Benutzerhandbuch C55-C/C55D-C L50-C/L50D-C P50-C/P50t-C/P50D-C
Inhaltsverzeichnis Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit Copyright, Haftungsausschluss und Marken ..................................... 1-1 Zulassungsbestimmungen ................................................................... 1-2 Videostandardhinweis .......................................................................... 1-9 ENERGY STAR® Programm ............................................................... 1-10 Entsorgung des Computers und der Akkus .................
Zusätzliche Speichermodule .............................................................. 4-26 Speichermedium ................................................................................. 4-30 Externer Monitor .................................................................................. 4-34 Sicherheitsschloss .............................................................................. 4-37 Optionales TOSHIBA-Zubehör ...........................................................
Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit In diesem Kapitel werden rechtliche sowie zulassungs- und sicherheitsrelevante Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Copyright, Haftungsausschluss und Marken Copyright © 2015 TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig.
Marken Intel, Intel SpeedStep, Intel Core und Centrino sind Marken oder eingetragene Marken der Intel Corporation. AMD, das AMD Arrow-Logo, PowerPlay, Vari-Bright und Kombinationen davon sind Marken von Advanced Micro Devices, Inc. Windows, Microsoft und das Windows-Logo sind eingetragene Marken der Microsoft Corporation. Die Bluetooth®-Marke und -Logos sind eingetragene Marken im Besitz von Bluetooth SIG, Inc.
Aus- und Einschalten festgestellt werden. In diesem Fall empfiehlt es sich, einen oder mehrere der folgenden Schritte auszuführen: Richten Sie die Antenne neu aus. Vergrößern Sie den Abstand zwischen dem Gerät und dem Empfänger. Schließen Sie das Gerät und den Empfänger an unterschiedliche Stromkreise an. Wenden Sie sich an den Händler oder an einen erfahrenen Rundfunk-/Fernsehtechniker. An dieses Gerät dürfen nur Peripheriegeräte angeschlossen werden, die den FCC-Bestimmungen der Klasse B entsprechen.
Erklärung zur EU-Konformität Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit den entsprechenden europäischen Richtlinien. Verantwortlich für die CE-Kennzeichnung ist die TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Deutschland. Den vollständigen und offiziellen Text der EU-Konformitätserklärung finden Sie auf der TOSHIBA-Website http://epps.toshiba-teg.com im Internet.
Für alle eventuellen Folgen, die aufgrund der Verwendung dieses Produkts in nicht geeigneten Arbeitsumgebungen entstehen könnten, ist TOSHIBA nicht verantwortlich.
Die folgenden Informationen gelten nur für die Mitgliedstaaten der EU: Entsorgung von Produkten Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Produkte getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Eingebaute Batterien und Akkus können zusammen mit dem Produkt entsorgt werden. Sie werden in den Recyclingzentralen entnommen und gesondert entsorgt. Der schwarze Balken zeigt an, dass das Produkt nach dem 13. August 2005 auf den Markt gebracht wurde.
Entsorgung von Batterien und/oder Akkus Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Batterien und/oder Akkus getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Wenn die Batterie oder der Akku mehr als die in der europäischen Batterie-Richtlinie spezifizierten Wert für Blei (Pb), Quecksilber (Hg) und/oder Kadmium (Cd) enthält, werden die chemischen Symbole für Blei (Pb), Quecksilber (Hg) und/oder Kadmium unter dem Symbol mit der durchgestrichenen Mülltonne angezeigt.
Die folgenden Informationen gelten nur für die Türkei: Entsorgung von Produkten: Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass dieses Produkt getrennt vom Hausmüll gesammelt und entsorgt werden muss. Am Ende seiner Lebensdauer sollte das Produkt zum Schutz der Umwelt und der Gesundheit beim nächsten Recyclingcenter oder Wertstoffhof abgegeben werden.
Diese Symbole sind bei Ihrem Modell möglicherweise nicht vorhanden; dies richtet sich nach dem Land/Gebiet, in dem Sie das Gerät gekauft haben. Videostandardhinweis DIESES PRODUKT WIRD FÜR PERSÖNLICHEN, NICHTKOMMERZIELLEN GEBRAUCH UNTER DER AVC-, VC1- UND MPEG-4PATENTPORTFOLIOLIZENZ AN ENDKONSUMENTEN LIZENZIERT. HIERDURCH IST ES DIESEN MÖGLICH (I) VIDEOS UNTER EINHALTUNG DER OBEN GENANNTEN STANDARDS („VIDEO“) ZU CODIEREN BZW.
ENERGY STAR® Programm Ihr Computermodell erfüllt möglicherweise die ENERGY STAR®-Bestimmungen. Falls dies auf Ihr Modell zutrifft, ist es mit dem Energy Star-Logo gekennzeichnet, und es gelten die folgenden Informationen. TOSHIBA ist Partner im ENERGY STAR Program und hat diesen Computer so entwickelt, dass die ENERGY STARRichtlinien für die Energieeffizienz eingehalten werden.
Sicherheitshinweise für optische Laufwerke Beachten Sie bitte unbedingt die Hinweise am Ende dieses Abschnitts. Das Laufwerkmodell enthält ein Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden.
Vorsichtsmaßnahmen VORSICHT: Dieses Gerät arbeitet mit einem Lasersystem und ist als „PRODUKT DER LASERSCHUTZKLASSE 1“ eingestuft. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an das nächste autorisierte Service-Center, wenn Probleme mit diesem Modell auftreten. Öffnen Sie das Gehäuse nicht, um zu vermeiden, dass Sie dem Laserstrahl direkt ausgesetzt werden.
Eine Überhitzung von Computer oder Netzadapter könnte zu einem Systemausfall, zu Schäden an Computer oder Netzadapter oder zu einem Brand führen, was schwere Verletzungen zur Folge haben kann. Computerfreundliche Umgebung einrichten Stellen Sie den Computer auf einer ebenen Oberfläche ab, die ausreichend Platz für den Computer sowie das gesamte erforderliche Zubehör (z. B. Drucker) bietet. Lassen Sie genügend Platz um den Computer und die Peripheriegeräte herum, damit die Lüftung gewährleistet ist.
Auch das Gehäuse des Netzadapters wird bei längerer Verwendung warm. Dieser Zustand weist nicht auf eine Fehlfunktion hin. Ziehen Sie den Netzadapter ab und lassen Sie ihn abkühlen, bevor Sie ihn transportieren. Legen Sie den Netzadapter nicht auf hitzeempfindlichem Material ab, da dieses sonst beschädigt werden könnte. Schäden durch Druck- oder Stoßeinwirkung Setzen Sie den Computer keinem starken Druck aus und lassen Sie keine Gegenstände auf ihn fallen.
Fahren Sie den Computer herunter, trennen Sie den Netzadapter vom Computer und lassen Sie diesen abkühlen, bevor Sie ihn transportieren. Bei Nichtbefolgung dieser Anweisung kann es zu leichteren Verbrennungen kommen. Setzen Sie den Computer keinen schnellen Temperaturänderungen aus (zum Beispiel, wenn Sie den Computer aus einer kalten Umgebung in ein geheiztes Zimmer bringen). Schalten Sie das Gerät nicht ein, solange es Kondensation gibt. Setzen Sie den Computer keinen Stößen aus.
führen kann, die möglicherweise kleinere Verletzungen zur Folge haben können. Bitte lesen. Ein Hinweis ist eine Anmerkung oder ein Ratschlag, der Ihnen bei der optimalen Nutzung Ihrer Geräte hilft.
Kapitel 2 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde, funktionieren einige der in diesem Handbuch beschriebenen Merkmale möglicherweise nicht korrekt. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
Rechtsklick Klicken Sie einmal mit der rechten Touchpad-Steuerungstaste. Klicken Sie einmal mit der rechten Maustaste. Berühren und halten Sie den Touchscreen (nur bei Modellen mit Touchscreen). Doppelklicken Tippen Sie zweimal auf das Touchpad oder klicken Sie zweimal mit der linken Touchpad-Klicktaste. Klicken Sie zweimal mit der linken Maustaste. Tippen Sie zweimal auf den Touchscreen (nur bei Modellen mit Touchscreen).
Formatieren Sie Speichermedien nie, ohne zuvor den Inhalt zu überprüfen - beim Formatieren werden alle gespeicherten Daten gelöscht. Es ist empfehlenswert, den Inhalt des eingebauten Festplattenlaufwerks oder anderer wichtiger Speichergeräte regelmäßig auf externen Medien zu sichern. Die allgemein verwendeten Speichermedien sind nicht dauerhaft stabil; unter bestimmten Umständen können Daten verloren gehen.
Das mitgelieferte Netzkabel entspricht den Sicherheitsvorschriften und Bestimmungen in der Vertriebsregion, in der der Computer gekauft wurde, und sollte nicht außerhalb dieser Region verwendet werden. Für die Verwendung in anderen Ländern/Gebieten erwerben Sie Netzkabel, die den jeweiligen Sicherheitsvorschriften und Bestimmungen entsprechen. Verwenden Sie keinen 3-zu-2-Kontaktadapter.
2. Stecken Sie den Gleichstromausgangsstecker des Netzadapters in den 19-V-Gleichstromeingang (DC IN) des Computers. Abbildung 2-3 Gleichstromausgangsstecker an den Computer anschließen 2 1 1. 19-V-Gleichstromeingang (DC IN) 2. Gleichstromausgangsstecker Darstellung kann je nach Modell abweichen. 3. Schließen Sie das Netzkabel an eine Steckdose an. Die Anzeige DC IN/Akku leuchtet.
Gehen Sie beim Öffnen und Schließen des Bildschirms mit Vorsicht vor. Öffnen Sie ihn nicht ruckartig und lassen Sie ihn nicht heftig zufallen, um Schäden am Computer zu vermeiden. Achten Sie darauf, beim Schließen des Bildschirms nicht mit dem Finger zwischen LCD und Akku zu geraten; Sie könnten sich verletzen. Klappen Sie den Bildschirm nicht zu weit auf, da hierbei die Scharniere des Bildschirms zu großen Belastungen ausgesetzt werden und es zu Beschädigungen kommen kann.
Die Lautstärke kann während des Windows-Setups nicht eingestellt werden. 1. 2. Öffnen Sie den Bildschirm. Betätigen Sie die Ein/Aus-Taste. Abbildung 2-5 Einschalten 1 1. Ein/Aus-Taste Darstellung kann je nach Modell abweichen. Ersteinrichtung Der Einrichtungsbildschirm von Windows ist der erste Bildschirm, der nach dem Einschalten angezeigt wird. Folgen Sie den Anweisungen in den einzelnen Bildschirmen, um das Betriebssystem richtig zu installieren.
Mit Meistverwendet haben Sie schnell Zugriff auf Apps, die Sie häufig verwenden, während unter Zuletzt hinzugefügt die zuletzt installierten Apps hervorgehoben sind. Sie können Ihre bevorzugten Apps in einem kachelähnlichen Muster an das Startmenü anheften und gruppieren. Typische Kacheln sind zum Beispiel Kontakte und Mail. In den Kacheln werden dynamische Informationen aus Apps angezeigt, ohne dass Sie diese öffnen müssen.
Einstellungen Über Einstellungen haben Sie Zugriff auf Systemeinstellungen einschließlich erweiterter Einstellungen in der Systemsteuerung. Sie sind in Kategorien aufgeteilt, sodass Sie Windows konfigurieren, optimieren oder personalisieren können. Sie können auch ein Stichwort eingeben und mit Suchen jede Einstellung finden. Um die Einstellungen zu öffnen, klicken Sie auf Start -> Alle Apps -> Einstellungen ( ).
Beenden-Modus Wenn Sie den Computer im Beenden-Modus ausschalten, werden keine Daten gespeichert und es wird beim nächsten Start der Hauptbildschirm des Betriebssystems angezeigt. 1. 2. Sichern Sie eingegebene Daten auf der Festplatte oder auf einem anderen Speichermedium. Wenn der Computer auf keines der Laufwerke mehr zugreift, nehmen Sie die Disc aus dem entsprechenden Laufwerk.
Wenn Sie den Computer an Bord eines Flugzeugs oder in Umgebungen, in denen elektronische Geräte gesteuert oder reguliert werden, ausschalten müssen, fahren Sie den Computer immer herunter. Dazu gehört das Ausschalten aller drahtlosen Kommunikationsfunktionen und das Deaktivieren von Einstellungen, die den Computer automatisch einschalten, zum Beispiel programmierte Aufnahmen.
Vorteile des Energiesparmodus Der Energiesparmodus bietet die folgenden Vorteile: Die zuletzt verwendete Arbeitsumgebung wird schneller als im Ruhezustand wiederhergestellt. Sie sparen Energie, indem das System heruntergefahren wird, wenn während eines bestimmten Zeitraums, dessen Länge mit der Funktion „System-Energiesparmodus“ festgelegt wird, keine Eingaben oder Hardwarezugriffe erfolgen. Sie können die LCD-gesteuerte Ausschaltung verwenden.
Speichern Sie Ihre Arbeit. Wird der Ruhezustand aktiviert, speichert der Computer den Inhalt des Arbeitsspeichers auf der Festplatte. Aus Sicherheitsgründen sollten Sie die Daten jedoch auch selbst speichern. Wenn Sie den Netzadapter trennen, bevor der Speichervorgang abgeschlossen ist, gehen Daten verloren. Um Datenverlust zu vermeiden, bauen Sie keine Speichermodule ein oder aus, wenn sich der Computer im Ruhezustand befindet (gilt nur für Modelle mit Speichermodulabdeckung).
Automatisches Aktivieren des Ruhezustands Der Computer kann so konfiguriert werden, dass er automatisch in den Ruhezustand wechselt, wenn Sie die Ein/Aus-Taste betätigen oder den Bildschirm zuklappen. Gehen Sie folgendermaßen vor, um diese Einstellungen zu definieren: 1. 2. 3. Klicken Sie auf Energieoptionen und dann auf Auswählen, was beim Drücken des Netzschalters geschehen soll oder Auswählen, was beim Zuklappen des Computers geschehen soll.
können Sie das System wiederherstellen, nachdem Sie die Festplatte gelöscht haben. Erstellen von Wiederherstellungsmedien In diesem Abschnitt wird beschrieben, wie Sie Wiederherstellungsmedien erstellen können. Schließen Sie den Netzadapter an, wenn Sie Wiederherstellungsmedien erstellen. Schließen Sie alle Softwareprogramme mit Ausnahme von Recovery Media Creator. Deaktivieren Sie Programme (zum Beispiel Bildschirmschoner), die die CPU stark beanspruchen. Betreiben Sie den Computer mit voller Leistung.
USB-Flash-Speicher wird formatiert und alle Daten im USB-FlashSpeicher gehen verloren, wenn Sie den Vorgang fortsetzen. 2. 3. 4. 5. Schalten Sie den Computer ein. Der Computer lädt das Betriebssystem Windows wie gewohnt vom Festplattenlaufwerk aus. Legen Sie die erste leere Disc in das optische Laufwerk ein oder schließen Sie den USB-Stick an einen freien USB-Anschluss an. Klicken Sie auf Recovery Media Creator in der Gruppe TOSHIBA in Alle Apps.
1. 2. 3. 4. 5. Legen Sie das Wiederherstellungsmedium in das optische Laufwerk ein oder schließen Sie den Recovery-USB-Stick an einen der verfügbaren USB-Anschlüsse an. Klicken Sie auf Start -> Ein/Aus und wählen Sie Neu starten. Halten Sie die Taste F12 gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Wählen Sie mithilfe der Pfeiltasten nach oben und nach unten die entsprechende Option für Ihr Wiederherstellungsmedium aus. Es wird ein Menü angezeigt.
Wenn Sie das Windows-Betriebssystem neu installieren, wird die Festplatte neu formatiert, wobei alle darauf gespeicherten Daten gelöscht werden. 1. 2. 3. 4. Benutzerhandbuch Klicken Sie auf Start -> Ein/Aus und wählen Sie Neu starten. Halten Sie die Taste 0 (Null) gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Wählen Sie Problembehandlung -> TOSHIBA Maintenance Utility > TOSHIBA HDD Recovery.
Kapitel 3 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie im Abschnitt Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
Linke Seite Diese Abbildung zeigt die linke Seite des Computers. Abbildung 3-2 Linke Seite des Computers 1 2 3 4 1. 19-V-Gleichstromeingang (DC IN) 2. LAN-Buchse 3. USB-Anschluss (USB 2.0 oder 3.0) 5 4. USB-Anschluss (USB 2.0 oder 3.0)* 5. Optisches Laufwerk* * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. 19-V-Gleichstromeingang (DC IN) Der Netzadapter wird an diese Buchse angeschlossen, um den Computer mit Strom zu versorgen und die internen Batterien aufzuladen.
USB-Anschluss (USB Ein oder zwei USB-Anschlüsse, die dem USB2.0 oder 3.0) Standard 2.0 oder 3.0 entsprechen, befinden sich auf der linken Seite des Computers. Der USB-Anschlusstyp ist modellabhängig. Der blau gekennzeichnete Anschluss entspricht USB 3.0 Der USB-3.0-Anschluss entspricht dem Standard USB 3.0 und ist mit USB-2.0-Geräten abwärtskompatibel. Der USB-2.0-Anschluss ist nicht mit USB-3.0Geräten kompatibel.
Abbildung 3-3 Rechte Seite des Computers 1 2 3 1. Speichermediensteckplatz 2. Kopfhörer/Mikrofon-Kombibuchse 3. USB-Anschluss (USB 3.0) 4. USB-Anschluss (USB 2.0 oder 3.0) Speichermediensteckplatz 4 5 6 7 5. HDMI-Ausgang 6. Lüftungsschlitze 7. Schlitz für ein Sicherheitsschloss In diesen Steckplatz können Sie eine Karte des folgenden Typs einsetzen: SD™/SDHC™/ SDXC™-Speicherkarte, miniSD™/microSD™ Card und MultiMediaCard™. Nähere Informationen finden Sie im Abschnitt Speichermedien.
HDMI-Ausgang An den HDMI-Ausgang können Sie ein HDMIKabel (Typ A) anschließen. Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Schlitz für ein Sicherheitsschloss Ein Sicherheitskabel kann an diesem Schlitz befestigt und dann mit einem Schreibtisch oder einem anderen großen Gegenstand verbunden werden, um einen Diebstahl des Computers zu verhindern. Rückseite Diese Abbildung zeigt die Rückseite des Computers. Abbildung 3-4 Rückseite des Computers 1 1.
Abbildung 3-5 Unterseite des Computers 1 2 1 1 3 2 1 1. Lüftungsschlitze 2. Lüftungsschlitze* 3. Speichermodulabdeckung* * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Blockieren Sie die Lüftungsschlitze nicht. Achten Sie darauf, dass keine Metallgegenstände, z. B. Schrauben, Heftklammern und Büroklammern in die Lüftungsschlitze gelangen.
Vorderseite mit geöffnetem Bildschirm Diese Abbildung zeigt den Computer mit geöffnetem Bildschirm. Um den Bildschirm zu öffnen, klappen Sie ihn auf und stellen Sie einen angenehmen Neigungswinkel ein. Abbildung 3-6 Vorderseite des Computers mit geöffnetem Bildschirm 1 2 3 4 5 6 8 8 7 9 10 11 12 A B 13 13 14 14 Abbildung 3-7 Oberseite des Modells mit Touchscreen 2 3 1 4 5 1. Mikrofon 2. Webcam-LED 3. Webcam 4. Mikrofon* 5. Antennen für die drahtlose Kommunikation (nicht abgebildet) 6.
Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen importieren und aufnehmen. Weitere Informationen dazu finden Sie im Abschnitt Soundsystem und Videomodus. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist. Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können. Sie können es für VideoChats oder Videokonferenzen einsetzen, wenn Sie ein Kommunikationstool verwenden.
Rechtliche Hinweise (LCD) Weitere Informationen zum LCD finden Sie im Abschnitt Rechtliche Hinweise. Stereolautsprecher Über die Lautsprecher werden der von der verwendeten Software erzeugte Klang sowie die vom System erzeugten akustischen Alarmsignale, zum Beispiel bei niedriger Akkuladung, ausgegeben. Bildschirmscharniere Die Bildschirmscharniere ermöglichen die Positionierung des Bildschirms in einer Vielzahl von angenehmen Betrachtungswinkeln.
Touchpad Das Touchpad befindet sich in der Handballenauflage und wird zur Steuerung des Bildschirmzeigers verwendet. Legen Sie Ihren Finger auf das Touchpad und bewegen Sie ihn in die gewünschte Richtung. Der Bildschirmzeiger folgt Ihren Bewegungen. Touchpad-Klicktasten Die zwei Tasten am unteren Rand des Touchpads entsprechen den beiden Tasten einer Standardmaus.
Festplatte oder Solid- Die Kapazität des Festplattenlaufwerks ist State Drive modellabhängig. Bitte beachten Sie, dass ein Teil der FestplattenGesamtkapazität für Verwaltungszwecke reserviert ist. Einige Modelle sind statt mit einem Festplattenlaufwerk mit einem „Solid-State Drive“ (SSD) ausgestattet. In diesem Handbuch bezieht sich die Bezeichnung „HDD“ oder „Festplattenlaufwerk“ auch auf die SSD, außer dies ist anders angegeben.
Grafikchip Die Leistung des Grafikchips (GPU) variiert je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen. Die GPU-Leistung ist nur im Netzbetrieb optimal und kann im Akkubetrieb erheblich absinken. Rechtliche Hinweise (Grafikchip, „GPU“) Weitere Informationen zur Grafikprozessoreinheit (GPU) finden Sie im Abschnitt Rechtliche Hinweise.
Klicken Sie mit der rechten Maustaste auf den Desktop und wählen Sie AMD VISION Engine Control Center/Catalyst Control Center. In dieser Steuerung: 1. 2. Wählen Sie PowerPlay™ unter Power. Aktivieren Sie das Kontrollkästchen Enable PowerPlay™ (PowerPlay™ aktivieren), ebenso wie das Kontrollkästchen Enable Vari-Bright™ (Vari-Bright™ aktivieren).
NVIDIA® GeForce ExperienceTM kann nicht alle PC-Spiele optimieren. Sie können überprüfen, ob ein bestimmtes Spiel unterstützt wird, indem Sie Folgendes wählen:Preferences -> General -> Supported games. Auch wenn ein bestimmtes Spiel unterstützt wird, sind in der NVIDIA Cloud möglicherweise nicht die für die Optimierung des Spiels erforderlichen Daten vorhanden.
Weiß Der Computer wird mit Strom versorgt und ist eingeschaltet. Weiß blinkend Der Computer befindet sich im Energiesparmodus und wird ausreichend mit Strom versorgt (Netzadapter oder Akku), um diesen Zustand beizubehalten. Leuchtet nicht Unter allen sonstigen Bedingungen leuchtet die Anzeige nicht.
Kapitel 4 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchscreens Einige Modelle sind mit einem Touchscreen ausgestattet. Sie können Symbole, Schaltflächen, Menüpunkte, die Bildschirmtastatur und andere Elemente auf dem Touchscreen mit dem Finger bedienen.
Wischen Bewegen Sie Ihren Finger ohne Pause nach dem ersten Aufsetzen schnell vom Bildschirmrand nach innen. Vom linken Rand aus wischen: Zeigt alle geöffneten Apps in der Taskansicht an. Vom rechten Rand aus wischen: Öffnet das Wartungscenter. Vom oberen Rand aus wischen: Zeigt Titelleisten von Apps im Vollbild an. Details und erweiterte Touchscreengesten für die Interaktion mit dem Windows-Betriebssystem sind unter Erste Schritte beschrieben.
Einige der in diesem Abschnitt beschriebenen Touchpadvorgänge werden nur von bestimmten Anwendungen unterstützt. Tastatur Die Anzahl der Tasten auf der Tastatur ist davon abhängig, für welches Land/Gebiet der Computer konfiguriert wurde. Es stehen Tastaturbelegungen für verschiedene Sprachen zur Verfügung. Auf der Tastatur befinden sich verschiedene Tastentypen: Schreibmaschinentasten, Funktionstasten, Windows-Sondertasten und Tasten der integrierten numerischen Tastatur.
Funktionstasten Die Funktionstasten (F1~F12) sind die zwölf Tasten oben auf der Tastatur. Sie können den Funktionstastenmodus als „Sonderfunktionsmodus“ oder als „F1-F12 Standardmodus“ konfigurieren, indem Sie auf System Settings -> Funktionstaste klicken (in der Gruppe TOSHIBA in Alle Apps). Im Sonderfunktionsmodus können Sie Sonderfunktionen nutzen, ohne dass Sie die Taste FN drücken müssen.
Sonderfunktionsmodus F1-F12 Standardmodus Funktion F12 FN+F12 Schaltet den Flugmodus ein oder aus. FN+1 FN+1 Verkleinert die auf dem Desktop angezeigten Symbole oder die im Anwendungsfenster angezeigte Schriftart. FN+2 FN+2 Vergrößert die auf dem Desktop angezeigten Symbole oder die im Anwendungsfenster angezeigte Schriftart. FN +LEERTASTE FN +LEERTASTE Ändert die Bildschirmauflösung. FN+ FN+ Schaltet die Tastaturbeleuchtung ein oder aus.
Erzeugen von ASCII-Zeichen Nicht alle ASCII-Zeichen lassen sich mit den normalen Tasten erzeugen. Sie können diese Zeichen jedoch mithilfe der spezifischen ASCII-Codes erzeugen. 1. 2. 3. Halten Sie die ALT-Taste gedrückt. Geben Sie den ASCII-Code des gewünschten Zeichens über die Tasten des Ziffernblocks ein. Lassen Sie die Alt-Taste los. Das ASCII-Zeichen wird nun auf dem Bildschirm angezeigt. Optisches Laufwerk Bei einigen Modellen ist ein DVD-Super-Multi-Laufwerk oder ein Blu-ray™Brenner installiert.
2. Fassen Sie die Laufwerklade vorsichtig an und ziehen Sie sie vollständig auf. Abbildung 4-2 Entnahmetaste drücken und Laufwerklade öffnen. 2 1 1. Entnahmetaste 3. 2. Laufwerklade Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerklade. Abbildung 4-3 Disc einlegen 1 1. Laserlinse Wenn die Laufwerklade vollständig geöffnet ist, ragt das Gehäuse des Computers etwas über die Lade hinaus. Deshalb müssen Sie die Disc beim Einlegen leicht geneigt halten.
Falls die Disc beim Schließen der Laufwerklade nicht korrekt eingelegt ist, kann sie beschädigt werden. Außerdem lässt sich die Laufwerklade dann möglicherweise nicht mehr vollständig öffnen, wenn Sie auf die Entnahmetaste drücken. Entnahme von Discs So nehmen Sie eine Disc aus der Laufwerklade Drücken Sie nicht auf die Entnahmetaste, während der Computer noch auf das optische Laufwerk zugreift. Warten Sie, bis die Anzeige „Optisches Laufwerk“ nicht mehr leuchtet, bevor Sie die Laufwerklade öffnen.
Schalten Sie den Computer aus, bevor Sie die manuelle Entnahmeöffnung verwenden. Wenn sich die Disc beim Öffnen der Laufwerklade noch dreht, könnte sie herausfliegen und Verletzungen verursachen. Beschreibbare Discs Dieser Abschnitt führt die Typen beschreibbarer Discs auf. Informieren Sie sich in den Spezifikationen für Ihr Laufwerk über die Disc-Typen, die damit beschrieben werden können. CDs CD–Rs lassen sich nur einmal beschreiben. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden.
Wichtiger Hinweis Bevor Sie vom optischen Laufwerk unterstützte Medien beschreiben oder wiederbeschreiben, sollten Sie alle Setup- und Bedienungshinweise in diesem Abschnitt durchlesen und befolgen. Andernfalls funktioniert das optische Laufwerk möglicherweise nicht richtig und Daten werden nicht erfolgreich geschrieben. So können Sie Daten verlieren oder das Laufwerk oder Medium beschädigen.
DVD-R: DVD-Spezifikationen für beschreibbare Discs für GeneralVersion 2.0 TAIYO YUDEN Co., Ltd. (für Medien mit 8- und 16-facher Geschwindigkeit) MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8- und 16facher Geschwindigkeit) DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 4-facher oder 8-facher Geschwindigkeit) DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8- und 16facher Geschwindigkeit) DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD.
BD-RE TL: Panasonic Corporation Einige Arten und Formate von DVD-R DL- und DVD+R DL-Discs können möglicherweise nicht gelesen werden. Discs, die als DVD-R DL format4 (Layer Jump Recording) erstellt wurden, können nicht gelesen werden. Während des Beschreibens oder Wiederbeschreibens von Discs Beachten Sie während des Schreibens oder Wiederbeschreibens von Discs die folgenden Punkte: Kopieren Sie die Daten von der Festplatte auf das optische Medium.
CyberLink PowerDVD for TOSHIBA Beachten Sie bei der Verwendung von CyberLink PowerDVD for TOSHIBA Folgendes: Hinweise zur Verwendung Diese Software kann nur mit Windows-Betriebssystemen verwendet werden. CyberLink PowerDVD for TOSHIBA ist nur bei Modellen verfügbar, die mit einem DVD-Super-Multi-Laufwerk konfiguriert sind. Die Software CyberLink PowerDVD for TOSHIBA zum Abspielen von DVDs und Videodateien ist im Lieferumfang enthalten.
Sperren Sie den Computer nicht mithilfe der Tastenkombinationen ) + L, wenn CyberLink PowerDVD for TOSHIBA Windows-Logo ( ausgeführt wird. CyberLink PowerDVD for TOSHIBA unterstützt keine Kinderschutzfunktion. Führen Sie die Installation/Deinstallation von CyberLink PowerDVD for TOSHIBA unter einem Benutzerkonto mit Administratorrechten aus. Wechseln Sie nicht das Windows-Benutzerkonto, während CyberLink PowerDVD for TOSHIBA ausgeführt wird.
Verwenden von CyberLink PowerDVD for TOSHIBA Hinweise zur Verwendung von CyberLink PowerDVD for TOSHIBA Bildschirmanzeigen und verfügbare Funktionen können je nach Video und Szene variieren. Öffnen des Handbuchs zu CyberLink PowerDVD for TOSHIBA Die Funktionen von CyberLink PowerDVD for TOSHIBA sowie Anleitungen sind in der CyberLink PowerDVD for TOSHIBA Hilfe beschrieben. Gehen Sie folgendermaßen vor, um die Hilfe zu CyberLink PowerDVD for TOSHIBA zu öffnen.
TOSHIBA Blu-ray Disc Player unterstützt die Kopierschutztechnologie AACS (Advanced Access Control System). Die Erneuerung des in dieses Produkt integrierten AACS-Schlüssels ist für den ununterbrochenen Genuss von Blu-ray Discs erforderlich™. Für diese Erneuerung wird eine Internetverbindung benötigt. Die Erneuerung des AACS-Schlüssels ist ab Kauf dieses Produkts 5 Jahre lang kostenlos; danach gelten jedoch die vom Softwareanbieter TOSHIBA Corporation angegebenen Bedingungen.
Anzeigegeräte und Ton Wenn das Videobild nicht auf dem externen Monitor oder Fernsehgerät angezeigt wird, beenden Sie TOSHIBA Blu-ray Disc Player und ändern Sie die Bildschirmauflösung. Um die Bildschirmauflösung zu ändern, klicken Sie auf Systemsteuerung -> Darstellung und Anpassung -> Anzeige -> Auflösung anpassen (in der Gruppe Windows-System in Alle Apps). Aufgrund der Ausgabe- oder Wiedergabebedingungen können Videos jedoch auf einigen externen Monitoren oder Fernsehgeräten nicht ausgegeben werden.
Gehen Sie wie nachstehend beschrieben vor, um das Handbuch zu TOSHIBA Blu-ray Disc Player zu öffnen. Drücken Sie nach dem Starten von TOSHIBA Blu-ray Disc Player die Taste F1 und klicken Sie auf Hilfe. 3D-Wiedergabe auf einem externen 3D-Gerät Die 3D-Wiedergabe auf einem externen 3D-fähigen Gerät ist nur mit bestimmten Modellen möglich. Die 3D-Effekte können nur auf einem über HDMI angeschlossenen externen Gerät angezeigt werden. Auf dem internen Bildschirm ist dies nicht möglich.
Die 3D-Wiedergabefunktion kann NICHT verwendet werden, um 2DVideoinhalte von Blu-ray Disc oder AVCHD mithilfe der 2D-zu-3DKonvertierung in 3D anzuzeigen. Die 3D-Wiedergabefunktion des Players ist nur für den privaten Gebrauch gedacht. Beachten Sie, dass die öffentliche 3D-Vorführung von Inhalten von Drittanbietern für unbekannte Personen oder ein größeres Publikum durch geltende Urheberrechte untersagt sein kann.
Je nach Systemumgebung kann der Player automatisch in den 2DModus umschalten, wenn Sie einen der folgenden Vorgänge während der 3D-Wiedergabe ausführen. Außerdem kann es zu einer zeitlichen Verzögerung kommen, wenn die Umschaltung erfolgt. Öffnen von Fenstern oder Popups wie [Rechtsklick-Menü], [Einstellungsfenster], [Dateiauswahl] oder [Fehlermeldung]. Verwenden von Windows-Funktionen. Verwenden von anderen Anwendungen.
Diese Software kann MPEG2-, MP4- und WTV-Dateien abspielen. Ihre eigenen 2D-Videoinhalte, die Sie mit einem Camcorder aufgenommen haben, und andere Inhalte, die Sie selbst erstellt haben, können in 2D oder mithilfe der 2D-zu-3D-Konvertierung in 3D abgespielt werden. Für die Wiedergabe von 3D-Inhalten werden nur Side-by-Side- und Interleave-3D-Videoformate unterstützt. Es können nicht alle Dateien abgespielt werden.
Laden Sie den Akku bei einer Umgebungstemperatur zwischen 5 und 35 Grad Celsius auf. Andernfalls könnte sich die Akkuleistung sich verschlechtern und die Akkulebensdauer verkürzen oder die elektrolytische Flüssigkeit könnte auslaufen. Aufladen des Akkus Wenn die Leistung des Akkus nachlässt, blinkt die Anzeige DC IN/Akku gelb, wodurch angezeigt wird, dass die Akkuenergie nur noch für wenige Minuten ausreicht.
Die Anzeige DC IN/Akku zeigt u. U. ein rasches Absinken der Akkubetriebszeit an, wenn Sie den Akku unter folgenden Bedingungen laden: Der Akku war lange Zeit nicht in Gebrauch. Der Akku wurde vollständig entladen und lange im Computer gelassen. Gehen Sie in diesem Fall folgendermaßen vor: 1. 2. 3. Entladen Sie den Akku vollständig, indem Sie den Computer solange eingeschaltet lassen, bis er automatisch abschaltet.
Häufigkeit und Dauer der Verwendung der Festplatte und der externen Laufwerke (z. B. optisches Laufwerk) Anfängliche Ladung des Akkus Verwendung von Zusatzgeräten, wie z. B. eines USB-Geräts, die über den Akku mit Strom versorgt werden Aktivierung des Energiesparmodus, wodurch Sie Akkuenergie sparen, wenn Sie den Computer häufig ein- und ausschalten Ort der Speicherung von Programmen und Daten Durch Schließen des Bildschirms bei Nichtbenutzung der Tastatur lässt sich Strom sparen. Die Umgebungstemperatur.
LAN Der Computer unterstützt ggf. Ethernet-LANs (10 Megabits pro Sekunde, 10BASE-T), Fast Ethernet-LANs (100 Megabits pro Sekunde, 100BASETX) und Gigabit Ethernet-LANs (1000 Megabits pro Sekunde, 1000BASET). Nachfolgend wird beschrieben, wie Sie den Computer an ein LAN anschließen bzw. davon trennen. Bauen Sie keine Speichermodule ein oder aus, wenn die Funktion Wakeup on LAN aktiviert ist (gilt nur für Modelle mit Speichermodulabdeckung).
Schließen Sie den Netzadapter an, bevor Sie das LAN-Kabel anschließen. Der Netzadapter muss angeschlossen bleiben, während das LAN verwendet wird. Wenn Sie den Netzadapter abtrennen, während der Computer auf das LAN zugreift, kann das System abstürzen. Schließen Sie nur das LAN-Kabel, keine andere Kabel an die LANBuchse an. Andernfalls könnte es zu Fehlfunktionen kommen. Schließen Sie kein Strom abgebendes Gerät an das LAN-Kabel an, wenn es mit der LAN-Buchse verbunden ist.
Verwenden Sie nur von TOSHIBA zugelassene Speichermodule. Installieren oder entfernen Sie ein Speichermodul auf keinen Fall unter den folgenden Bedingungen. a. Der Computer ist eingeschaltet. b. Der Computer wurde im Energiesparmodus oder Ruhezustand ausgeschaltet. c. Die Funktion „Wakeup-on-LAN“ ist aktiviert. d. Die Funktion für die drahtlose Kommunikation ist eingeschaltet. e. Die Schlaf- und Ladefunktion ist aktiviert. Achten Sie darauf, keine Schrauben oder Fremdkörper in den Computer fallen zu lassen.
6. Fahren Sie mit dem Fingernagel oder einem flachen Gegenstand unter die Abdeckung und heben Sie sie ab. Abbildung 4-6 Speichermodulabdeckung entfernen 1 2 1. Schraube 7. 2. Speichermodulabdeckung Richten Sie die Kerbe am Speichermodul mit der am Sockel aus und setzen Sie das Modul vorsichtig in einem 30-Grad-Winkel in den Sockel, bevor Sie es nach unten drücken, bis die seitlichen Laschen einrasten. Abbildung 4-7 Speichermodul einsetzen 1 2 3 1. Nut 2. Sockel B 3.
Richten Sie die Kerben an den Seiten des Speichermoduls mit den Laschen des Anschlusses aus und setzen Sie das Modul fest in den Anschluss ein. Lässt sich das Speichermodul nicht problemlos einsetzen, drücken Sie die Laschen mit der Fingerspitze vorsichtig nach außen. Halten Sie das Speichermodul an den Seiten (mit den Einkerbungen) fest. 8. Setzen Sie die Speichermodulabdeckung ein und sichern Sie sie mit der Schraube. Achten Sie darauf, dass die Speichermodulabdeckung fest geschlossen ist.
6. 7. 8. Fahren Sie mit dem Fingernagel oder einem flachen Gegenstand unter die Abdeckung und heben Sie sie ab. Drücken Sie die Laschen weg vom Modul, um es zu lösen. Ein Federmechanismus drückt eine Seite des Moduls schräg nach oben. Fassen Sie das Modul an den Kanten und nehmen Sie es aus dem Computer. Nach längerer Verwendung des Computers werden die Speichermodule und die Schaltkreise neben den Speichermodulen sehr warm.
Achten Sie darauf, dass keine Fremdkörper in den Speichermediensteckplatz gelangen. Achten Sie darauf, dass keine Gegenstände aus Metall, wie z.B. Heft- oder Büroklammern, in das Innere des Computers oder der Tastatur gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der Computer beschädigt werden und ein Feuer ausbrechen könnte. Für die Verwendung einer miniSD/microSD-Karte wird ein Adapter benötigt. Nicht alle Speichermedien wurden getestet.
SD-Speicherkarten haben eine maximale Kapazität von 2 GB. SDHCSpeicherkarten haben eine maximale Kapazität von 32 GB. SDXCSpeicherkarten haben eine maximale Kapazität von 128 GB. Formatierung von Speichermedien Neue Speicherkarten sind entsprechend bestimmten Standards formatiert. Wenn Sie eine Speicherkarte neu formatieren möchten, verwenden Sie ein Gerät, dass diese Speicherkarte unterstützt. Formatieren einer Speicherkarte Speicherkarten werden nach bestimmten Standards formatiert verkauft.
Weitere Informationen zur Verwendung von Speicherkarten finden Sie in der Dokumentation, die Sie mit der Karte erhalten haben. Hinweise zur Schreibschutzfunktion Speicherkarten verfügen über eine Schreibschutzfunktion. SD-Karte (SD-Speicherkarte, SDHC-Speicherkarte und SDXCSpeicherkarte) Bringen Sie den Schreibschutzschalter in die gesicherte Position, wenn Sie die Aufzeichnung von Daten verhindern möchten. Einsetzen von Speichermedien Die folgenden Anleitungen gelten für alle unterstützten Medien.
Schalten Sie den Computer nicht aus und wechseln Sie nicht in den Energiesparmodus oder Ruhezustand, während Dateien kopiert werden. Andernfalls können Daten verloren gehen. Entfernen von Speichermedien Die folgenden Anleitungen gelten für alle unterstützten Medien. So entfernen Sie ein Speichermedium: 1. 2. 3. Klicken Sie in der Windows-Taskleiste auf das Symbol Hardware sicher entfernen und Medium auswerfen. Wählen Sie Speichermedium. Ziehen Sie das Medium vollständig heraus.
Einige Modell unterstützen die Ultra-Highdefinition-Anzeige (3840 x 2160 Pixel) auf kompatiblen externen Geräten über den HDMI-Ausgang. Um diese Funktion zu verwenden, benötigen Sie ein HDMI-Kabel (geeignet für 3840x2160 Pixel oder mehr). So schließen Sie ein HDMI-kompatibles Anzeigegerät an: Für den Anschluss eines Geräts an den HDMI-Ausgang benötigen Sie ein geeignetes HDMI-Kabel. 1. 2. 3. Stecken Sie ein Ende des HDMI-Kabels in den HDMI-Eingang des HDMI-Anzeigegeräts.
3. 4. 5. Um die internen Lautsprecher des Computers zu verwenden, wählen Sie Lautsprecher. Um den Fernseher oder den externen Monitor zu verwenden, den Sie an den Computer angeschlossen haben, wählen Sie ein anderes Wiedergabegerät. Klicken Sie auf die Schaltfläche Als Standard. Klicken Sie auf OK, um das Dialogfeld Sound zu schließen. Einstellungen für die Anzeige von Videos auf HDMI-Geräten Verwenden Sie die folgenden Einstellungen, um Video auf dem HDMIAnzeigegerät anzuzeigen.
So stellen Sie eine drahtlose Verbindung zu einem externen Anzeigegerät her: 1. 2. 3. Gehen Sie zu Einstellungen und klicken Sie auf Geräte -> Angeschlossene Geräte. Klicken Sie auf Gerät hinzufügen. Der Computer sucht nach dem Wireless Display-Gerät. Wenn das Wireless Display-Gerät gefunden wurde, befolgen Sie die Anweisungen auf dem Bildschirm, um die Verbindung herzustellen. Nach dem Herstellen der Verbindung wird der Name des Wireless DisplayGeräts unter Projektoren aufgeführt.
Abbildung 4-13 Sicherheitsschloss 2 1 1. Schlitz für ein Sicherheitsschloss 2. Sicherheitsschloss Optionales TOSHIBA-Zubehör Um den Computer noch leistungsfähiger und seine Bedienung noch bequemer zu machen, können Sie verschiedene Optionen und Zubehör hinzufügen.
3. Verschieben Sie auf der Registerkarte Pegel den Schieberegler Mikrofon, um die Aufnahmelautstärke zu erhöhen oder zu verringern. Stellen Sie ggf. den Schieberegler Mikrofonverstärkung auf einen höheren Wert. SmartAudio Ihr Computer enthält SmartAudio, ein leistungsstarkes Programm, mit dem Sie Ihre Audio-Software konfigurieren können.
Um dieses Utility aufzurufen, klicken Sie auf DTS Sound unter DTS, Inc in Alle Apps. Für dieses Produkt gelten US-Patente. Siehe http://patents.dts.com Hergestellt unter Lizenz von DTS Licensing Limited. Anzeigemodus Die Einstellungen für den Anzeigemodus werden im Dialogfeld Bildschirmauflösung festgelegt. Um das Dialogfeld Bildschirmauflösung zu öffnen, klicken Sie auf Systemsteuerung -> Darstellung und Anpassung -> Anzeige -> Anzeigeeinstellungen ändern (in der Gruppe Windows-System in Alle Apps).
Kapitel 5 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zur Verwendung finden Sie im Onlinehandbuch, in der Hilfe oder ggf. in der Datei README.TXT der einzelnen Utilitys.
CyberLink PowerDVD Diese Software zum Abspielen von DVD-Video for TOSHIBA ist im Lieferumfang enthalten. Um dieses Utility aufzurufen, klicken Sie auf CyberLink PowerDVD for TOSHIBA in der Gruppe TOSHIBA in Alle Apps. Informationen zur Verwendung von CyberLink PowerDVD for TOSHIBA finden Sie in der Hilfedatei. TOSHIBA Blu-ray Disc Player Diese Software dient zur Wiedergabe von Blu-ray Discs™. Die Steuerungen auf dem Bildschirm ähneln denen eines DVD-Players.
TOSHIBA Service Station Diese Anwendung ermöglicht, dass der Computer automatisch nach Updates für TOSHIBA-Software oder nach anderen wichtigen Informationen von TOSHIBA, die Ihr Computersystem und dessen Programme betreffen, sucht. Wenn diese Anwendung aktiviert ist, überträgt sie eine begrenzte Menge von Systeminformationen an unsere Server. Diese Informationen werden unter strikter Einhaltung der Regeln und Vorschriften sowie geltender Datenschutzbestimmungen behandelt.
TOSHIBA Audio Enhancement TOSHIBA Audio Enhancement verfügt über die Funktionen Audio Source Filtering, Earphone Audio Enhancement und Speaker Audio Enhancement. Um die Einstellungen zu ändern, klicken Sie auf Audio Enhancement in der Gruppe TOSHIBA in Alle Apps. Bluetooth® Link Bluetooth® Link ermöglicht Ihnen, die Tastatur und das Touchpad Ihres Computers als Bluetooth-Tastatur und -Maus zu verwenden.
TOSHIBA Maintenance Utility TOSHIBA Maintenance Utility wird zum Löschen der Festplatte bereitgestellt. Mit diesem Utility können Sie alle Daten und Partitionen löschen sowie alle Sektoren der Festplatte überschreiben. Falls eine externe Festplatte an den Computer angeschlossen ist, können Sie diese ebenfalls löschen. Wenn Sie die Daten auf der externen Festplatte nicht löschen möchten, trennen Sie sie vom Computer. So rufen Sie dieses Utility auf: 1. 2. 3.
Automatische BildMit dieser Funktion wird die Stromversorgung schirmabschaltung *1 des Computer-LCDs unterbrochen, wenn über einen festgelegten Zeitraum keine Tastatureingabe erfolgte. Sobald eine Taste gedrückt wird, wird die Stromversorgung wieder hergestellt. Diese können Sie in den Energieoptionen festlegen. Automatische FestMit dieser Funktion wird die Stromversorgung plattenabschaltung *1 des Festplattenlaufwerks unterbrochen, wenn über einen festgelegten Zeitraum nicht darauf zugegriffen wurde.
Automatischer Reicht der Akkuladezustand für den weiteren Ruhezustand bei Betrieb nicht mehr aus, wird der Computer Entladung des Akkus automatisch in den Ruhezustand *1 heruntergefahren. Diese können Sie in den Energieoptionen festlegen. Energiesparmodus Wenn Sie Ihre Arbeit unterbrechen müssen, können Sie diese Funktion verwenden, um den Computer auszuschalten, ohne die Software zu beenden.
Schutz vor Überhitzung *1 Zum Schutz vor Überhitzung verfügt der Prozessor über einen eingebauten Temperatursensor, der bei Bedarf einen Lüfter aktiviert oder die CPU-Taktfrequenz herabsetzt. Sie können festlegen, ob bei Bedarf zunächst der Lüfter eingeschaltet wird und dann, falls nötig, die Taktfrequenz verringert wird, oder ob bei Bedarf zunächst die Taktfrequenz verringert und dann, falls nötig, der Lüfter eingeschaltet wird. Diese Funktionen werden über die Energieoptionen gesteuert.
Nachdem Sie das Kennwort eingerichtet haben, wird ein Dialogfeld eingeblendet, in dem Sie die Möglichkeit haben, es auf einem anderen Speichermedium zu speichern. Wenn Sie das Kennwort einmal vergessen sollten, können Sie die Kennwortdatei auf einem anderen Computer öffnen. Bewahren Sie das Speichermedium an einem sicheren Ort auf. Wenn Sie Zeichenfolge für das Kennwort eingeben, tippen Sie es Buchstabe für Buchstabe über die Tastatur ein.
Wenn Sie das Festplatten-Benutzerkennwort speichern, fahren Sie den Computer herunter oder starten Sie ihn neu. Andernfalls werden die gespeicherten Daten möglicherweise nicht korrekt eingetragen. Weitere Informationen zum Herunterfahren oder Neustarten des Computers finden Sie unter Einschalten. Supervisorkennwort Wenn Sie ein Supervisorkennwort einrichten, sind einige Funktionen für Benutzer, die sich mit dem Benutzerkennwort anmelden, unter Umständen nur eingeschränkt nutzbar.
TOSHIBA System Settings TOSHIBA System Settings ist das Konfigurationstool von TOSHIBA, das über das Windows-Betriebssystem verfügbar ist. Um TOSHIBA System Settings aufzurufen, klicken Sie auf System Settings in der Gruppe TOSHIBA in Alle Apps. Das Fenster „TOSHIBA System Settings“ enthält mehrere Registerkarten, auf denen bestimmte Funktionen des Computers konfiguriert werden können. Das Fenster enthält auch drei Schaltflächen: OK, Abbrechen und Übernehmen.
Nachdem Sie die Einstellungen geändert haben, wird ggf. ein Dialogfeld angezeigt, das Sie darüber informiert, dass die Änderungen erst nach einem Neustart des Computers wirksam werden. Starten Sie den Computer sofort neu, um die Änderungen zu übernehmen. Aufladen über USB Der Computer kann den USB-Anschluss mit USB-Strom (DC 5 V) versorgen.
Wenn die Schlaf- und Ladefunktion aktiviert ist, entlädt sich der Akku des Computers im Ruhezustand oder wenn der Computer ausgeschaltet ist. Es wird empfohlen, den Netzadapter anzuschließen, wenn Sie die Schlaf- und Ladefunktion verwenden. Externe Geräte, die an die USB Bus Power (DC 5 V)-Funktion angeschlossen sind, sind unter Umständen immer im Betriebszustand.
Mit dieser Option können Sie die Schlaf- und Ladefunktion im Akkubetrieb aktivieren/deaktivieren. Außerdem wird die verbleibende Akkukapazität angezeigt. Verschieben Sie den Regler, um diese Funktion zu aktivieren oder zu deaktivieren. Aktiviert Aktiviert die Schlaf- und Ladefunktion im Akkubetrieb. Deaktiviert Aktiviert die Schlaf- und Ladefunktion nur dann, wenn der Netzadapter angeschlossen ist.
Wenn der „CDP-Lademodus bei System EIN“ oder die USB-Schlaf- und Ladefunktion aktiviert ist, funktioniert die USB-Reaktivierung möglicherweise nicht. Verwenden Sie in diesem Fall einen USB-Anschluss ohne USB-Schlaf- und Ladefunktion oder deaktivieren Sie sowohl den „CDP-Lademodus bei System EIN“ als auch die USB-Schlaf- und Ladefunktion.
außerhalb Ihres Landes oder Gebietes (zum Beispiel EU) übermittelt werden. In anderen Ländern gelten unter Umständen andere Datenschutzgesetze als in Ihrem Land oder Gebiet. Sie können TOSHIBA PC Health Monitor jederzeit deaktivieren, indem Sie die Software über Programm deinstallieren in der Systemsteuerung deinstallieren. Dabei werden alle gesammelten Informationen automatisch vom internen Speicherlaufwerk gelöscht.
Fehlerinformationen (Bluescreen, Anwendungsfehler) ), Gerätebetriebszeit sowie Anzahl der Aktivierungen oder Statusänderungen (das heißt: Anzahl der Betätigungen der Ein/Aus-Taste und von FN-Tastenkombinationen, Netzadapter, Akku (bei Modellen mit Akku), LCD, Lüfter (bei Modellen mit Lüfter), HDD/SSD, Lautstärke, drahtlose Kommunikationsfunktionen und USB), Nutzung der von TOSHIBA bereitgestellten Funktionen/ Anwendungen (das heißt: Einstellungen, Betrieb, Installationsstatus und Anzahl der Aufrufe), Datum
3. 4. Benutzerhandbuch Halten Sie die Taste F2 gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Folgen Sie den Anweisungen auf dem Bildschirm.
Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Sie sollten sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden. Vorgehen bei der Problemlösung Wenn Sie sich an die folgenden Richtlinien halten, ist es viel leichter, Probleme zu beheben.
Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert und alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen. Überprüfen Sie alle Kabel auf lose Drähte und alle Anschlüsse auf lose Anschlussstifte.
Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Wenn Sie ein Softwarepaket nicht laden können, sind möglicherweise die Medien oder das Programm beschädigt. Versuchen Sie in diesem Fall, ein anderes Exemplar der Software zu laden, falls möglich. Wenn eine Fehlermeldung angezeigt wird, während Sie ein Softwareprogramm benutzen, lesen Sie die mit der Software gelieferte Dokumentation.
So schließen Sie ein Programm, das nicht mehr reagiert: 1. 2. 3. Drücken Sie gleichzeitig Strg, Alt und Entf (einmal) und klicken Sie dann auf Task-Manager. Das Fenster des Windows Task-Managers wird angezeigt. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden. Das Schließen des fehlerhaften Programms ermöglicht es normalerweise, die Arbeit fortzusetzen. Andernfalls fahren Sie mit dem nächsten Schritt fort.
3. Folgen Sie den Anweisungen auf dem Bildschirm. Hardware- und System-Checkliste In diesem Abschnitt werden Probleme besprochen, die von der Hardware Ihres Computers oder angeschlossenen Peripheriegeräten verursacht werden.
Problem Vorgehensweise Netzadapter versorgt Überprüfen Sie die Anschlüsse, um den Computer nicht sicherzustellen, dass das Netzkabel/der mit Strom Netzadapter fest an den Computer und eine Strom führende Steckdose angeschlossen ist. Überprüfen Sie den Zustand des Kabels und der Anschlüsse. Ist das Kabel zerschlissen oder anderweitig beschädigt, ersetzen Sie es durch ein neues. Sind die Anschlüsse verschmutzt, reinigen Sie diese mit einem sauberen Baumwolltuch.
Echtzeituhr Problem Vorgehensweise Die BIOSEinstellung und Systemdatum/uhrzeit sind verloren gegangen Die Lebensdauer der Echtzeituhr (RTC) ist abgelaufen. Sie müssen das Datum und die Uhrzeit im TOSHIBA Setup Utility einstellen, indem Sie folgendermaßen vorgehen: 1. 2. 3. 4. Öffnen Sie das TOSHIBA Setup Utility. Weitere Informationen dazu finden Sie im Abschnitt TOSHIBA Setup Utility. Stellen Sie das Datum im Feld System Date ein. Stellen Sie die Uhrzeit im Feld System Time ein.
Problem Vorgehensweise Abdrücke auf dem Bildschirm Möglicherweise haben die Tastatur oder das Touchpad den Bildschirm berührt, während er geschlossen war. Versuchen Sie, die Abdrücke durch vorsichtiges Abwischen des Bildschirms mit einem sauberen trockenen Tuch zu entfernen. Verwenden Sie, falls dies nicht funktioniert, einen hochwertigen LCD-Bildschirmreiniger.
Problem Vorgehensweise Kein Zugriff auf CD/ DVD/Blu-ray™ DVD im Laufwerk Überprüfen Sie, ob die Laufwerklade sicher geschlossen ist. Schieben Sie sie vorsichtig nach hinten, bis sie einrastet. Öffnen Sie die Laufwerklade und prüfen Sie, ob die Disc richtig eingelegt wurde. Sie sollte ganz gerade und mit der beschrifteten Seite nach oben liegen. Ein Fremdkörper in der Laufwerklade könnte das Lesen der Disc verhindern. Überprüfen Sie die Lade auf Fremdkörper. Entfernen Sie den Fremdkörper.
Touchpad Problem Vorgehensweise Das Touchpad funktioniert nicht. Überprüfen Sie die Geräteeinstellungen. Klicken Sie auf Systemsteuerung -> Hardware und Sound -> Maus (in der Gruppe WindowsSystem in Alle Apps). Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung des bewegen Sie die Maus dann erneut. Zeigegeräts Doppeltippen (Touchpad) funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1.
USB-Maus Problem Vorgehensweise Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung der bewegen Sie die Maus dann erneut. Maus Entfernen Sie die Maus vom Computer und schließen Sie sie an einen freien USB-Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
Problem Vorgehensweise USB-Gerät funktioniert nicht Entfernen Sie das USB-Gerät vom Computer und schließen Sie es an einen freien Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass die USB-Gerätetreiber korrekt installiert sind. Sehen Sie dazu sowohl in der Gerätedokumentation als auch in der Betriebssystemdokumentation nach. Schlaf- und Ladefunktion Weitere Informationen finden Sie im Abschnitt USB-Schlaf- und Ladefunktion.
Problem Vorgehensweise Der Akku entlädt sich schnell, selbst wenn der Computer ausgeschaltet ist. Wenn die Schlaf- und Ladefunktion aktiviert ist, entlädt sich der Akku des Computers im Ruhezustand oder wenn der Computer ausgeschaltet ist. Schließen Sie den Netzadapter an den Computer an oder deaktivieren Sie die Schlaf- und Ladefunktion. An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht.
Problem Vorgehensweise Es wird kein Ton ausgegeben Drücken Sie die Funktionstasten zum Erhöhen oder Verringern der Lautstärke. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie, ob die Stummschaltung (Ton aus) aktiviert wurde Überprüfen Sie die Kopfhörerverbindung. Überprüfen Sie im Windows-Geräte-Manager, dass das Audiogerät aktiviert ist und ordnungsgemäß arbeitet.
Problem Vorgehensweise Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit der Funktionstaste das aktive Anzeigegerät, sodass nicht das interne verwendet wird. Überprüfen Sie, dass der externe Monitor angeschlossen ist.
Problem Vorgehensweise Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Vergewissern Sie sich, dass der Schnellstart deaktiviert ist: 1. 2. 3. 4. 5. Klicken Sie auf Systemsteuerung -> System und Sicherheit -> Energieoptionen (in der Gruppe Windows-System in Alle Apps).
Bluetooth Problem Vorgehensweise Kein Zugriff auf das Bluetooth-Gerät Vergewissern Sie sich, dass die Funktion für die drahtlose Kommunikation beim Computer eingeschaltet ist. Überprüfen Sie, ob der Bluetooth Manager auf dem Computer ausgeführt wird und ob das externe Bluetooth-Gerät eingeschaltet ist. Es darf kein optional erhältlicher Bluetooth-Adapter im Computer installiert sein. Die eingebaute Bluetooth-Hardware und ein anderer BluetoothController können nicht gleichzeitig verwendet werden.
Kapitel 7 Anhang Technische Daten In diesem Abschnitt sind die technischen Daten des Computers zusammengefasst. Abmessungen Die folgenden Maße und Gewichte berücksichtigen keine Teile, die über das Gehäuse des Computers hinausragen. Die physischen Abmessungen sind modellabhängig. Größe Ca. 380 mm x 259,9 mm x 22,5/22,5 mm (B x T x H) Ca. 380 mm x 259,9 mm x 23,5/23,5 mm (B x T x H) Ca. 380 mm x 259,9 mm x 24,5/24,5 mm (B x T x H) (überstehende Teile nicht eingeschlossen).
Stromversorgung Netzadapter 100-240 V Wechselstrom 50 oder 60 Hertz Computer 19V DC Netzkabel und Netzstecker Der Netzstromeingang des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird.
Für die USA und Kanada müssen Konfigurationen mit zwei Kontakten dem Typ 2-15P (250 V) oder 1-15P (125 V) und Konfigurationen mit drei Kontakten dem Typ 6-15P (250 V) oder 5-15P (125 V) entsprechen wie in U.S. National Electrical Code Handbook und Canadian Electrical Code Part II definiert. Die folgenden Abbildungen zeigen die Steckerformen für die USA und Kanada, Großbritannien, Australien, Europa und China.
Es konnten noch nicht alle drahtlosen Geräte, die die WLAN- oder Bluetooth-Technologie verwenden, bezüglich ihrer Anschluss- und Verwendungsfähigkeit getestet werden. Bluetooth- und Wireless LAN-Geräte arbeiten im selben Funkfrequenzbereich und können sich deshalb gegenseitig stören. Wenn Sie Bluetooth- und Wireless LAN-Geräte gleichzeitig verwenden, kann die Netzwerkleistung möglicherweise beeinträchtigt werden; unter Umständen wird die Netzwerkverbindung sogar getrennt.
WLAN-Technologie Die Funktion für die drahtlose Kommunikation des Computers unterstützt verschiedene drahtlose Kommunikationsgeräte. Einige Modelle verfügen über Wireless LAN- und Bluetooth-Funktionen. Verwenden Sie die Wireless LAN- (Wi-Fi) oder Bluetooth-Funktionen nicht in der Nähe von Mikrowellengeräten oder in Gebieten, die Funkstörungen oder magnetischen Feldern ausgesetzt sind. Störungen durch Mikrowellengeräte oder andere Quellen können den Wi-Fi- oder Bluetooth-Betrieb unterbrechen.
Medienzugriffsprotokoll CSMA/CA (Collision Avoidance) mit Acknowledgment (ACK) Funkmerkmale Die Funkeigenschaften von Wireless LAN-Modulen können in Abhängigkeit von den folgenden Punkten variieren: Land/Vertriebsgebiet, in dem das Produkt erworben wurde Produkttyp Die drahtlose Kommunikation unterliegt häufig den nationalen Vorschriften für den Funkverkehr.
Netzwerkumgebung, die schnell und einfach einzurichten und sicher und vertrauenswürdig ist. Die integrierten Bluetooth-Funktionen des Computers und ein externer Bluetooth-Adapter können nicht gleichzeitig verwendet werden. Die Bluetooth-Drahtlostechnologie verfügt über die folgenden Merkmale: Sicherheit Zwei moderne Sicherheitsmechanismen gewährleisten eine hohe Sicherheitsstufe: Die Authentifizierung verhindert den Zugriff auf kritische Daten und die Vertuschung der Herkunft einer Nachricht.
Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden. Für die öffentliche Verwendung ist eine allgemeine Autorisierung erforderlich. Luxemburg: Implementiert Allgemeine Autorisierung erforderlich für Netzwerk- und Dienstbereitstellung. Norwegen: Implementiert Dieser Teilabschnitt gilt nicht für das Gebiet in einem Umkreis von 20 km um das Zentrum von NyÅlesund.
Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2. Zur Verwendung für lokale Netzwerke zur Kommunikation von Bordbesatzungen im Bereich des Flughafens und während aller Flugphasen zugelassen. Zur Verwendung für öffentlich zugängliche lokale Netzwerke an Bord von Flugzeigen während des Flugs in Flughöhen über 3000 m zugelassen.
Um den europäischen Gesetzen zum Betrieb von Wireless LANs zu entsprechen, gelten die obigen Einschränkungen für die Verwendung der 2,4- und 5-GHz-Kanäle nur für den Betrieb im Freien. Überprüfen Sie bitte mithilfe der Wireless LAN Utility, welcher Kanale jeweils für den Betrieb verwendet wird.
Die abgegebene Strahlung des drahtlosen Geräts liegt weit unter den entsprechenden Grenzwerten der FCC. Trotzdem sollte das drahtlose Gerät so verwendet werden, dass beim normalen Betrieb das Risiko des Kontakts mit der Strahlung minimiert wird. Bei normaler Betriebskonfiguration sollte der Abstand zwischen der Antenne und dem Benutzer mindestens 20 cm betragen. Die genaue Position der Antenne können Sie dem Benutzerhandbuch entnehmen.
1. Wichtiger Hinweis Dieses Gerät kann in derselben Frequenzbandbreite arbeiten wie industrielle, wissenschaftliche oder medizinische Geräte, Mikrowellengeräte, lizenzierte Funkstationen und nicht lizenzierte Niedrigenergiefunkstationen zur mobilen Objekterkennung (RFID), die in Fertigungsanlagen verwendet werden ( = Sonstige Funkstationen). 1. 2. 3. Vergewissern Sie sich vor der Verwendung dieses Geräts, dass es keine Störungen der oben genannten Einrichtungen verursacht.
4. : Dieses Gerät verwendet eine Frequenzbandbreite von 2.400 MHz bis 2.483,5 MHz. Es ist nicht möglich, das Frequenzband von mobilen Objektidentifikationssystemen zu vermeiden. 4. Informationen zur JEITA 5 GHz Wireless LAN unterstützt den Kanal W52/W53/W56. Geräteautorisierung Dieses Gerät trägt die Technical Regulation Conformity Certification und gehört zur Geräteklasse von Funkeinrichtungen von NiedrigenergieDatenkommunikationssystemen gemäß den entsprechenden japanischen Gesetzen.
Es gelten folgende Einschränkungen: Das Gerät darf nicht auseinander gebaut oder verändert werden. Installieren Sie das Drahtlosmodul nicht in ein anderes Gerät. Funkzulassungen für drahtlose Geräte Dieses Gerät ist gemäß den Funkstandards der in der folgenden Tabelle aufgeführten Länder/Gebiete zugelassen. Wenn Sie dieses Gerät in Ländern/Regionen verwenden, die in der folgenden Tabelle nicht aufgeführt sind, wenden Sie sich an den TOSHIBA-Support.
Interferenzen in einer Wohnumgebung gewährleisten. Dieses Gerät erzeugt und verwendet hochfrequente Energie, kann diese abstrahlen und den Funkverkehr stören, wenn es nicht entsprechend den Anleitungen installiert und verwendet wird. Es gibt jedoch keine Garantie, dass in einer bestimmten Installation keine Interferenzen verursacht werden. Ob dieses Gerät den Rundfunk- oder Fernsehempfang tatsächlich stört, kann durch Aus- und Einschalten festgestellt werden.
bei Verwendung des Computers in Gebieten mit niedrigem Luftdruck (zum Beispiel über 1000 m über NN) bei Verwendung des Computers unter Temperaturbedingungen außerhalb des Bereichs zwischen 5° C und 30° C bzw. über 25° C in großen Höhen. (Alle Werte sind ungefähr und variieren je nach Computermodell, genauere Angaben erhalten Sie bei Bedarf vom TOSHIBA-Support.) Auch Änderungen der Gerätekonfiguration können dazu führen, dass die CPU-Leistung von den Spezifikationen abweicht.
Verfügung steht. Auch wenn bestimmte Tools möglicherweise den tatsächlichen, physischen Speicher anzeigen, stehen dem Betriebssystem trotzdem nur ca. 3 GB Speicher zur Verfügung. Computer mit einem 64-Bit-Betriebssystem können 4 GB oder mehr Systemspeicher ansprechen.
Der gesamte verfügbare Grafikspeicher ist die Summe des dedizierten Grafikspeichers, des Systemgrafikspeichers und des gemeinsam genutzten Systemspeichers. Der gemeinsam genutzte Systemspeicher variiert in Abhängigkeit von der Größe des Systemspeichers und anderen Faktoren. WLAN Die Übertragungsgeschwindigkeit und die Reichweite des Wireless LAN können variieren.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text: """ Portions of this software are copyright (C) The FreeType Project www.freetype.org All rights reserved. """ Please replace with the value from the FreeType version you actually use. Legal Terms ============ 0.
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions: Redistribution of source code must retain this license file (`FTL.
freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.
Stichwortverzeichnis A E Akku Echtzeituhr 4-21 Energiesparmodus 5-6 Kapazität überwachen 4-23 Energiesparmodus automatisch 5-6 einstellen 2-10 Externer Monitor Probleme 6-14 Anzeigemodus 4-40 Arbeitsspeicher entfernen 4-29 installieren 4-27 F Festplatte automatische Abschaltung 5-6 ASCII-Zeichen 4-6 Audiosystem Probleme 6-13 B G Grafikchip 3-12 Bildschirm Anzeige 3-8 automatische Abschaltung 5-6 öffnen 2-5 Scharniere 3-9 H HDMI-Ausgang 3-5 K Kennwort beim Einschalten 5-6 Benutzer 5-8 Starten des C
Lüftungsschlitze 3-5, 3-6 M R Reinigen des Computers 1-14 MultiMediaCard entfernen 4-34 S SD/SDHC/SDXC-Karte formatieren 4-32 Hinweis 4-31 N Netzadapter 19-V-Gleichstromeingang (DC IN) 3-2 anschließen 2-3 zusätzlicher 4-38 Sicherheitsschloss 4-37 Speicherkarte einsetzen 4-33 entfernen 4-34 Neustarten des Computers 2-10 Speichermediensteckplatz 4-30 P Probleme Abschaltung bei Überhitzung 6-5 Akku 6-6 Analyse des Problems 6-2 Audiosystem 6-13 duales Zeigegerät 6-9 Echtzeituhr 6-7 externer Monitor 6-1
U Umgang mit Datenträgern Speicherkarte 4-32 Umgang mit Karten 4-32 USB-Gerät Probleme 6-11 V Video-RAM 3-11 W Webcam 3-8 Wiederherstellungsmedien 2-16 Z Zeigegerät Touchpad 3-10 Benutzerhandbuch Stichwortverzeichnis-3