. Die physischen Abmessungen sind modellabhängig. Größe Ca. 377.5 mm x 244.0 mm x 27.0/27.0 mm (B x T x H) Ca. 377.5 mm x 244.0 mm x 27.9/27.9 mm (B x T x H) (überstehende Teile nicht eingeschlossen).
Stromversorgung Netzadapter 100-240 V Wechselstrom 50 oder 60 Hertz Computer 19V DC Pinbelegung beim Anschluss für einen externen RGBMonitor 5 1 10 6 15 11 Pin Signalname Beschreibung I/O 1 CRV Rotes Videosignal O 2 CGV Grünes Videosignal O 3 CBV Blaues Videosignal O 4 Reserviert Reserviert 5 GND Ground, Erdung 6 GND Ground, Erdung 7 GND Ground, Erdung 8 GND Ground, Erdung 9 +5 V Stromversorgung 10 GND Ground, Erdung 11 Reserviert Reserviert 12 SDA Datensig
Netzkabel und Netzstecker Der Stecker des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird. Alle Netzkabel müssen folgenden Spezifikationen entsprechen: Leiterquerschnitt: Minimum 0,75 mm2 Nennstromstärke: Minimum 2,5 Ampere Sicherheitsstandards China: CQC USA und Kanada: UL-gelistet und CSA-zertifiziert Nr.
USA Großbritannien UL-zertifiziert BS-zertifiziert Australien Europa AS-zertifiziert Von der entsprechenden Behörde zertifiziert Kanada China CSA-zertifiziert CCC-zertifiziert Informationen zu drahtlosen Geräten Übergreifende Funktionalität der Drahtlostechnologie Die Wireless-LAN-Funktion ist mit anderen LAN-Systemen kompatibel, die auf der Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing-Funktechnik basieren, und erfüllt die folgenden Standards: IEEE 802.
Sie Bluetooth- und Wireless LAN-Geräte gleichzeitig verwenden, kann die Netzwerkleistung möglicherweise beeinträchtigt werden; unter Umständen wird die Netzwerkverbindung sogar getrennt. Schalten Sie in diesem Fall umgehend eines der Geräte ab. Bitte besuchen Sie die Website http://www.pc.support.global.toshiba.com , wenn Sie Fragen zur Verwendung der Wireless-LAN- oder Bluetooth-Module haben. In Europa: http://www.toshiba-europe.com/computers/tnt/bluetooth.
Verwenden Sie die Wireless LAN- (Wi-Fi) oder Bluetooth-Funktionen nicht in der Nähe von Mikrowellengeräten oder in Gebieten, die Funkstörungen oder magnetischen Feldern ausgesetzt sind. Störungen durch Mikrowellengeräte oder andere Quellen können den Wi-Fi- oder Bluetooth-Betrieb unterbrechen. Schalten Sie alle Drahtlosfunktionen aus, wenn sich eine Person mit einem Herzschrittmacher oder einem anderen medizinischen elektrischen Gerät in der Nähe befindet.
Funkmerkmale Die Funkeigenschaften von Wireless LAN-Modulen können in Abhängigkeit von den folgenden Punkten variieren: Land/Vertriebsgebiet, in dem das Produkt erworben wurde Produkttyp Die drahtlose Kommunikation unterliegt häufig den nationalen Vorschriften für den Funkverkehr.
Die in den Computer integrierten Bluetooth-Funktionen und ein externer Bluetooth-Adapter können nicht gleichzeitig verwendet werden. Die Bluetooth-Drahtlostechnologie verfügt über die folgenden Merkmale: Sicherheit Zwei moderne Sicherheitsmechanismen gewährleisten eine hohe Sicherheitsstufe: Die Authentifizierung verhindert den Zugriff auf kritische Daten und die Vertuschung der Herkunft einer Nachricht. Die Verschlüsselung verhindert das „Abhören“ und gewährleistet die Vertraulichkeit der Verbindung.
Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden. Für die öffentliche Verwendung ist eine allgemeine Autorisierung erforderlich. Luxemburg: Implementiert Allgemeine Autorisierung erforderlich für Netzwerk- und Dienstbereitstellung. Norwegen: Implementiert Dieser Teilabschnitt gilt nicht für das Gebiet in einem Umkreis von 20 km um das Zentrum von NyÅlesund.
Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2. Zur Verwendung für lokale Netzwerke zur Kommunikation von Bordbesatzungen im Bereich des Flughafens und während aller Flugphasen zugelassen. Zur Verwendung für öffentlich zugängliche lokale Netzwerke an Bord von Flugzeigen während des Flugs in Flughöhen über 3000 m zugelassen.
Um den europäischen Gesetzen zum Betrieb von Wireless LANs zu entsprechen, gelten die obigen Einschränkungen für die Verwendung der 2,4- und 5-GHz-Kanäle nur für den Betrieb im Freien. Überprüfen Sie bitte mithilfe der Wireless LAN Utility, welcher Kanale jeweils für den Betrieb verwendet wird.
Die abgegebene Strahlung des drahtlosen Geräts liegt weit unter den entsprechenden Grenzwerten der FCC. Trotzdem sollte das drahtlose Gerät so verwendet werden, dass beim normalen Betrieb das Risiko des Kontakts mit der Strahlung minimiert wird. Bei normaler Betriebskonfiguration sollte der Abstand zwischen der Antenne und dem Benutzer mindestens 20 cm betragen. Die genaue Position der Antenne können Sie den Benutzerhandbuch entnehmen.
1. Wichtiger Hinweis Dieses Gerät kann in derselben Frequenzbandbreite arbeiten wie industrielle, wissenschaftliche oder medizinische Geräte, Mikrowellengeräte, lizenzierte Funkstationen und nicht lizenzierte Niedrigenergiefunkstationen zur mobilen Objekterkennung (RFID), die in Fertigungsanlagen verwendet werden ( = Sonstige Funkstationen). 1. 2. 3. Vergewissern Sie sich vor der Verwendung dieses Geräts, dass es keine Störungen der oben genannten Einrichtungen verursacht.
4. : Dieses Gerät verwendet eine Frequenzbandbreite von 2.400MHz bis 2.483,5 MHz. Es ist nicht möglich, das Frequenzband von mobilen Objektidentifikationssystemen zu vermeiden. 4. Informationen zur JEITA 5 GHz Wireless LAN unterstützt den Kanal W52/W53/W56. Geräteautorisierung Dieses Gerät trägt die Technical Regulation Conformity Certification und gehört zur Geräteklasse von Funkeinrichtungen von NiedrigenergieDatenkommunikationssystemen gemäß den entsprechenden japanischen Gesetzen.
Funkzulassungen für drahtlose Geräte Dieses Gerät ist gemäß den Funkstandards der in der folgenden Tabelle aufgeführten Länder/Gebiete zugelassen. Wenn Sie dieses Gerät in Ländern/Regionen verwenden, die in der folgenden Tabelle nicht aufgeführt sind, wenden Sie sich an den TOSHIBA-Support.
bei Verwendung von Standard-Telefonleitungen oder langsamen Netzwerkverbindungen bei Verwendung komplexer Design-Software, zum Beispiel CADProgramme bei gleichzeitiger Verwendung mehrerer Anwendungen oder Funktionalitäten bei Verwendung des Computers in Gebieten mit niedrigem Luftdruck (zum Beispiel über 1000 m über NN) bei Verwendung des Computers unter Temperaturbedingungen außerhalb des Bereichs zwischen 5° C und 30° C bzw. über 25° C in großen Höhen.
Verschiedene Systemkomponenten (z. B. die GPU des Grafikadapters und PCI-Geräte wie Wireless LAN) benötigen ihren eigenen Speicher. Da ein 32-Bit-Betriebssystem nicht mehr als 4 GB Speicher adressieren kann, überschneiden diese Systemressourcen sich mit dem physischen Speicher. Es ist eine technische Einschränkung, dass der sich überschneidende Speicher dem Betriebssystem nicht zur Verfügung steht.
Grafikchip (Graphics Processing Unit, GPU) Die Leistung des Grafikchips (GPU) variiert je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen. Die GPU-Leistung ist nur im Netzbetrieb optimal und kann im Akkubetrieb erheblich absinken. Der gesamte verfügbare Grafikspeicher ist die Summe des dedizierten Grafikspeichers, des Systemgrafikspeichers und des gemeinsam genutzten Systemspeichers.
Stichwortverzeichnis A Touchpad 6-10 Akku Echtzeituhr 4-26 Energiesparmodus 5-8 Kapazität überwachen 4-28 Lebensdauer verlängern 4-29 Typen 4-26 DVD-Super-Multi-Laufwerk schreiben 4-10 verwenden 4-7 E Energiesparmodus automatisch 5-7 einstellen 2-10 Akku-Anzeige 3-13 Anzeige „DC IN/Akku“ 3-13 Externer Monitor Probleme 6-14 Anzeigemodus 4-45 ASCII-Zeichen 4-6 Audiosystem Probleme 6-13 F Festplatte automatische Abschaltung 5-7 B Bildschirm Anzeige 3-8 automatische Abschaltung 5-7 öffnen 2-6 Bluetooth
L Stromversorgung 6-5 Tastatur 6-7 Touchpad 6-10 Unterstützung von TOSHIBA 6-17 USB-Gerät 6-11 USB-Maus 6-11 LAN anschließen 4-31 Kabeltypen 4-31 LCD Scharniere 3-8 R RecoveryFestplattenlaufwerk 5-28 Lüftungsschlitze 3-5, 3-9 M Reinigen des Computers 1-19 MultiMediaCard entfernen 4-40 SD/SDHC/SDXC-Karten formatieren 4-38 Hinweis 4-37 N Netzadapter anschließen 2-4 DC IN 19V-Buchse 3-3 zusätzlicher 4-44 Neustarten des Computers 2-10 P Probleme Abschaltung bei Überhitzung 6-5 Akku 6-6 Analyse des Prob
T Tastatur Funktionstasten 4-4 Funktionstasten F1...