User’s Manual L100
Copyright © 2005 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. L100 Portable Personal Computer User’s Manual First edition February 2006 Ownership and copyright of music, video, computer programs, databases, etc. are protected by the copyright laws.
Trademarks Intel, Centrino, Intel Core and Celeron are trademarks or registered trademarks of Intel Corporation. Windows® and Microsoft are registered trademarks of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak. TruSurround XT, WOW XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies are incorporated under license from SRS Labs, Inc. Other trademarks and registered trademarks not listed above may be used in this manual.
Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.
Panasonic DVD Super Multi UJ-850B ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
TEAC DVD Super Multi DV-W28EB ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
Hitachi-LG Data Storage, Inc. DVD Super Multi GMA-4082N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Pioneer DVD Super Multi DVR-K16 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
NEC DVD Super Multi ND-7550A ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD-ROM and CD-R/RW TS-L462C ■ The DVD-ROM and CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Panasonic DVD-ROM and CD-R/RW UJDA770 ■ The DVD-ROM and CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
xiv User’s Manual
Table of Contents Preface General Precautions Chapter 1 Introduction Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Options . . .
Table of Contents Chapter 4 Operating Basics Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 Using the optical media drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 Audio/Video controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6 Writing CDs on a DVD-ROM and CD-R/RW drive . . . . . . . . . . . . . . . .4-7 Writing CD/DVDs on a DVD Super Multi drive supporting DVD±R Double layer. . . . . . . .
Table of Contents Chapter 8 Optional Devices PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Additional AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 USB floppy disk drive . . . . . . . . . . . . . . . . .
Table of Contents xviii User’s Manual
Preface Congratulations on your purchase of the TOSHIBA L100 Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your TOSHIBA L100 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Preface Chapter 6, Power and Power-Up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup explains how to configure the computer using the HW Setup program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly.
Preface Display ABC Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
Preface xxii User’s Manual
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Please also refer to the Instruction Manual for Safety and Comfort. Stress injury Carefully read the Instruction Manual for Safety and Comfort.
PC Card overheating Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time. Mobile phones Use of mobile phones can interfere with the audio system. Computer operation is not impaired but is recommended that a distance of 30cm be maintained between the computer and a mobile phone in use.
CE compliance This product and the original options are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards.
Information on the secure writing of optical media Even if your software gives no indication that any problems have occurred, you should always check to ensure that information has been successfully stored on recordable optical media (CD-R, CD-RW and so forth). Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy.
Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
WARNING Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Turn OFF the Wireless Communication switch inside a medical facility or near medical electric equipment. Do not bring medical electric equipment close to the product.
Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction Software Windows® XP Home Edition or Professional The following software is preinstalled: ■ Microsoft® Windows® XP Home Edition or Professional ■ Modem driver ■ Display driver for Windows® ■ TOSHIBA Utilities ■ Wireless LAN driver (can be used only on Wireless LAN models) ■ Sound driver for Windows® ■ DVD Video Player ■ LAN driver ■ Pointing device driver ■ TOSHIBA User’s Manual ■ TOSHIBA Assist ■ TOSHIBA ConfigFree ■ TOSHIBA Touch and Launch ■ TOSHIBA Power Saver Utility ■ TOSHIBA Touch Pad O
Introduction Features Processor Built-in Depending on the model you purchased: Intel® Celeron® M Processor 410 or higher. Intel® Core™ Solo Processor T1300 or higher. Intel® Core™ Duo Processor T2300 or higher.
Introduction Power Battery Pack Your computer is powered by a rechargeable lithium-ion battery pack (4000 or 2000 mAh). RTC Battery The internal RTC battery backs up the Real Time Clock and calendar. AC Adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord. Because it is universal, it can receive a range of AC voltage from 100 to 240 volts; however, the output current varies among different models.
Introduction User’s Manual DVD-ROM and CD-R/RW drive Some models are equipped with a full-size, DVD-ROM and CD-R/RW drive module that lets you run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-Rs at up to 24 speed and CD-RWs at up to 24 speed.
Introduction Display The computer’s LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability. Built-In 15.0" TFT screen, 16 M colors, with the following resolution: 1024 horizontal × 768 vertical pixels Graphics Controller Graphics controller maximizes display performance. Refer to Appendix B, Display Controller and Modes for more information.
Introduction Multimedia Sound System A Windows® Sound System compatible sound system provides internal speakers as well as jacks for an external microphone and headphones. Video-Out Jack (S-Video) The video out jack lets you transfer video data to external devices. Data output depends on the type of device connected to the S-Video cable. (Not all models support this feature.) Audio/Video Control Buttons Use these buttons to control the computer’s CD audio or DVD video player and Windows® Media player.
Introduction Wireless LAN The Wireless LAN feature is not available on all models. Where present, it supports the B and G standard but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum / Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.
Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Please note that the descriptions for starting some special features are based on setting the Control Panel to Category View. On Classic view the description is different. User’s Manual Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
Introduction 1-10 System Automatic Standby/Hibernation This feature automatically shuts down the system in Standby Mode or Hibernation Mode when there is no input or hardware access for a time specified. To specify the time, click start, Control Panel, Performance and Maintenance, TOSHIBA Power Saver. At Basic Setup tab, you can specify the time for System standby or System hibernation.
Introduction Heat dispersal To protect from overheating, the CPU has an internal temperature sensor. If the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered. Use the Fan item of the Basic Setup tab in TOSHIBA Power Saver. ■ Maximum Performance Turns on fan first, then if necessary lowers CPU processing speed. ■ Performance Uses a combination of fan and lowering the CPU processing speed.
Introduction 1-12 HW Setup This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use. To start the utility, double click the TOSHIBA Assist on your desktop, select the OPTIMIZE tab , and click TOSHIBA HW Setup. DVD Video Player The DVD Video Player is used to play DVD Video. It has an on-screen interface and functions. Click start, point to All Programs, point to InterVideo WinDVD, then click InterVideo WinDVD.
Introduction User’s Manual TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. To run ConfigFree, click start, select All Programs followed by TOSHIBA followed by Networking and then click ConfigFree.
Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. Refer to Chapter 8 Optional Devices, for details. The following options are available: Memory expansion Two memory modules can be installed in your computer. Use only DDRII-533MHz compatible memory modules. See your TOSHIBA dealer for details. 1-14 Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement.
Introduction User’s Manual 1-15
Introduction 1-16 User’s Manual
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer’s front with its display panel in the closed position.
The Grand Tour Left side The following figure shows the computer’s left side. External Monitor Port Cooling Vents USB Ports Video-Out Jack Wireless Communication Switch Modem Jack Microphone Jack PC Card Slot Headphone Jack The left side of the computer External Monitor Port This 15-pin port lets you connect an external video display. Analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus (USB 2.0) ports A pair of Universal Serial Bus ports is on the left side.
The Grand Tour Do not block the cooling vents. Also ensure that foreign objects are kept out of the vents such as pins or similar objects, which can damage the computer’s circuitry. Video-Out Jack Plug an S-Video cable into this jack for video-out. The S-Video cable carries video signals. (Depends on the model you purchased.) Modem Jack The modem jack lets you use a modular cable to connect the modem directly to a telephone line.
The Grand Tour Eject Button Press this to open the ODD tray. Emergency Eject Hole In the event that the disc drive becomes inexplicably locked or stops responding, insert a slender object such as a straightened paper clip into the eject hole to force a manual ejection of the ODD tray. Universal Serial Bus (USB 2.0) ports A pair of Universal Serial Bus ports is on the right side. The ports comply with the USB 2.0 standard, which enables data transfer speeds 40 times faster than the USB 1.
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Pack Battery Release Latch Battery Lock Cooling Vents Wireless LAN Cover Memory Module Cover HDD Cover The underside of the computer User’s Manual Battery Pack The battery pack powers the computer when the AC adaptor is not connected. For detailed information on the battery pack, refer to Chapter 6, Power and Power-Up Modes.
The Grand Tour Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.
The Grand Tour Touch Pad Control Buttons These buttons let you select menu items or manipulate text and graphics designated by the on-screen pointer. Refer to the Using the Touch Pad section in Chapter 4, Operating Basics. Touch Pad A Touch Pad located in the center of the palm rest is used to control the on-screen pointer. System & Keyboard Indicators LEDs let you monitor the status of various computer functions (Power, Battery charge, HDD activity and Wireless activity).
The Grand Tour Battery The Battery indicator shows the condition of the battery’s charge: Green indicates full charge, orange indicates the battery charging and flashing orange indicates a low battery charge. Refer to Chapter 6, Power and Power-Up Modes. Wireless Activity Shows you Wireless LAN activity, and whether Wireless LAN is turned on or not. Built-in HDD/ODD The Built-in HDD/ODD indicator glows green when the computer accesses the hard disk drive or optical disk drive.
The Grand Tour CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi speed CD-RW discs or high-speed 4- to 10-speed discs. The write speed of the ultra-speed CD-RW discs (Ultra-speed is available on the DVD-ROM & CD-R/RW drive only) is a maximum of 24-speed. DVDs ■ DVD-R and DVD-R DL discs can be written only once. The recorded data cannot be erased or changed.
The Grand Tour DVD Super Multi drive (Supporting DVD±R Double Layer) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
The Grand Tour ■ Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adaptor or other types of AC Adaptors may have a different voltage which could cause damage to your computer, computer failure and/or possible data loss.
The Grand Tour 2-12 User’s Manual
Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read the Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability.
Getting Started Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. Proper ambient conditions should also be maintained for the computer’s operation.
Getting Started Placement of the computer Position the computer and peripheral devices to provide comfort and safety. ■ Set the computer on a flat surface at a comfortable height and distance. ■ The display should be no higher than eye level to avoid eyestrain. ■ Place the computer so that it is directly in front of you when you work and make sure you have adequate space to easily operate other devices. ■ Allow adequate space behind the computer to let you freely adjust the display.
Getting Started Lighting Proper lighting can improve legibility of the display and reduce eyestrain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted Windows, shades or other screen to eliminate sun glare. ■ Avoid placing the computer in front of bright light that could shine directly in your eyes. ■ If possible, use soft, indirect lighting in your computer work area.
Getting Started Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.
Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.
Getting Started 2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the back of the computer. Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Getting Started Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Windows XP setup. Press and hold the computer’s power button for two or three seconds. Turning on the power Windows XP setup When you first turn on the power, the computer’s initial screen is the Microsoft® Windows® XP Home Edition or Professional Startup Screen Logo.
Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen. 1. If you have entered data, save it to the hard disk or to a floppy disk drive. 2. Make sure all disk (disc) activity has stopped, then remove the CD/ DVDs or floppy disk drive.
Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in Hibernation Mode, the hibernation feature must be enabled in two places in Power Options: Hibernate tab and TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will shut down in Standby Mode.
Getting Started Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Disk indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
Getting Started Entering Standby Mode You can enter Standby Mode in one of three ways: 1. Click Start, click Turn Off Computer and click Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility. When you turn the power back on, you can continue where you left when you shut down the computer.
Getting Started Restoring the preinstalled software If preinstalled files are damaged, use the Product Recovery DVD-ROM to restore them. Restoring the complete system To restore the operating system and all preinstalled software, follow the steps below. When you reinstall the Windows® operating system, the hard disk will be reformatted and all data will be lost. 1. Load the Product Recovery DVD-ROM in the optical media drive and turn off the computer’s power. 2.
Getting Started 3-14 User’s Manual
Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch Pad, optical media drives, audio/ video controls, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics For some functions, you can tap the Touch Pad instead of pressing a control button. Click: Tap the Touch Pad once Double-click: Tap the Touch Pad twice Drag and drop: 1. Hold down the left control button and move the cursor to drag the item you want to move. 2. Lift your finger to drop the item where you want it. Scroll: Vertical: Move your finger up or down the right edge of the Touch Pad. Horizontal: Move your finger left or right along the bottom edge of the Touch Pad.
Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. Eject Button Pressing the eject button b. Pressing the eject button will not open the drawer when the disc drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Place the disc, label side up, in the drawer. Inserting a disc When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above. ■ Do not touch the laser lens. Doing so could cause misalignment.
Operating Basics 4. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close it. Press gently until it locks into place. If the CD/DVD is not seated properly when the drawer is closed, the disc might be damaged. Also, the drawer might not open fully when you press the eject button.
Operating Basics 2. The disc extends slightly over the sides of the drawer so you can hold it. Hold the disc gently and lift it out. Removing a CD/DVD 3. Push the center of the drawer to close it. Press gently until it locks into place. Audio/Video controls This section describes how to use the audio/video control buttons. You can use them to play CDs and DVDs when the computer is on. Next and Previous buttons Press on the button to select the desired function.
Operating Basics Play/Pause and Stop buttons Press the respective button to select the desired function. Play/Pause Press the Stop Press the button to begin or pause playing. button to stop playing. Audio/Video Control buttons Writing CDs on a DVD-ROM and CD-R/RW drive Depending on the type of drive installed, you may be able to write CDs. The DVD-ROM and CD-R/RW drive lets you read DVD-ROMs and CDs as well as write CD-Rs/RWs.
Operating Basics Before writing or rewriting Please observe the following points when you write or rewrite the data. ■ We recommend the following manufacturers of CD-R and CD-RW media. Media quality can affect write or rewrite success rates. CD-R: CD-RW: TAIYO YUDEN Co., Ltd. MITSUI Chemicals, Inc. MITSUBISHI Chemical Corporation Ricoh Co., Ltd. Hitachi Maxell Ltd. MITSUBISHI Chemical Corporation Ricoh Co., Ltd.
Operating Basics When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. ■ Always copy data from the hard disk drive to the CD. Do not use cut-and-paste as the original data will be lost if there is a write error. ■ Do not perform any of the following actions: ■ Change users in the Windows® XP operating system. ■ Operate the computer for any other function, including use of a mouse or Touch Pad, closing/opening the LCD panel.
Operating Basics Writing CD/DVDs on a DVD Super Multi drive supporting DVD±R Double layer Some models in this series are equipped with a DVD Super Multi drive (Supporting DVD±R Double Layer). You can use the DVD Super Multi drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: RecordNow!, and DLA licensed by Sonic Solutions. InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo, Inc.
Operating Basics Before writing or rewriting ■ Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYO YUDEN Co., Ltd. MITSUBISHI Chemical Corporation Ricoh Co., Ltd. Hitachi Maxell Ltd. CD-RW: MITSUBISHI Chemical Corporation Ricoh Co., Ltd.
Operating Basics ■ There are two types of DVD-R discs: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. ■ We can support only Format1 of DVD-R DL. Therefore you cannot do the additional writing. If your data is under 4.7GB, we suggest to use DVD-R (SL) media. ■ You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge.You can not use a disc with a 2.6GB single-sided capacity.
Operating Basics When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/RW, DVD-R/RW/RAM or DVD+R/RW disc. ■ Do not perform any of the following actions when writing or rewriting: ■ ■ ■ ■ ■ ■ Change users in the Windows® XP operating system. ■ Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. ■ Start a communication application such as a modem. ■ Apply impact or vibration to the computer.
Operating Basics ■ You might not be able to use the “Exact Copy” function of RecordNow! to back up a DVD-R/RW or DVD+R/+RW disc that was made with other software on a different DVD-R/RW or DVD+R/+RW recorder. ■ If you add data to a DVD-R and DVD+R disc that you have already recorded to, you might not be able to read the added data under some circumstances. It cannot be read in 16-bit operating systems, such as Windows® 98SE and Windows® ME.
Operating Basics ■ Do not use any discs that have been formatted with packet writing software other than DLA. Similarly, do not use any discs that have been formatted with DLA with any packet writing software other than DLA. When using a disc you are not familiar with, format it by selecting “Full Format” before using it. ■ Do not use the Cut & Paste function for files and folders. A file or folder that has been cut may be lost if writing fails due to an error on the disc.
Operating Basics 2. Before recording the video to DVD ■ When you record to DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD. ■ Do not perform any of the following actions: ■ Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. ■ Bump or cause vibration to the computer.
Operating Basics Media care This section provides tips on protecting data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1. Store your CD/DVDs in the container they came in to protect them and keep them clean. 2. Do not bend the CD/DVD. 3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD/DVD that contains data. 4.
Operating Basics Sound System This section describes audio controls including sound levels and power management. Volume control The Volume Control utility lets you control the audio volume in Windows® for both playback and recording. ■ To launch Volume Control for playback, click start, point to All Programs, point to Accessories, point to Entertainment and click Volume Control. ■ To launch Recording Control, click Options, point to Properties, choose Recording and click OK.
Operating Basics Region selection Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used. To select a region, follow the steps below. 1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Operating Basics Open dialog box, if the modem and Telephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and telephony location are incorrect. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed. Select the COM port for your modem to use. Dialing Properties Select this item to display the dialing properties.
Operating Basics If you use a storage device such as an optical drive or hard disk drive connected to a 16-bit PC Card, you might experience the following modem problems: ■ Modem speed is slow or communication is interrupted. ■ Skips may occur in sound. Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. In the same way, pull the cable’s other connector out of the computer.
Operating Basics Wireless communication switch You can enable or disable the Wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch to the left (toward the back of the computer) turn it off and to the right (toward the front of the computer) to turn it on. Set the switch to off in airplanes and hospitals. Check the indicator. It will stop glowing when the wireless communication function is off.
Operating Basics LAN The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.
Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer.
Operating Basics Protruded portion User’s Manual 4-25
Operating Basics 4-26 User’s Manual
Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available.
The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. Refer to the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Press Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the Keypad overlay section in this chapter for more information on how to operate these keys. The power on default for both settings is off. Press Fn + F12 to lock the cursor on a specific line. The power on default is off. Hot keys Hot keys let you enable or disable certain features of the computers.
The Keyboard Hibernation: When you press Fn + F4, the computer enters Hibernation Mode. To avoid entering Hibernation Mode unexpectedly, a dialog box appears for verification. However, if you select the check box, it will not appear in the future. Display selection: Press Fn + F5 to change the active display device. When you press these hot keys, a dialog box appears. Only selectable devices will be displayed. Hold down Fn and press F5 again to change the device.
The Keyboard TouchPad: Pressing Fn + F9 in a Windows® environment enables or disables the Touch Pad. When you press these hot keys, the current setting will change and be displayed as an icon. Display resolution selection: Press Fn + spacebar to change the display resolution. Each time when you press these hot keys, the display resolution changes. TOSHIBA Zooming Utility (reduce): To reduce the icon size on the desktop or the application window, press the 1 key while holding down the Fn key.
The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows® : Windows® logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows® start menu. This key has the same function as the secondary mouse button. Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one.
The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2. Type upper-case characters by holding Fn + Shift and pressing a character key. 3. Release Fn to continue using the overlay. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
The Keyboard 5-8 User’s Manual
Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Table Power conditions Power on Universal AC adaptor not connected Battery charge is above low battery trigger point • Operates • LED: Battery off Battery charge is below low battery trigger point • Operates • LED: Battery flashes orange Battery charge is exhausted Computer shuts down No Battery installed • Cannot operates • LED: Battery off Power off (no operation) Power inclicators As shown in the above table, the Battery and Power indicators on the system indicator pan
Power and Power-Up Modes Power indicator Check the Power indicator to determine the power status: Green Indicates power is being supplied to the computer and the computer is turned on. Blinking orange Indicates power is being supplied to the computer while the computer is in Standby Mode. The indicator turns on for one second and off for two seconds. No light Under any other conditions, the indicator does not light.
Power and Power-Up Modes Battery pack To ensure that the battery pack maintains its maximum capacity, operate the computer on battery power at least once a month until the battery pack is fully discharged. Refer to Extending battery life in this chapter for procedures. If the computer is continuously operated on AC power through an AC adaptor for an extended period, more than a month, the battery may fail to retain a charge.
Power and Power-Up Modes If the following message is displayed on the LCD: ERROR 0271: Check date and time settings. WARNING 0251: System CMOS checksum bad-Default configuration used. Press [F1] to resume, [F2] to setup. The charge in the RTC battery is getting low or has been exhausted. You will need to set the date and time within the BIOS setup using the following steps: 1. Press F2 key - the BIOS setup screen will be displayed. 2. Set the date in System Date. 3. Set the time in System Time. 4.
Power and Power-Up Modes Danger 1. Never try to dispose of the battery pack by burning or expose it to a heating device such as a microwave oven. The battery pack could explode and cause bodily injury. 2. Never try to disassemble, repair or otherwise tamper with a battery pack. The battery pack will overheat and ignite. Leakage of caustic alkaline solution or other electrolytic substances will cause fire or injury, possibly resulting in death or serious injury. 3.
Power and Power-Up Modes 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack. Improper installation could generate smoke or fire, or cause the battery pack to rupture. 4. Keep the battery pack out of reach of infants and children. It can cause injury. Caution 1. Never continue to use a battery pack after its recharging capacity has become impaired, or after the display of a warning message indicating that the battery pack’s power is exhausted.
Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low, the Battery indicator flashes orange indicating that only a few minutes of battery power remain. If you continue to use the computer while the Battery indicator flashes, the computer enables Hibernation Mode (so you don’t lose data) and automatically turns off.
Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold. If the battery is extremely hot, it might not charge at all. To ensure the battery charges to its full capacity, charge the battery at room temperature of 10° to 30°C (50° to 88°F). ■ The battery is nearly completely discharged. Leave the AC adaptor connected for a few minutes and the battery should begin charging.
Power and Power-Up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in the TOSHIBA Power Saver to conserve battery power.
Power and Power-Up Modes Extending battery life To maximize the life of your battery pack: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below. 1. Turn off the computer’s power. 2. Disconnect the AC adaptor and turn on the computer’s power. If it does not turn on go to step 4. 3. Operate the computer on battery power for five minutes.
Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source.
Power and Power-Up Modes Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch. 1. 2. 3. 4.
Power and Power-Up Modes Power-up modes The computer has the following power-up modes: ■ Boot Mode: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation Mode: Data in memory is saved to the hard disk. ■ Standby Mode: Data is maintained in the computer’s main memory. Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started.
Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click Start, click Control Panel, click Printers and Other Hardware and select TOSHIBA HW Setup. HW Setup Window The HW Setup window contains the following tabs: General, Password, Display, Boot Priority, Keyboard, LAN and USB.
HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.
HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode. Enabled Enables the Wake-up on Keyboard. Disabled Disables the Wake-up on Keyboard (Default). USB USB KB/Mouse/FDD Legacy Emulation Use this option to enable or disable Legacy USB support.
HW Setup 7-4 User’s Manual
Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility.
Optional Devices PC card The computer is equipped with a PC Card slot that can accommodate one Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards. CardBus supports the new standard of 32-bit PC Cards. The bus provides superior performance for the greater demands of multimedia data transmission.
Optional Devices Removing a PC Card ■ Before removing a PC Card, make sure that any applications or system services do not use the card. ■ Be sure to disable the PC Card prior to removing it. Otherwise, the system may be fatally damaged. To remove the PC Card, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar and disable the PC Card. 2. Press the PC Card eject button to extend it. 3. Press the extended eject button to pop the card out slightly. 4.
Optional Devices Use a point size 1 Phillips screwdriver to remove and fasten the screws. Use of an incorrect screwdriver can damage the screw heads. Installing a memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-Up Modes). 4. Loosen the screws securing the memory module cover. 5.
Optional Devices 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Slot A Slot B Installing the memory module 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and PowerUp Modes. 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab.
Optional Devices 5. Grasp the module by the sides and pull it out. ■ If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Or you will get burnt if you touch any of them. ■ Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Latches Removing the memory module 6.
Optional Devices USB floppy disk drive The 3 1/2" external floppy disk drive module can be connected to the USB port. Disk-In-Use Indicator Floppy Disk Slot Eject Button USB floppy disk drive Disk-In-Use Indicator This indicator lights when the floppy disk is being accessed. Floppy Disk Slot Insert a floppy disk in this slot. Eject Button When a floppy disk is fully seated in the drive, the eject button pops out.
Optional Devices Using the USB floppy disk drive The USB floppy disk drive connects to any of the computer’s USB ports. It accommodates 1.44-megabyte or 720-kilobyte floppy disks. (You cannot format 720-kilobyte floppy disks on Windows® XP, but you can use previously formated disks.) Connecting 3 1/2" floppy disk drive To connect the drive, plug the floppy disk drive connector into a USB port. Refer to the following figure. Make sure the connector is right side up and properly aligned with the socket.
Optional Devices Disconnecting 3 1/2" floppy disk drive When you have finished using the floppy disk drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all floppy disk activity has stopped. If you disconnect the floppy disk drive or turn off the power while the computer is accessing the drive you may lose data or damage the floppy disk or the drive. 2. Click the Safely Remove Hardware icon on the Task Bar. 3. Click floppy disk drive. 4.
Optional Devices TV A TV output feature is provided with some models. You can connect a television set to the Video out jack on the computer. Follow the steps below. If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below. ■ Intel® Graphics Media Accelerator Driver for Mobile. ■ TV single 1. Click start and click Control Panel, then Appearance and Themes. 2. Double-click the Display icon to open the Display Properties window. 3.
Optional Devices ■ ATI RADEON XPRESS 200M Series 1. Open Control Panel, click Appearance and Themes. 2. Click Display. 3. Select Settings tab. 4. Click Advanced in Display Properties. 5. Select Displays tab in (Multiple Monitors) and ATI RADEON XPRESS 200M Series Properties. 6. With external monitor connected, click on the button beside Monitor, then select OK. ■ There are 10 Video standard types in the list. Select one of the Video Standard types according the region you are.
Optional Devices 8-12 User’s Manual
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists. Further action may result in data loss or damage.
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer and any other external device you are using. ■ Before you attach an external device, turn the computer off. When you turn the computer back on it recognizes the new device.
Troubleshooting Software Hardware The problems may be caused by your software or disk. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages. Next, check any error messages in the operating system documentation.
Troubleshooting Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program.
Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery Indicator indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn’t power the computer Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it.
Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor and replace the battery. Make sure it is securely seated. Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information, refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys produce numbers Check that the numeric keypad overlay is not selected. Press Fn + F11 and try typing again. Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. Refer to your software’s documentation.
Troubleshooting DVD-ROM and CD-R/RW drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a CD/DVD in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure The software or hardware configuration may be Some CD/DVDs run correctly, but others do causing a problem. Make sure the hardware configuration matches your software’s not needs.Check the CD/DVD’s documentation. Check the type of CD/DVD you are using.
Troubleshooting PC Card Refer also to Chapter 8, Optional Devices. Problem Procedure PC Card error occurs Reseat the PC Card to make sure it is firmly connected. Make sure the connection between the external device and the card is firm. Check the card’s documentation. If problems persist, contact your dealer. Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.
Troubleshooting Problem Procedure The response of the Touch Pad is too sensitive Adjust the touch sensitivity. 1. Open the Control Panel. 2. Click the Printers and Other Hardware icon. 3. Click the Mouse icon. 4. Click the Device Setting tab. 5. Click the Setting button. 6. The Properties for Synaptics Touch Pad window appears. Double-click Sensitivity in the Select an Item section on the left side of the screen. 7. PalmCheck and Touch Sensitivity are displayed. Click Touch Sensitivity. 8.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Printers and Other Hardware icon, and press Enter. 2. Select the Mouse icon and press Enter. 3. Click the Pointer Options tab. 4. Set the speed as instructed and click OK. The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning.
Troubleshooting Sound system Refer also to the documentation for your audio devices. Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor’s power switch is on.
Troubleshooting Problem Procedure After making a call you Make sure the tone or pulse selection in your can’t hear a ring communications application is set correctly. You can also use the ATD command. Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval.
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first. Before contacting TOSHIBA, try the following: ■ Review troubleshooting sections in the documentation for software and peripheral devices.
Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight 2.6kg - 2.8kg * * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Size 331 (w) x 278 (d) x 28.5/35.
Specifications Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication System Data: Fax: Full duplex Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) A-2 V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90 103/212A V.17/V.29/V.27ter/V.
Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular picture elements (pels) on or off. The controller is an advanced Video Graphics Array (VGA) that provides Extended Graphics Array (XGA) support for the internal LCD and external monitors. The following is available: ■ 15.
Display Controller and Modes Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates. Also, if your software supports both graphics and text modes, the screen display may appear to operate faster using a text mode.
Display Controller and Modes Table 1: Video modes (VGA) (continued) Video mode Type Resolution D VGA Grph 320 x 200 Pels 8x8 16 of 256K 16 of 256K 70 E VGA Grph 640 x 200 Pels 8x8 16 of 256K 16 of 256K 70 F VGA Grph 640 × 350 Pels 8 x 14 10 VGA Grph 640 × 350 Pels 8 x 14 16 of 256K 16 of 256K 70 11 VGA Grph 640 × 480 Pels 8 x 16 2 of 256K 2 of 256K 60 12 VGA Grph 640 × 480 Pels 8 x 16 16 of 256K 16 of 256K 60 13 VGA Grph 320 x 200 Pels 8x8 256 of 256K 256 of 256K
Display Controller and Modes Table 2: Video modes Resolution LCD colors CRT colors Vertical frequency (Hz) 800 x 600 256K/256K 256K/256K 60 75 85 100 1024 x 768 256K/256K 256K/256K 60 75 85 100 1280 x 1024 256K/256K (Virtual) 256K/256K 60 75 85 100 1600 x 1200 256K/256K (Virtual) 256K/256K 60 75 85 100 1920 x 1440 256K/256K (ATI: Virtual / Intel: Not supported) 256K/256K 60 75 2048 x 1536 256K/256K (ATI: Virtual / Intel: Not supported) 256K/256K 60 Some modes are not supported a
Display Controller and Modes Table 2: Video modes (continued) Resolution LCD colors CRT colors Vertical frequency (Hz) 800 x 600 64K/64K 64K/64K 60 75 85 100 1024 x 768 64K/64K 64K/64K 60 75 85 100 1280 x 1024 64K/64K (Virtual) 64K/64K 60 75 85 100 1600 x 1200 64K/64K (Virtual) 64K/64K 60 75 85 100 1920 x 1440 64K/64K (ATI: Virtual / Intel: Not supported) 64K/64K 60 75 2048 x 1536 64K/64K (ATI: Virtual / Intel: Not supported) 64K/64K 60 Some modes are not supported at LCD+CRT si
Display Controller and Modes Table 2: Video modes (continued) Resolution LCD colors CRT colors Vertical frequency (Hz) 800 x 600 16M/16M 16M/16M 60 75 85 100 1024 x 768 16M/16M 16M/16M 60 75 85 100 1280 x 1024 16M/16M (Virtual) 16M/16M 60 75 85 100 1600 x 1200 16M/16M (Virtual) 16M/16M 60 75 85 100 1920 x 1440 16M/16M (ATI: Virtual / Intel: Not supported) 16M/16M 60 75 2048 x 1536 16M/16M (ATI: Virtual / Intel: Not supported) 16M/16M 60 Some modes are not supported at LCD+CRT si
Display Controller and Modes Display Settings 1. You cannot move from the Settings tab of Display Properties to the multi-monitor when you are using the display of the computer and an external CRT display at the same time.
Display Controller and Modes ■ The way to move to multi-monitor (ATI RADEON XPRESS 200M) ■ Switch to Display Properties, like shown in previous page. ■ Click Advanced in Display Properties. ■ Select Displays tab in (Multiple Monitors) and ATI RADEON XPRESS 200M Series Properties. ■ With external monitor connected, click on the button beside Monitor, then select OK. Display Properties (Multiple Monitors) and ATI RADEON XPRESS 200M Series Properties 2.
Display Controller and Modes 5. When the LCD (internal liquid crystal display) display mode is selected, the Virtual (Virtual Screen) display mode can be set. However, afterwards, it may not possible to change the screen resolution to more than 1280 x 1024 pixels in Highest (32bit) mode (for example, when you attempt to set the resolution to 1600 x 1200 using the Screen resolution slide bar and then select Highest (32bit) mode from the Color quality drop-down menu).
Display Controller and Modes B-10 User’s Manual
Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII or PCI Express MiniCard Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance. Network Operating System ■ Microsoft® Windows® Networking Media Access Protocol ■ CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Data Rate ■ 54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11a/IEEE 802.11g) ■ 11/5.
Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
Wireless LAN Supported Frequency Sub-bands Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions. Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.
Wireless LAN 56 5280 60 5300 64 5320 100 5500 104 5520 108 5540 112 5560 116 5580 120 5600 124 5620 128 5640 132 5660 136 5680 140 5700 149 5745 153 5765 157 5785 161 5805 165 5825 When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point.
Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors Europe: Austria: OVE Italy: IMQ Belgium: CEBEC The Netherlands: KEMA Denmark: DEMKO Norway: NEMKO Finland: SETI Sweden: SEMKO France: UTE Switzerland: SEV Germany: VDE United Kingdom: BSI In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
Appendix E If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office. Make a note of your computer’s machine type, model number, and serial number, and put it in a safe place.
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite A50) Model number: (e.g. PSA50 YXT) Serial number: (e.g.
Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary LED: light emitting diode LSI: large scale integration MS-DOS: Microsoft® Disk Operating System OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output SXGA+: super extended graphics array plus TFT: thin-film transistor UART: universal asynchronous receiver/transmitter USB: Universal Seria
Glossary application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games. ASCII: American Standard Code for Information Interchange. ASCII code is a set of 256 binary codes that represent the most commonly used letters, numbers, and symbols. async: Short for asynchronous. asynchronous: Lacking regular time relationship.
Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory.
Glossary computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information. configuration: The specific components in your system (such as the terminal, printer, and disk drives) and the settings that define how your system works. You use the HW Setup program to control your system configuration.
Glossary disk storage: Storing data on magnetic disk. Data is arranged on concentric tracks much like a phonograph record. display: A CRT, LCD, or other image producing device used to view computer output. documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions. DOS: Disk Operating System. See operating system.
Glossary firmware: A set of instructions built into the hardware which controls and directs a microprocessor’s activities. floppy disk: A removable disk that stores magnetically encoded data. floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows® used to store documents or other folders. format: The process of readying a blank disk for its first use.
Glossary input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer. instruction: Statements or commands that specify how to perform a particular task. interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another.
Glossary LSI: Large Scale Integration. 1) A technology that allows the inclusion of up to 100,000 simple logic gates on a single chip. 2) An integrated circuit that uses large scale integration. M main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displays a list of options on the screen. Also called a screen.
Glossary online state: A functional state of a peripheral device when it is ready to receive or transmit data. operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices. output: The results of a computer operation. Output commonly indicates data.
Glossary R Radio frequency interference (RFI) shield: A metal shield enclosing the printed circuit boards of the printer or computer to prevent radio and TV interference. All computer equipment generates radio frequency signals. The FCC regulates the amount of signals a computing device can allow past its shielding. A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use.
Glossary synchronous: Having a constant time interval between successive bits, characters or events. system disk: A disk that has been formatted with an operating system. For MS-DOS the operating system is contained in two hidden files and the COMMAND.COM file. You can boot a computer using a system disk. Also called an operating system disk. T terminal: A typewriter-like keyboard and CRT display screen connected to the computer for data input/output.
Index A AC adaptor, 1-4 additional, 1-14 connecting, 3-6 ASCII characters, 5-7 B Battery charging, 6-8 extending battery life, 6-11 indicator, 6-1 location, 2-5 Monitoring capacity, 6-9 real time clock, 1-4, 6-4 safety precautions, 6-5 save mode, 1-10 types, 6-3 Battery pack, 1-4 additional, 8-6 replacing, 6-12 C CD-RW/DVD-ROM drive, 1-5 using, 4-2 writing, 4-7 Cleaning the computer, 4-24 D Display, 1-6 automatic power off, 1-9 brightness decreases, 5-4 brightness increases, 5-4 controller, 1-6 opening,
Index H Hard disk drive, 1-4 automatic power off, 1-9 Hibernation, 1-11, 5-4 HW Setup, 1-12 K Keyboard, 1-6, 5-1 emulating keys on enhanced, 5-2 F1 ...
Index R Restarting the computer, 3-12 S Security lock attaching, 8-11 Soft keys emulating keys on enhanced keyboard, 5-2 ScrLock, 5-3 Sonic RecordNow!, 1-12, 4-13 Sound System, 1-7, 4-18 headphone jack, 1-7 microphone jack, 1-7 mute hot keys, 5-3 Standby, 1-11 setting, 3-11 System automatic, 1-10 T TOSHIBA ConfigFree, 1-13 TOSHIBA PC DiagnosticTool, 1-12 TOSHIBA Theft Registration, E-2 TOSHIBA Utilities, 1-8 TOSHIBA Zooming Utility, 1-12 Touch Pad, 1-6 location, 2-6 using, 4-1 TV, 8-10 U USB, 1-6 V Vid
Index Index-4 User’s Manual