Gebruikershandleiding C870/C870D/L870/L870D/L875/ L875D
C870/C870D/L870/L870D/L875/L875D Inhoudsopgave Voorwoord Algemene voorzorgsmaatregelen Hoofdstuk 1 Aan de slag Controlelijst van apparatuur ................................................................. 1-1 Aan de slag ............................................................................................ 1-2 Hoofdstuk 2 Rondleiding Voorkant met gesloten beeldscherm .................................................. 2-1 Linkerkant .................................................................
C870/C870D/L870/L870D/L875/L875D Omgaan met de computer .................................................................. 3-46 Warmteverspreiding ............................................................................ 3-47 Hoofdstuk 4 Hulpprogramma's en geavanceerd gebruik Hulpprogramma's en toepassingen .................................................... 4-1 Speciale voorzieningen ........................................................................
C870/C870D/L870/L870D/L875/L875D Copyright ©2012 by TOSHIBA Corporation. Alle rechten voorbehouden. Krachtens de auteurswetten mag deze handleiding op geen enkele wijze worden verveelvoudigd zonder voorafgaande schriftelijke toestemming van TOSHIBA. Met betrekking tot het gebruik van de informatie in deze handleiding wordt geen octrooirechtelijke aansprakelijkheid aanvaard.
C870/C870D/L870/L870D/L875/L875D TouchPad is een handelsmerk van Synaptics, Inc. Wi-Fi is een gedeponeerd handelsmerk van de Wi-Fi Alliance. Secure Digital en SD zijn handelsmerken van SD Card Association. MultiMediaCard en MMC zijn handelsmerken van MultiMediaCard Association. Blu-ray Disc™, Blu-ray™, BDXL™, Blu-ray 3D™ en de logo's zijn handelsmerken of gedeponeerde handelsmerken van de Blu-ray Disc Association.
C870/C870D/L870/L870D/L875/L875D van de computer. Het wijzigen of aanpassen van deze apparatuur zonder uitdrukkelijke toestemming van TOSHIBA of door TOSHIBA erkende partijen kan de machtiging tot het gebruik van de apparatuur tenietdoen. FCC-voorwaarden Dit apparaat voldoet aan deel 15 van de FCC-voorschriften. De werking van dit product dient te voldoen aan de volgende twee voorwaarden: 1. 2. Het apparaat mag geen schadelijke storingen veroorzaken.
C870/C870D/L870/L870D/L875/L875D dat het systeem (pc plus opties/kabels) nog steeds aan de vereiste normen voldoet. Ter voorkoming van EMC-problemen moeten in het algemeen de volgende richtlijnen in acht worden genomen: Alleen opties met het CE-keurmerk mogen worden aangesloten/ geïmplementeerd. Alleen hoogwaardige afgeschermde kabels mogen worden aangesloten.
C870/C870D/L870/L870D/L875/L875D NIET-COMMERCIËLE ACTIVITEIT EN DIE IS VERKREGEN VAN EEN VIDEOPROVIDER DIE OVER EEN LICENTIE VAN MPEG LA BESCHIKT OM EEN DERGELIJKE VIDEO AAN TE BIEDEN. VOOR AL HET OVERIGE GEBRUIK WORDT GEEN LICENTIE VERLEEND, OOK NIET IMPLICIET. AANVULLENDE INFORMATIE, INCLUSIEF INFORMATIE MET BETREKKING TOT PROMOTIONEEL, INTERN EN COMMERCIEEL GEBRUIK KAN WORDEN VERKREGEN BIJ MPEG LA, L.L.C. ZIE HTTP://WWW.MPEGLA.COM.
C870/C870D/L870/L870D/L875/L875D Het symbool van een doorgekruiste vuilnisbak geeft aan dat batterijen en/of accu's afzonderlijk moeten worden ingezameld en gescheiden van huishoudelijk afval moeten worden verwerkt.
C870/C870D/L870/L870D/L875/L875D Raadpleeg de volgende website www.toshiba-europe.com/computers/info/ reach voor informatie over de aanwezigheid in onze producten van stoffen die op de kandidatenlijst staan volgens artikel 59(1) van verordening (EG) Nr. 1907/2006 („REACH“) in een concentratie van meer dan 0,1 gewichtsprocent (g/g).
C870/C870D/L870/L870D/L875/L875D ENERGY STAR®-programma Uw computer voldoet mogelijk aan de ENERGY STAR®richtlijnen. Als het model dat u hebt gekocht, hieraan voldoet, is de computer voorzien van het ENERGY STAR®-logo en is de volgende informatie van toepassing. TOSHIBA neemt deel aan het ENERGY STARprogramma van de Environmental Protection Agency (EPA). Deze computer voldoet aan de nieuwste ENERGY STAR-richtlijnen voor energiebesparing.
C870/C870D/L870/L870D/L875/L875D Het gebruik van regelaars, instellingen of procedures anders dan wordt vermeld, kan resulteren in blootstelling aan gevaarlijke straling. Probeer de kast niet te openen. Doet u dit wel, dan loopt u het risico van directe blootstelling aan de laserstraal. 1. Panasonic Precision Devices Co., Ltd. DVD SuperMulti met Double Layer UJ8B0 Blu-ray™-combinatiestation UJ160 Blu-ray™-schrijfstation UJ260 Panasonic Precision Devices Co., Ltd.
C870/C870D/L870/L870D/L875/L875D DVD SuperMulti met Double Layer AD-7760H Complies with 21 CFR, Chapter 1, Subchapter J. Sony Optiarc Inc. 1-11-1 Osaki Shinagawa-ku, Tokyo, 141-0032, Japan Voorzorgsmaatregelen LET OP: Dit apparaat bevat een lasersysteem, dat is geclassificeerd als een KLASSE 1LASERPRODUCT. Om te zorgen dat u dit product correct gebruikt, dient u de gebruiksaanwijzingen zorgvuldig te lezen en ter referentie bij de hand te houden.
C870/C870D/L870/L870D/L875/L875D Voorwoord Gefeliciteerd met de aankoop van deze computer. Deze krachtige, hoogwaardige notebookcomputer staat garant voor jarenlang betrouwbaar computergebruik en biedt uitstekende uitbreidingsmogelijkheden, bijvoorbeeld voor multimediafunctionaliteit. In deze handleiding wordt uitgelegd hoe u uw -computer gebruiksklaar maakt en ermee aan de slag gaat.
C870/C870D/L870/L870D/L875/L875D ABC Als in procedures een actie moet worden uitgevoerd, zoals het klikken op een pictogram of het invoeren van tekst, wordt de naam van het pictogram of de tekst die moet worden ingevoerd, weergegeven in het lettertype dat hier links is afgebeeld. Mededelingen Mededelingen worden in deze handleiding gebruikt om u attent te maken op belangrijke informatie. Elk type mededeling wordt aangeduid zoals hieronder wordt geïllustreerd.
C870/C870D/L870/L870D/L875/L875D Algemene voorzorgsmaatregelen TOSHIBA-computers bieden optimale veiligheid en optimaal gebruikerscomfort; bovendien zijn ze robuust, een belangrijke eigenschap voor draagbare computers. U moet echter bepaalde voorzorgsmaatregelen nemen om het risico van lichamelijk letsel of beschadiging van de computer verder te beperken. Lees de onderstaande algemene aanwijzigen en let op de waarschuwingen die in de handleiding worden gegeven.
C870/C870D/L870/L870D/L875/L875D Extreme hitte, koude of vochtigheid. Vloeistoffen en bijtende chemicaliën. Blessures door overbelasting Lees zorgvuldig de Instructiehandleiding voor veiligheid en comfort. Hierin wordt toegelicht hoe u hand- en polsblessures als gevolg van langdurig toetsenbordgebruik kunt voorkomen. Dit document bevat eveneens informatie over het inrichten van de werkplek, de lichaamshouding en de verlichting, met behulp waarvan u lichamelijke overbelasting kunt reduceren.
C870/C870D/L870/L870D/L875/L875D Hoofdstuk 1 Aan de slag Dit hoofdstuk bevat een controlelijst voor de apparatuur en alle basisgegevens om met uw computer aan de slag te gaan. Sommige voorzieningen die in deze handleiding worden toegelicht, functioneren wellicht niet correct als u een besturingssysteem gebruikt dat niet vooraf door TOSHIBA is geïnstalleerd. Controlelijst van apparatuur Pak de computer voorzichtig uit en bewaar de doos en het verpakkingsmateriaal voor toekomstig gebruik.
C870/C870D/L870/L870D/L875/L875D Corel Digital Studio for TOSHIBA* TOSHIBA eco Utility TOSHIBA HW Setup (hulpprogramma) TOSHIBA Value Added Package TOSHIBA-webcameratoepassing TOSHIBA Service Station TOSHIBA PC Health Monitor TOSHIBA-hulpprogramma Slaapstand* Gebruikershandleiding (deze handleiding) * Aanwezig op sommige modellen. Afhankelijk van het model dat u hebt gekocht, hebt u mogelijk niet alle bovengenoemde software. Aan de slag Lees in elk geval de paragraaf De computer voor het eerst opstarten.
C870/C870D/L870/L870D/L875/L875D Voordat u een apparaat of toepassing installeert, zorgt u ervoor dat alle gegevens in het geheugen worden opgeslagen op de vaste schijf of op een ander opslagmedium. Als u dat niet doet, kan dit mogelijk resulteren in gegevensverlies. De netadapter aansluiten Sluit de netadapter aan wanneer u de accu moet opladen of via de netvoeding wilt werken.
C870/C870D/L870/L870D/L875/L875D Wanneer u de netadapter op de computer aansluit, dient u de stappen precies in de hier beschreven volgorde uit te voeren. Het aansluiten van het netsnoer op een stopcontact moet de laatste stap zijn. Als u deze handeling in een eerder stadium verricht, kan de gelijkstroomuitgangsstekker van de netadapter onder stroom komen te staan, waardoor u het risico van een elektrische schok of persoonlijk letsel loopt. Raak voor de veiligheid geen metalen onderdelen aan.
C870/C870D/L870/L870D/L875/L875D 2. Sluit de uitgangsstekker van de netadapter aan op de gelijkstroominingang (19 V) op de linkerkant van de computer. Afbeelding 1-3 De gelijkstroomuitgangsstekker op de computer aansluiten 1 2 1. Gelijkstroomingang (19 V) 3. 2. Gelijkstroomuitgangsstekker Sluit het netsnoer aan op een stopcontact. Het DC IN-/acculampje op de voorzijde van de computer moet nu gaan branden.
C870/C870D/L870/L870D/L875/L875D Klap het beeldscherm niet dicht als er pennen of soortgelijke voorwerpen tussen het beeldscherm en het toetsenbord zijn achtergebleven. Wanneer u het beeldscherm open- of dichtklapt, moet u een hand op de polssteun plaatsen om de computer op zijn plaats te houden en gebruikt u de andere hand om het beeldscherm voorzichtig open of dicht te klappen (gebruik niet te veel kracht bij het open- of dichtklappen van het beeldscherm).
C870/C870D/L870/L870D/L875/L875D Voor het eerst opstarten Het opstartscherm van Windows 7 wordt als eerste weergegeven wanneer u de computer aanzet. Volg de aanwijzingen in elk scherm om het besturingssysteem te installeren. Lees zorgvuldig de Licentievoorwaarden voor de software door wanneer deze worden weergegeven. De tablet uitschakelen U kunt de computer uitschakelen in een van de volgende drie modi: afsluitmodus, sluimerstand of slaapstand.
C870/C870D/L870/L870D/L875/L875D Als u de computer moet uitschakelen aan boord van een vliegtuig of op een plaats waar elektronische apparaten worden bestuurd of bediend, dient u de computer altijd helemaal uit te zetten. Hierbij moet u ook functies voor draadloze communicatie uitschakelen en instellingen annuleren die de computer automatisch activeren, zoals een opnametimer.
C870/C870D/L870/L870D/L875/L875D De slaapstand uitvoeren U kunt de slaapstand op een van de volgende drie manieren activeren: Klik op Start, wijs het pijlpictogram ( ) aan en selecteer Slaapstand in het menu. Sluit het beeldscherm. Deze functie moet worden ingeschakeld via Energiebeheer (dat u opent door te klikken op Start -> Configuratiescherm -> Systeem en beveiliging -> Energiebeheer). Druk op de aan/uit-knop.
C870/C870D/L870/L870D/L875/L875D Voordelen van de sluimerstand De sluimerstand biedt de volgende voordelen. Wanneer de computer automatisch wordt afgesloten omdat de accu bijna leeg is, worden gegevens op de vaste schijf opgeslagen. Na het inschakelen van de computer kunt u direct naar uw vorige werkomgeving terugkeren.
C870/C870D/L870/L870D/L875/L875D als u bepaalde computerinstellingen hebt gewijzigd; Als er een fout optreedt en de computer niet reageert op toetsenbordopdrachten. Als u de computer opnieuw moet opstarten, zijn er drie manieren om dit te doen: Klik op Start, wijs het pijlpictogram ( ) aan en selecteer Opnieuw opstarten in het menu. Druk tegelijk op CTRL, ALT en DEL (eenmaal) om het menuvenster weer te geven en selecteer Opnieuw starten onder Opties voor afsluiten.
C870/C870D/L870/L870D/L875/L875D Hoofdstuk 2 Rondleiding In dit hoofdstuk worden de verschillende onderdelen van de computer beschreven. Het wordt aanbevolen vertrouwd te raken met elk onderdeel voordat u de computer gebruikt. Wettelijke voetnoot (niet-toepasselijke pictogrammen) Raadpleeg bijlage C, Wettelijke voetnoten, voor meer informatie over niettoepasselijke pictogrammen. Ga voorzichtig om met de computer om krassen of beschadiging van het oppervlak te voorkomen.
C870/C870D/L870/L870D/L875/L875D Aan/uit-lampje Het aan/uit-lampje brandt wit als de computer aanstaat. Als u de computer echter uitschakelt naar de slaapstand, knippert dit lampje wit (circa twee seconden aan, twee seconden uit). Lampje voor draadloze communicatie Het lampje voor draadloze communicatie brandt oranje wanneer de functies voor Bluetooth of draadloos LAN zijn ingeschakeld. Alleen sommige modellen zijn voorzien van functies voor Bluetooth en draadloos LAN.
C870/C870D/L870/L870D/L875/L875D Universal Serial Bus (USB 2.0)-poorten Eén USB-poort, die voldoet aan de USB 2.0standaard, bevindt zich in de linkerkant van de computer. Een USB 2.0-poort is niet compatibel met USB 3.0-apparaten. Het is niet mogelijk om het gebruik van alle functies van alle USBapparaten die beschikbaar zijn te bevestigen. Het is in dit verband van belang te weten dat sommige functies die verbonden zijn aan een bepaald apparaat, niet goed werken.
C870/C870D/L870/L870D/L875/L875D Het ingebouwde geluidssysteem ondersteunt de interne luidsprekers en microfoon van de computer en biedt aansluitingsmogelijkheden voor een externe microfoon en een hoofdtelefoon. Universal Serial Buspoorten (USB 2.0 of 3.0) Twee USB-poorten, die voldoen aan de USB 2.0of 3.0-standaard, bevinden zich in de rechterkant van de computer. Het type USB-poort hangt af van het gekochte model. De blauwe poort is de USB 3.0-poort. De USB 2.0-poort is compatibel met de USB 2.
C870/C870D/L870/L870D/L875/L875D Luchtopeningen De luchtopeningen helpen oververhitting van de processor voorkomen. Sleuf beveiligingsslot Aan deze sleuf kunt u een beveiligingskabel bevestigen waarmee u de computer aan een bureau of ander groot voorwerp kunt verankeren ter bescherming tegen diefstal. Achterkant De volgende afbeelding illustreert de achterkant van de computer. Afbeelding 2-4 De achterkant van de computer 1 1. Accu-eenheid De vormgeving van het product verschilt per model.
C870/C870D/L870/L870D/L875/L875D Afbeelding 2-5 Onderkant van de computer 1 2 3 4 1. Accuvergrendeling 2. Ontgrendelingsschuif accuhouder 3. Sleuf voor geheugenmodule 4. Luchtopeningen De vormgeving van het product verschilt per model. Accuvergrendeling Duw de accuvergrendeling opzij, zodat u de accu-eenheid gemakkelijk kunt verwijderen. Ontgrendelingsschuif Zet de accuvergrendeling in de ontgrendelde accuhouder stand, zodat u de accu-eenheid kunt verwijderen.
C870/C870D/L870/L870D/L875/L875D beschadigd raakt en er brand ontstaat, met mogelijk ernstig letsel tot gevolg. Verwijder het stof van het oppervlak van de luchtopeningen voorzichtig met een zachte doek. Voorkant met geopend beeldscherm In deze paragraaf wordt de computer met geopend beeldscherm beschreven. U opent het scherm door dit omhoog te klappen en in een comfortabele kijkhoek te plaatsen. Afbeelding 2-6 De voorkant van de computer met geopend beeldscherm 3 2 1 4 6 7 8 5 12 7 10 8 11 9 1.
C870/C870D/L870/L870D/L875/L875D Microfoon Met de ingebouwde microfoon kunt u geluid voor uw toepassing importeren en opnemen. Raadpleeg de paragraaf Geluidssysteem in hoofdstuk 3, Basisbeginselen, voor meer informatie. Webcamlampje Het webcamlampje brandt wanneer de webcam wordt gebruikt. Webcam Een webcam is een apparaat waarmee u video kunt opnemen of foto's kunt maken met uw computer.
C870/C870D/L870/L870D/L875/L875D Wettelijke voetnoot (LCD) Raadpleeg bijlage C, Wettelijke voetnoten, voor meer informatie over het LCD-scherm. Aan/uit-knop Druk op deze knop om de computer in of uit te schakelen. Beeldschermscharnieren Dankzij de beeldschermscharnieren kunt u het beeldscherm in de gewenste, comfortabele stand zetten.
C870/C870D/L870/L870D/L875/L875D Interne hardwareonderdelen In dit gedeelte worden de interne hardwareonderdelen van de computer beschreven. De werkelijke specificaties hangen af van het gekochte model. CPU Het type processor hangt af van het model. Als u wilt controleren welk type processor uw model bevat, opent u TOSHIBA PC diagnoseprogramma door te klikken op Start -> Alle programma's -> TOSHIBA -> Ondersteuning & herstel -> PC diagnoseprogramma.
C870/C870D/L870/L870D/L875/L875D Video-RAM Het geheugen in de grafische kaart van een computer, dat wordt gebruikt om het beeld op te slaan dat wordt weergegeven op een bitmapscherm. De beschikbare hoeveelheid video-RAM is afhankelijk van het systeemgeheugen van de computer. Start -> Configuratiescherm -> Vormgeving en persoonlijke instellingen -> Beeldscherm > Resolutie aanpassen.
C870/C870D/L870/L870D/L875/L875D Energiebesparingstechnologie voor beeldschermen van Intel® Het model met een Intel GPU beschikt mogelijk over de energiebesparingstechnologie voor beeldschermen die het stroomverbruik van de computer kan verminderen door het beeldcontrast op het interne LCD-scherm te optimaliseren.
C870/C870D/L870/L870D/L875/L875D In dit venster: 1. 2. Selecteer PowerPlay™ onder Power (Stroom). Schakel het selectievakje Enable PowerPlay™ (PowerPlay inschakelen) in en schakel vervolgens het selectievakje Enable VariBright™ (Vari-Bright inschakelen) in. Als u de beeldkwaliteit in de bovengenoemde omstandigheden wilt verbeteren, past u de instellingen aan naar Maximize Quality (Maximale kwaliteit) of schakelt u de functie uit.
C870/C870D/L870/L870D/L875/L875D Hoofdstuk 3 Basisbeginselen In dit hoofdstuk worden de basisbeginselen van computergebruik beschreven en wordt toegelicht welke voorzorgsmaatregelen u daarbij dient te treffen. Het touchpad gebruiken Als u het touchpad wilt gebruiken, dient u uw vingertop op het touchpad te plaatsen en deze in de richting te bewegen waarin u de schermaanwijzer wilt verplaatsen. Afbeelding 3-1 Touchpad en touchpadbesturingsknoppen 1 2 1. Touchpad 2.
C870/C870D/L870/L870D/L875/L875D drukken kunnen alle uitgebreide functies van dit toetsenbord op de computer worden uitgevoerd. Het aantal toetsen op uw toetsenbord is afhankelijk van de toetsenbordindeling waarmee uw computer is geconfigureerd. Er zijn toetsenborden voor verschillende talen beschikbaar. Er zijn zes soorten toetsenbordtoetsen: typemachinetoetsen, functietoetsen, zogenoemde 'softkeys', sneltoetsen en speciale Windowstoetsen. Verwijder nooit de toetsen van het toetsenbord.
C870/C870D/L870/L870D/L875/L875D F1 tot en met F12 worden functietoetsen genoemd omdat ze geprogrammeerde functies uitvoeren als ze worden ingedrukt. In combinatie met de toets FN voeren toetsen die gemarkeerd zijn met een pictogram speciale functies uit op de computer. Softkeys: FN-toetscombinaties De toets FN (functie) vormt in combinatie met andere toetsen 'softkeys'. Softkeys zijn toetscombinaties die specifieke voorzieningen activeren, uitschakelen of configureren.
C870/C870D/L870/L870D/L875/L875D 3. U rouleert door de weergegeven opties door FN ingedrukt te houden en meerdere malen op de sneltoets te drukken. Laat de FN-toets los zodra de gewenste optie is geselecteerd. Raadpleeg het Help-bestand voor TOSHIBA Flash Cards voor meer informatie. Voor toegang tot deze Help klikt u op Start -> Alle programma's -> TOSHIBA -> Hulpprogramma's -> Flash Cards. Klik in het venster Instellingen voor Flash Cards op de knop Help.
C870/C870D/L870/L870D/L875/L875D Speciale functiemodus Standaard F1F12-modus Functie FN + 1 FN + 1 Hiermee verkleint u pictogrammen op het bureaublad of de tekengrootte binnen een van de ondersteunde toepassingsvensters. FN + 2 FN + 2 Hiermee vergroot u pictogrammen op het bureaublad of de tekengrootte binnen een van de ondersteunde toepassingsvensters.. FN + spatiebalk FN + spatiebalk Wijzigt de beeldschermresolutie.
C870/C870D/L870/L870D/L875/L875D Optische stations De computer wordt geleverd met een geïnstalleerd DVD Super Multistation, Blu-ray™-combinatiestation of Blu-ray™-schrijfstation (BDXL™). Wanneer de computer toegang heeft tot een optische schijf, brandt het lampje op het station. Indelingen De stations ondersteunen de volgende indelingen.
C870/C870D/L870/L870D/L875/L875D 1. 2. Zorg dat de computer is ingeschakeld en druk op de uitwerpknop om de stationslade enigszins te openen. Trek de schijflade voorzichtig uit totdat deze volledig is geopend. Afbeelding 3-6 Drukken op de uitwerpknop en de stationslade opentrekken 2 1 1. Uitwerpknop 3. 2. Schijflade Leg de schijf met het opschrift omhoog in de schijflade. Afbeelding 3-7 Een schijf plaatsen 1 1.
C870/C870D/L870/L870D/L875/L875D Als de schijf niet goed zit wanneer de schijflade gesloten is, bestaat het risico dat de schijf beschadigd raakt. Bovendien kan het dan gebeuren dat de schijflade niet volledig wordt geopend wanneer u op de uitwerpknop drukt. Schijven verwijderen Voer de volgende stappen uit om schijf te verwijderen: Druk niet op de uitwerpknop terwijl er activiteit in het optische station plaatsvindt. Wacht totdat het lampje voor het optische station uit is voordat u de schijflade opent.
C870/C870D/L870/L870D/L875/L875D Beschrijfbare schijven In deze paragraaf worden de verschillende soorten beschrijfbare schijven beschreven. Controleer in de specificaties van uw station welke schijftypen kunnen worden beschreven. Gebruik TOSHIBA Disc Creator en Corel Digital Studio om CD's te beschrijven. CD's Beschrijfbare CD's (CD-R's) kunnen slechts één keer worden beschreven. De opgenomen gegevens kunnen niet worden gewist of veranderd.
C870/C870D/L870/L870D/L875/L875D Wanneer u media beschrijft met behulp van een optisch station, moet u de netadapter altijd aansluiten op een stopcontact. Als gegevens worden weggeschreven bij gebruik van de accu, kan het wegschrijven soms mislukken omdat de accu bijna leeg is. Dit kan resulteren in gegevensverlies. Belangrijk bericht Lees dit gedeelte grondig door voordat u media gaat beschrijven die door het optische station worden ondersteund en volg alle configuratie- en gebruiksaanwijzingen.
C870/C870D/L870/L870D/L875/L875D DVD-R: DVD-specificaties voor beschrijfbare schijven voor algemeen gebruik, versie 2.0 TAIYO YUDEN Co., Ltd. (voor 8- en 16-speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (voor 8- en 16-speed media) Hitachi Maxell, Ltd. (voor 8x- en 16x-speed media) DVD-R DL: MITSUBISHI KAGAKU MEDIA Co., Ltd. (voor 4x- en 8x-speed media) DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (voor 8- en 16-speed media) TAIYO YUDEN Co., Ltd.
C870/C870D/L870/L870D/L875/L875D BD-R TL: TDK. SHARP BD-RE TL: Panasonic Corporation DVD-R DL- en DVD+R DL-schijven in bepaalde indelingen kunnen onleesbaar zijn. Schijven die zijn gemaakt als DVD-R DL indeling 4 (Layer Jump Recording) kunnen niet worden gelezen. Tijdens schrijven of herschrijven Neem de volgende punten in acht wanneer u een medium beschrijft of herschrijft: Kopieer gegevens altijd van de vaste schijf naar het optische station.
C870/C870D/L870/L870D/L875/L875D Plaats de computer op een egaal, horizontaal oppervlak en vermijd plaatsen waar trillingen waarneembaar zijn, bijvoorbeeld auto's, treinen en vliegtuigen. Gebruik ook geen instabiele plekken zoals een wankele tafel. Houd mobiele telefoons en andere draadloze communicatieapparaten uit de buurt van de computer.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Disc Creator ondersteunt het opnemen naar DVD-RAMschijven niet. Hiervoor hebt u Windows Verkenner of een soortgelijk hulpprogramma nodig. Als u een back-up maakt van een DVD, dient u ervoor te zorgen dat het bronstation het opnemen naar DVD-R, DVD-R DL, DVD-RW, DVD +R, DVD+R DL of DVD+RW ondersteunt. Als dit niet het geval is, zal de back-up van de bronschijf mogelijk niet goed zijn.
C870/C870D/L870/L870D/L875/L875D 3. 4. 5. 6. 7. 8. 9. Zoek een videobron en sleep deze naar de Media Tray. Klik op Burn -> Video Disc. Selecteer DVD of Blu-ray bij Select disc (Schijf selecteren). Selecteer DVD-Video of BDMV voor Project format (Projectindeling). Voer een projectnaam in en selecteer een stijl. Klik op de knop Go to menu editing (Ga naar menubewerking). Klik op de knop Burn (Branden).
C870/C870D/L870/L870D/L875/L875D Stel de werkschijf niet in op een traag apparaat, zoals een vaste schijf met USB 1.1, omdat anders geen DVD’s of Blu-ray Discs™ kunnen worden geschreven. Vermijd de volgende handelingen: Gebruik van de computer zoals het hanteren van het aanwijsapparaat en het sluiten/openen van het LCD-scherm. Handelingen waardoor de computer wordt blootgesteld aan schokken of trillingen. Gebruik van de modusschakelaar en audio-/ videobedieningsknoppen om muziek of spraak te reproduceren.
C870/C870D/L870/L870D/L875/L875D Niet-afgesloten DVD's die zijn gemaakt op een gewone DVD-recorder kunnen mogelijk niet worden afgespeeld op de computer. Gebruik DVD-video's met een de regiocode 'gelijk aan de standaardfabrieksinstelling' (indien van toepassing) of 'alles'. Speel geen video af terwijl u met een ander programma een televisieprogramma kijkt of opneemt. Hierdoor kunnen fouten ontstaan in de weergave van DVD-video of de opname van het televisieprogramma.
C870/C870D/L870/L870D/L875/L875D Beeldschermen en geluid TOSHIBA VIDEO PLAYER kan alleen worden uitgevoerd als 'Kleuren' is ingesteld op 'Ware kleuren (32 bits)'. Klik op Start -> Configuratiescherm -> Vormgeving en persoonlijke instellingen > Beeldscherm -> Resolutie aanpassen, klik op 'Geavanceerde instellingen', selecteer het tabblad 'Monitor' en stel 'Kleuren' in op 'Ware kleuren (32-bits)'.
C870/C870D/L870/L870D/L875/L875D De handleiding van TOSHIBA VIDEO PLAYER openen De functies van en instructies voor TOSHIBA VIDEO PLAYER worden uitgebreid toegelicht in de handleiding van TOSHIBA VIDEO PLAYER. Voer de volgende stappen uit om de handleiding van TOSHIBA VIDEO PLAYER te openen. Druk op de toets F1 terwijl TOSHIBA VIDEO PLAYER is gestart en klik op de knop Help.
C870/C870D/L870/L870D/L875/L875D Speel geen Blu-ray Disc™ af terwijl u een televisieprogramma opneemt met Windows Media Center, Mijn tv of een andere toepassing. Hierdoor kunnen fouten ontstaan in de weergave van de Blu-ray Disc™ of de opname van het televisieprogramma. Als een voorgeprogrammeerde opname start tijdens weergave van een video op een Blu-ray Disc™, kan dit fouten veroorzaken in de weergave van de Blu-ray Disc™ of de opname van het televisieprogramma.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Blu-ray™ Disc Player gebruiken Opmerkingen over het gebruik van TOSHIBA Blu-ray™ Disc Player. De schermweergave en de beschikbare functies kunnen per Bluray™-video en per scène verschillen. Als het menu in het weergavegebied wordt geopend via de knoppen Top Menu of Menu, is bediening via het touchpad of muismenu wellicht niet mogelijk.
C870/C870D/L870/L870D/L875/L875D Lees de gebruikershandleiding bij de computer zorgvuldig door voordat u de 3D-weergavefunctie gebruikt. Het 3D-effect verschilt per persoon. Opmerkingen over 3D-weergave voor TOSHIBA VIDEO PLAYER TOSHIBA VIDEO PLAYER biedt een 3D-weergavefunctie die 3D-videoinhoud kan afspelen en 2D-homevideo's (DVD of videobestand) kan omzetten in 3D met behulp van real-time 2D-naar-3D-conversie.
C870/C870D/L870/L870D/L875/L875D Er kan enige vertraging optreden als u een van de volgende bewerkingen uitvoert terwijl het videoweergavevenster schermvullend wordt weergegeven. Vensters weergeven zoals het menu van de rechtermuisknop, het instellingenvenster, [Titel/hoofdstuk zoeken], [Bestand selecteren] of een foutbericht. Bewerkingen in Windows Bewerkingen in andere toepassingen Zorg dat de netadapter is aangesloten wanneer de 3Dweergavefunctie wordt gebruikt.
C870/C870D/L870/L870D/L875/L875D De 3D-weergavefunctie van de speler is alleen bedoeld voor persoonlijk gebruik thuis. Houd er rekening mee dat toepasselijke auteurswetten weergave in het openbaar kunnen verbieden wanneer u 3D-weergave van video-inhoud van derden aanbiedt aan onbekende personen of een groot publiek. De functie voor 2D-naar-3D-conversie gebruikt TOSHIBA’s originele algoritme om een 3D-effect toe te passen op uw eigen 2D-video's.
C870/C870D/L870/L870D/L875/L875D Afhankelijk van de systeemomgeving kan de speler automatisch overschakelen naar 2D als u een van de volgende bewerkingen uitvoert tijdens 3D-weergave. Bovendien kunt u enige vertraging ondervinden wanneer de omschakeling plaatsvindt. - Vensters of pop-upmenu's openen zoals het menu van de rechtermuisknop, het instellingenvenster, [Bestand selecteren] of een foutbericht. - Windows-functies gebruiken. - Andere toepassingen gebruiken.
C870/C870D/L870/L870D/L875/L875D Deze software kan MPEG2-, MP4- en WTV-bestanden afspelen. Uw eigen 2D-video-inhoud die u hebt opgenomen met een videocamcorder en andere inhoud die u zelf hebt gemaakt kan worden afgespeeld in 2D of in 3D met behulp van real-time 2D-naar-3Dconversie. Voor de weergave van 3D-video-inhoud worden alleen de 3D-video-indelingen Side-by-Side en Interleave ondersteund. Niet alle bestanden kunnen worden afgespeeld.
C870/C870D/L870/L870D/L875/L875D Selectie van frequentiekanaal van 2,4 GHz voor IEEE 802.11b/g en/of IEEE.802.
C870/C870D/L870/L870D/L875/L875D Netwerkbesturingssysteem Microsoft Windows Networking Media Access Protocol CSMA/CA (Collision Avoidance) met ACK (Acknowledgement) Radiospecificaties De radiospecificaties van draadloos LAN-modules kunnen variëren afhankelijk van: land/regio waarin het product is aangeschaft type product Draadloze communicatie is vaak gebonden aan plaatselijke voorschriften voor radiocommunicatie.
C870/C870D/L870/L870D/L875/L875D Wereldwijde toepasbaarheid De Bluetooth-radiozender en -ontvanger werkt op de 2,4-GHz band. Deze band, waarvoor geen vergunning nodig is, is compatibel met radiosystemen in de meeste landen. Radioverbindingen U kunt eenvoudig verbindingen tot stand brengen tussen twee of meer apparaten, deze verbindingen worden gehandhaafd zelfs als de apparaten buiten het gezichtsveld van elkaar liggen.
C870/C870D/L870/L870D/L875/L875D Productondersteuning: De nieuwste informatie over de ondersteuning van besturingssystemen, taalondersteuning of beschikbare upgrades vindt u op onze website in Europa (http://www.toshiba-europe.com/computers/tnt/bluetooth.htm) of de Verenigde Staten (www.pcsupport.toshiba.com).
C870/C870D/L870/L870D/L875/L875D Sluit de netadapter aan alvorens de LAN-kabel aan te sluiten. Tijdens LAN-gebruik moet de netadapter aangesloten blijven. Als u de netadapter ontkoppelt terwijl de computer gegevens uitwisselt met een LAN, wordt de verbinding wellicht verbroken. Sluit uitsluitend LAN-kabels aan op de LAN-poort. Doet u dat wel, dan kan dit schade of storingen veroorzaken. Sluit geen voedingsapparaat aan op de LAN-kabel die aan de LANpoort is gekoppeld.
C870/C870D/L870/L870D/L875/L875D Randapparaten Externe monitor HDMI-apparaat Overige Beveiligingsslot Optionele TOSHIBA-accessoires Geheugenmediasleuf Deze computer is uitgerust met een geheugenmediasleuf waarin u verschillende soorten geheugenmedia met diverse capaciteiten kunt plaatsen, zodat u eenvoudig gegevens kunt overbrengen vanaf apparaten zoals digitale camera's en PDA's (Personal Digital Assistants). Zorg dat er geen voorwerpen in de geheugenmediasleuf terechtkomen.
C870/C870D/L870/L870D/L875/L875D Geheugenmedia Dit gedeelte bevat belangrijke voorzorgsmaatregelen voor een correcte behandeling van geheugenmedia. Aandachtspunten met betrekking tot geheugenkaarten SD/SDHC/SDXC-geheugenkaarten zijn compatibel met SDMI (Secure Digital Music Initiative), een technologie ter voorkoming van het illegaal kopiëren of afspelen van digitale muziek.
C870/C870D/L870/L870D/L875/L875D digitale audiospeler, dat geheugenkaarten gebruikt en niet met de formatteeropdracht van Windows. Als u alle gebieden van de SD-geheugenkaart wilt formatteren, inclusief het beschermde gebied, dient u een toepassing aan te schaffen die overweg kan met het kopieerbeveiligingssysteem. Behandeling van schijven Neem de volgende voorzorgsmaatregelen voor de behandeling van kaarten in acht. Buig kaarten niet.
C870/C870D/L870/L870D/L875/L875D 1. 2. 3. Draai het geheugenmedium zodanig dat de contactpunten (metalen delen) naar beneden zijn gericht. Plaats het geheugenmedium in de geheugenmediasleuf aan de voorkant van de computer. Duw het geheugenmedium voorzichtig aan tot dit stevig vastzit. Het geheugenmedium komt gedeeltelijk uit de sleuf naar voren. Afbeelding 3-11 Een geheugenmedium plaatsen 1 2 1. Geheugenmediasleuf 2.
C870/C870D/L870/L870D/L875/L875D Aanvullende geheugenmodule U kunt het geheugen van de computer uitbreiden om de hoeveelheid beschikbaar systeemgeheugen te vergroten. In dit gedeelte wordt beschreven hoe u een optionele geheugenmodule installeert en verwijdert. Leg een doek onder de computer om te voorkomen dat het deksel wordt beschadigd wanneer u de geheugenmodules plaatst/vervangt. Gebruik geen doek van materiaal dat statische elektriciteit genereert of vasthoudt.
C870/C870D/L870/L870D/L875/L875D 3. 4. 5. 6. Sluit het beeldscherm. Draai de computer ondersteboven en verwijder de accu-eenheid (raadpleeg zo nodig de paragraaf De accu-eenheid vervangen in hoofdstuk 5, Stroomvoorziening en slaapstanden). Draai de schroef los waarmee het afdekplaatje van de geheugenmodules is bevestigd. De schroef is aan het plaatje bevestigd om zoekraken te voorkomen. Schuif uw nagel of een dun voorwerp onder het plaatje en til het op.
C870/C870D/L870/L870D/L875/L875D 7. Breng het uitstekende gedeelte van de geheugenmodule op één lijn met de geheugensleuf en plaats de voorzichtig in de sleuf onder een hoek van ongeveer 30 graden. Duw de module vervolgens omlaag tot deze aan weerszijden vastklikt. Afbeelding 3-13 De geheugenmodule plaatsen 2 1 3 1. Inkeping 2. Sleuf B 3. Sleuf A De vormgeving van het product verschilt per model.
C870/C870D/L870/L870D/L875/L875D 8. Plaats het afdekplaatje van de geheugenmodule terug en bevestig het met de schroef. Zorg ervoor dat het afdekplaatje goed vastzit. Afbeelding 3-14 Het afdekplaatje over de geheugenmodule plaatsen 2 1 1. Afdekplaatje geheugenmodule 2. Schroef De vormgeving van het product verschilt per model. 9. Installeer de accu-eenheid. Raadpleeg indien nodig de paragraaf De accu-eenheid vervangen in hoofdstuk 5, Stroomvoorziening en spaarstanden. 10. Draai de computer om.
C870/C870D/L870/L870D/L875/L875D 7. 8. Druk de veertjes naar buiten om de module los te maken. Eén uiteinde van de module komt schuin omhoog. Pak de module bij de randen vast en verwijder hem uit de computer. Bij langdurig computergebruik worden de geheugenmodules en de nabijgelegen schakelingen heet. Laat de geheugenmodules in dat geval afkoelen tot kamertemperatuur alvorens ze te hanteren. Als u de modules eerder aanraakt, kunt u zich branden.
C870/C870D/L870/L870D/L875/L875D Afbeelding 3-16 De monitorkabel aansluiten op de poort voor een externe RGB-monitor 1 2 1. Poort voor externe RGB-monitor 2. Monitorkabel De computerpoort voor een externe RGB-monitor bevat geen bevestigingsschroeven voor een monitorkabel. Monitorkabels met bevestigingsschroeven kunnen echter wel worden gebruikt. 2. Zet de externe monitor aan.
C870/C870D/L870/L870D/L875/L875D Aangezien de poortwerking niet van alle HDMI-beeldschermen (HighDefinition Multimedia Interface) is gecontroleerd, werken sommige HDMIbeeldschermen mogelijk niet correct. De HDMI-uit-poort aansluiten 1. 2. Sluit het ene uiteinde van de HDMI-kabel aan op de HDMI-uit-poort van het HDMI-apparaat. Sluit het andere uiteinde van de HDMI-kabel aan op de HDMI-uit-poort van de computer. Afbeelding 3-17 De HDMI-uit-poort aansluiten 1 2 1. HDMI-uit-poort 2.
C870/C870D/L870/L870D/L875/L875D 5. Klik op OK om het dialoogvenster Geluid te sluiten. Instellingen voor beeldweergave op HDMI Als u beelden op een HDMI-apparaat wilt weergeven, dient u de volgende instellingen te configureren. Als u dit niet doet, wordt er mogelijk niets weergegeven. Gebruik voordat u de video gaat afspelen, de sneltoets om het weergaveapparaat te selecteren. Kies tijdens het afspelen geen ander weergaveapparaat.
C870/C870D/L870/L870D/L875/L875D Afbeelding 3-18 Beveiligingsslot 1 2 1. Sleuf beveiligingsslot 2. Beveiligingsslot Optionele TOSHIBA-accessoires U kunt uw computer nog krachtiger en gebruikersvriendelijker maken door een aantal opties en accessoires toe te voegen.
C870/C870D/L870/L870D/L875/L875D Microfoonvolume Volg de onderstaande stappen om het opnamevolume van de microfoon te wijzigen. 1. 2. 3. Klik met de rechtermuisknop op het luidsprekerpictogram op de taakbalk en selecteer Opnameapparaten in het submenu. Selecteer Microfoon en klik op Eigenschappen. Versleep de schuifregelaar Microfoon op het tabblad Niveaus om het volume van de microfoon te verhogen of te verlagen.
C870/C870D/L870/L870D/L875/L875D Energiebeheer De audiocontroller in uw computer kan worden uitgeschakeld wanneer de audiofunctie niet actief is. Als u de configuratie van het audioenergiebeheer wilt aanpassen, klikt op de batterijknop . Als audio-energiebeheer is ingeschakeld, is de knop met het rondje linksboven in Power Management (Energiebeheer) blauw en bol. Als deze knop zwart en hol is, is audio-energiebeheer uitgeschakeld.
C870/C870D/L870/L870D/L875/L875D Reinig de plastic delen van de computer met een licht bevochtigde doek. U kunt het beeldscherm reinigen door een kleine hoeveelheid reinigingsmiddel op een zachte, schone doek te sproeien en het scherm voorzichtig af te vegen. Sproei schoonmaakmiddel nooit rechtstreeks op de computer en laat er geen vloeistof inlopen. Gebruik nooit bijtende chemicaliën om de computer te reinigen.
C870/C870D/L870/L870D/L875/L875D Zodra de temperatuur van de processor tot een normaal niveau is gedaald, wordt de ventilator uitgeschakeld en werkt de processor weer op de standaardsnelheid. Als de temperatuur van de processor bij een van beide instellingen een onaanvaardbaar hoog niveau bereikt, wordt de computer automatisch uitgeschakeld om beschadiging te voorkomen. In dat geval gaan alle nietopgeslagen gegevens in het geheugen verloren.
C870/C870D/L870/L870D/L875/L875D Hoofdstuk 4 Hulpprogramma's en geavanceerd gebruik In dit hoofdstuk worden de hulpprogramma's en speciale voorzieningen van deze computer beschreven en wordt het geavanceerde gebruik van bepaalde hulpprogramma's toegelicht. Hulpprogramma's en toepassingen In deze paragraaf worden de op de computer voorgeïnstalleerde hulpprogramma's beschreven en er wordt toegelicht hoe u de programma's start.
C870/C870D/L870/L870D/L875/L875D Wanneer het systeem opstart in de modus Snel starten, gelden er enkele beperkingen voor de instellingen in BIOS Setup. Als u BIOS Setup wilt gebruiken, gebruik dan de modus Snel starten niet. Voer BIOS Setup uit nadat u Windows hebt afgesloten. Sluit alle actieve programma's voordat u de modus Snel starten gebruikt.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Assist TOSHIBA Assist is een grafische gebruikersinterface waarmee u toegang krijgt tot speciale hulpprogramma's en toepassingen die het gebruik en de configuratie van de computer vereenvoudigen. Start het hulpprogramma door te klikken op Start -> Alle programma's -> TOSHIBA -> Ondersteuning & herstel -> TOSHIBA Assist. TOSHIBA eco Utility Deze computer beschikt over een 'ecostand'.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Blu-ray Disc Player Deze software wordt meegeleverd voor weergave van Blu-ray-schijven™. De speler heeft een scherminterface en -functies. U start dit hulpprogramma door te klikken op Start -> Alle programma's -> TOSHIBA -> Media & entertainment -> TOSHIBA Blu-ray Disc Player.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Media Con- Met deze toepassing kunt u muziek, foto's en troller video's afspelen door de inhoud naar een compatibel apparaat in uw huis te streamen. U opent dit hulpprogramma door te klikken op Start -> Alle programma's -> TOSHIBA -> Media & entertainment -> TOSHIBA Media Controller. Voor meer informatie raadpleegt u de Help van TOSHIBA Media Controller.
C870/C870D/L870/L870D/L875/L875D Systeem automatisch Met deze functie wordt het systeem automatisch in slaapstand/sluimer- in de slaapstand of de sluimerstand gezet als een bepaalde tijd lang geen invoer of stand *1 hardwareactiviteit heeft plaatsgevonden. Dit kan worden ingesteld via Energiebeheer. Wachtwoord voor op- Er zijn twee niveaus van wachtwoordbeveiliging starten om ongeoorloofd gebruik van uw computer te voorkomen.
C870/C870D/L870/L870D/L875/L875D Slaapstand Als u uw werk moet onderbreken, kunt u met deze functie de computer uitschakelen zonder de software te hoeven sluiten De gegevens worden opgeslagen in het hoofdgeheugen van de computer, zodat u kunt verder werken waar u was gebleven wanneer u de computer weer aanzet. De functie voor activering via USB Deze functie herstelt de computer uit de slaapstand, afhankelijk van de externe apparaten die op de USB-poorten zijn aangesloten.
C870/C870D/L870/L870D/L875/L875D De functie 'Slaapstand en laden' werkt echter mogelijk niet bij bepaalde externe apparaten, zelfs als deze compatibel zijn met de USB-specificatie. Zet in die gevallen de computer aan om het apparaat op te laden. Als de functie 'Slaapstand en laden' is ingeschakeld, krijgen compatibele USB-poorten stroom (5 V gelijkstroom), zelfs als de computer is uitgeschakeld. Er wordt ook stroom (5 V) geleverd aan externe apparaten die op de compatibele USB-poorten zijn aangesloten.
C870/C870D/L870/L870D/L875/L875D Slaapstand en laden inschakelen Dit hulpprogramma kan worden gebruikt om de functie voor Slaapstand en laden in en uit te schakelen. Schakel het selectievakje Slaapstand en laden inschakelen in om deze functie in te schakelen voor compatibele USB-poorten. Deze voorziening is standaard uitgeschakeld. Instellingen voor de stroomvoorzieningsmodus Uw computer biedt diverse oplaadmodi, zodat veel verschillende USBapparaten worden ondersteund door de functie Slaapstand en laden.
C870/C870D/L870/L870D/L875/L875D Raadpleeg de paragraaf Gebruikerswachtwoord van HW Setup voor meer informatie. Supervisorwachtwoord Als u een supervisorwachtwoord instelt, zijn bepaalde functies beperkt wanneer een gebruiker zich aanmeldt met het gebruikerswachtwoord.
C870/C870D/L870/L870D/L875/L875D Nadat u de instellingen van HW Setup hebt gewijzigd, kan een dialoogvenster worden weergegeven waarin wordt vermeld dat de wijzigingen worden toegepast nadat u de computer opnieuw hebt opgestart. Zorg dat u de computer direct opnieuw opstart om deze wijzigingen toe te passen. HW Setup starten U start het programma HW Setup door te klikken op Start -> Alle programma's -> TOSHIBA -> Hulpprogramma's -> HW Setup.
C870/C870D/L870/L870D/L875/L875D Gebruikerswachtwoord Hiermee kunt een nieuw wachtwoord registreren of een bestaand wachtwoord wijzigen/verwijderen. Niet geregistreerd Het wachtwoord wijzigen of verwijderen (standaardinstelling). Geregistreerd Het wachtwoord selecteren. Er verschijnt een venster waarin u het wachtwoord kunt instellen. U voert als volgt een gebruikerswachtwoord in: 1. Selecteer Geregistreerd om de volgende melding weer te geven: Wachtwoord invoeren: 2. 3. Voer een wachtwoord in.
C870/C870D/L870/L870D/L875/L875D Beeldscherm bij opstarten Met deze optie kunt u het beeldscherm selecteren dat wordt gebruikt wanneer de computer wordt ingeschakeld. Let erop dat deze instelling alleen beschikbaar is in de standaard VGA-modus en niet beschikbaar is in de eigenschappen van het Windows-bureaublad. De functie voor beeldscherm bij opstarten wordt ondersteund door bepaalde modellen. Autom. geselecteerd Hiermee wordt een externe monitor geselecteerd als deze is aangesloten.
C870/C870D/L870/L870D/L875/L875D Snel Verkort de opstarttijd van het systeem. Het systeem kan alleen opstarten vanaf de Ingebouwde vaste schijf en alleen het interne LCD-scherm en toetsenbord worden tijdens het opstartproces ondersteund. Normaal Het systeem start met de normale snelheid op. (Standaard) Inschakelen door scherm te openen Met deze functie kunt u de instelling Inschakelen door scherm te openen wijzigen. Ingeschakeld Schakelt de functie Inschakelen door scherm te openen in.
C870/C870D/L870/L870D/L875/L875D Ingeschakeld Schakelt Activering op toetsenbord in. Uitgeschakeld Schakelt Activering op toetsenbord uit (standaardinstelling). USB USB Legacy-ondersteuning Gebruik deze optie om USB Legacy-emulatie in of uit te schakelen. Zelfs als USB niet door uw besturingssysteem wordt ondersteund, kunt u een USB-muis en -toetsenbord gebruiken door de optie USB Legacyondersteuning in te schakelen. Ingeschakeld Schakelt USB Legacy-emulatie in.
C870/C870D/L870/L870D/L875/L875D Ingeschakeld Schakelt Activering op LAN vanuit de uitgeschakelde stand in. Uitgeschakeld Schakelt Activering op LAN vanuit de uitgeschakelde stand uit (standaardinstelling) Intern LAN Met deze functie wordt het interne LAN in- of uitgeschakeld. Ingeschakeld Schakelt functies voor intern LAN in (standaardinstelling). Uitgeschakeld Schakelt functies voor intern LAN uit. SATA Met deze functie kunt u de instellingen voor SATA bepalen.
C870/C870D/L870/L870D/L875/L875D te tonen. De informatie kan ook worden gebruikt om een diagnose van problemen te stellen indien de computer onderhoud vereist door Toshiba of een door Toshiba erkende servicedienst. Daarnaast kan TOSHIBA deze informatie ook gebruiken voor kwaliteitscontrole en -analyse.
C870/C870D/L870/L870D/L875/L875D Systeemherstel Er is een verborgen partitie op de vaste schijf toegewezen aan de opties voor systeemherstel voor het geval er een probleem optreedt. U kunt ook herstelmedia maken en het systeem herstellen.
C870/C870D/L870/L870D/L875/L875D Zorg dat de computer op volledige energie werkt. Gebruik geen energiebesparingsfuncties. Schrijf niet naar het medium terwijl anti-virussoftware actief is. Wacht tot de viruscontrole is beëindigd en schakel vervolgens de antivirussoftware (en eventuele op de achtergrond uitgevoerde bestandscontroleprogramma's) uit. Gebruik geen hulpprogramma's, ook geen hulpprogramma's voor snelle toegang tot de vaste schijf.
C870/C870D/L870/L870D/L875/L875D De vooraf geïnstalleerde software herstellen met de gemaakte herstelmedia Als de vooraf geïnstalleerde bestanden beschadigd zijn, kunt u de computer in de oorspronkelijke staat herstellen met de herstelmedia die u hebt gemaakt of via het herstelproces op de vaste schijf. Volg de onderstaande stappen als u deze herstelbewerking wilt uitvoeren: Als u het geluid hebt gedempt, schakelt u eerst het geluid in zodat geluiden hoorbaar zijn, voordat u met het herstelproces begint.
C870/C870D/L870/L870D/L875/L875D Als u al een herstelschijf hebt gemaakt, kunt u hiermee de herstelpartitie herstellen. Als u geen herstelschijf hebt gemaakt, neemt u voor hulp contact op met de ondersteuning van TOSHIBA. De vooraf geïnstalleerde software herstellen vanaf het herstelschijfstation Een deel van de totale vasteschijfruimte is geconfigureerd als een verborgen herstelpartitie.
C870/C870D/L870/L870D/L875/L875D 1. 2. Ga hiervoor naar https://backupmedia.toshiba.eu. Volg de aanwijzingen op het scherm. U ontvangt de herstelschijven binnen twee weken nadat u de bestelling hebt geplaatst.
C870/C870D/L870/L870D/L875/L875D Hoofdstuk 5 Stroomvoorziening en spaarstanden De computer kan via de netadapter, de accu-eenheid of de interne accu van stroom worden voorzien. In dit hoofdstuk leest u hoe u deze voedingsbronnen optimaal gebruikt en hoe u de accu oplaadt. Verder worden tips gegeven voor het besparen van accu-energie en krijgt u informatie over de diverse spaarstanden.
C870/C870D/L870/L870D/L875/L875D Ingeschakeld Uitgeschakeld (buiten werking) Netadapter De resterende niet accucapaciteit is aangesloten boven het activeringsniveau voor lage acculading • In werking De resterende accucapaciteit is onder het activeringsniveau voor lage acculading • In werking De accu is leeg.
C870/C870D/L870/L870D/L875/L875D Als de accu tijdens het opladen te heet wordt, wordt het opladen stopgezet en gaat het DC IN-/acculampje uit. Zodra de accu een normale temperatuur heeft bereikt, wordt verder gegaan met opladen, ongeacht of de computer aan of uit staat. Aan/uit-lampje Controleer het aan/uit-lampje om de status van de accu-eenheid te bepalen. Let daarbij op de volgende indicaties: Wit Geeft aan dat de computer van stroom wordt voorzien en is ingeschakeld.
C870/C870D/L870/L870D/L875/L875D U kunt de instellingen van de RTC wijzigingen in het hulpprogramma BIOS Setup. U opent dit door de toets F2 ingedrukt te houden en daarna de computer aan te zetten. BIOS Setup wordt geladen. Raadpleeg hoofdstuk 6, Problemen oplossen, voor meer informatie. Onderhoud en gebruik van de accu Dit gedeelte bevat belangrijke voorzorgsmaatregelen voor een correcte behandeling van de accu.
C870/C870D/L870/L870D/L875/L875D De accu opladen Als de accu bijna leeg is, gaat het DC IN-/acculampje oranje knipperen om aan te geven dat er nog slechts enkele minuten op accustroom kan worden gewerkt. Als u de computer blijft gebruiken terwijl het DC IN-/acculampje knippert, wordt de sluimerstand geactiveerd (zodat u geen gegevens verliest) en wordt de computer automatisch afgesloten. U moet een accu opladen wanneer deze leeg raakt.
C870/C870D/L870/L870D/L875/L875D De accu is te heet of te koud (als de accu erg heet is, wordt deze helemaal niet opgeladen). Om te zorgen dat de accu maximaal wordt opgeladen, dient u deze bij een kamertemperatuur tussen 5°C en 35°C op te laden. De accu is praktisch leeg. Laat de netadapter in dat geval enkele minuten aangesloten; hierna begint het opladen.
C870/C870D/L870/L870D/L875/L875D Slaapstand Sluimerstand Tijd waarna het beeldscherm wordt uitgeschakeld Tijd waarna de vaste schijf wordt uitgeschakeld Hoe vaak en hoe lang u de vaste schijf en externe stations, zoals het optische station, gebruikt. Het oorspronkelijke ladingsniveau van de accu. De wijze waarop u gebruikmaakt van optionele apparaten (zoals een USB-apparaat) die door de accu van stroom worden voorzien.
C870/C870D/L870/L870D/L875/L875D 2. Koppel de netadapter los en schakel de computer in. Als de computer niet wordt ingeschakeld, gaat u naar stap 4. 3. Laat de computer vijf minuten aanstaan op de accu. Als de accueenheid minimaal vijf minuten gebruiksduur heeft, ga dan verder totdat de accu helemaal leeg is. Als echter het DC IN-/acculampje knippert of als er een ander signaal is dat de accu bijna leeg is, ga dan naar stap 4. 4.
C870/C870D/L870/L870D/L875/L875D De accu-eenheid verwijderen Voer de volgende stappen uit om een lege accu te verwijderen. 1. 2. 3. 4. 5. 6. Sla uw werk op. Zet de computer uit. Controleer of het aan/uit-lampje uit is. Verwijder alle op de computer aangesloten kabels en randapparatuur. Sluit het beeldscherm en leg de computer ondersteboven. Schuif de accuvergrendeling naar de ontgrendelde stand ( ). Duw de accu-ontgrendelingsschuif opzij en houd deze vast, zodat de accu vrij komt.
C870/C870D/L870/L870D/L875/L875D Afsluitmodus: de computer zal worden afgesloten zonder gegevens op te slaan. Daarom moet u altijd uw werk opslaan voordat u de computer afsluit. Sluimerstand: de gegevens in het geheugen worden op de vaste schijf opgeslagen. Slaapstand: de gegevens blijven aanwezig in het geheugen van de computer. Raadpleeg de paragrafen De computer inschakelen en De computer uitschakelen in hoofdstuk 1, Aan de slag, voor meer informatie.
C870/C870D/L870/L870D/L875/L875D Hoofdstuk 6 Problemen oplossen TOSHIBA heeft met deze computer een duurzaam product willen maken, maar mochten zich problemen voordoen dan kunt u aan de hand van de procedures in dit hoofdstuk bepalen wat er aan de hand is. Het is raadzaam dat alle gebruikers kennis nemen van dit hoofdstuk omdat als zij weten wat er fout kan gaan, er bepaalde problemen kunnen worden vermeden.
C870/C870D/L870/L870D/L875/L875D Controleer of alle kabels op de juiste manier zijn aangesloten en stevig vastzitten. Loszittende kabels kunnen signaalfouten veroorzaken. Controleer alle verbindingskabels op losse draden en alle connectoren op losse pinnen. Controleer of een eventuele schijf correct is geplaatst Maak uitgebreide notities van uw bevindingen en bewaar deze in een permanent foutenlogboek. Hierdoor kunt u gemakkelijker aan de TOSHIBA-ondersteuning uitleggen wat de problemen zijn.
C870/C870D/L870/L870D/L875/L875D Software De problemen worden wellicht door uw software of schijfje veroorzaakt. Als u een softwarepakket niet kunt laden, is het medium of het programma misschien beschadigd. Probeer in dat geval een andere kopie van de software te laden. Als tijdens het gebruik van een softwarepakket een foutbericht verschijnt, raadpleegt u de softwaredocumentatie. Deze bevat meestal een gedeelte over probleemoplossing of een samenvatting van foutberichten.
C870/C870D/L870/L870D/L875/L875D De computer wordt niet opgestart. Controleer of de netadapter en het netsnoer correct zijn aangesloten. Als u de netadapter gebruikt, controleert u of het stopcontact werkt door er een ander apparaat op aan te sluiten, zoals een lamp. Controleer aan de hand van het aan/uit-lampje of de computer is ingeschakeld. Als het lampje brandt, staat de computer aan. Probeer ook de computer uit en weer in te schakelen.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure De computer wordt automatisch uitgeschakeld. Laat de computer uitstaan totdat deze de kamertemperatuur heeft bereikt. Als u de computer nog steeds niet kunt opstarten nadat deze weer op kamertemperatuur is of als het notebook na opstarten direct wordt uitgeschakeld, neemt u contact op met de TOSHIBA-ondersteuning.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure De accu wordt niet opgeladen terwijl de netadapter is aangesloten Als de accu helemaal ontladen is, begint het oplaadproces niet meteen. Wacht in dat geval enkele minuten voordat u het weer probeert. Wordt de accu nog steeds niet opgeladen, dan controleert u of het stopcontact stroom levert door er een ander apparaat op aan te sluiten. Controleer of de accu warm of koud aanvoelt.
C870/C870D/L870/L870D/L875/L875D RTC (Real Time Clock) Probleem Procedure De BIOS-instelling en systeemdatum/tijd zijn verloren gegaan. De RTC-batterij heeft geen lading meer. U moet de datum en tijd opnieuw instellen via BIOS Setup door de volgende stappen uit te voeren: 1. 2. 3. 4. 5. Houd de toets F2 ingedrukt en zet de computer aan. Het hulpprogramma BIOS Setup wordt geladen. Stel de datum in via het veld System Date. Stel de tijd in via het veld System Time. Druk op F10.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure Er verschijnen vlekken op het beeldscherm. Deze vlekken kunnen zijn veroorzaakt door contact met het toetsenbord of het touchpad bij het sluiten van het scherm. Probeer de vlekken te verwijderen door het scherm voorzichtig af te vegen met een schone, droge doek of, als dit niet lukt, met een goed lcd-reinigingsmiddel. In dit laatste geval moet u altijd de instructies volgen bij de schermreiniger en het scherm goed laten drogen voordat u het sluit.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure U krijgt geen toegang tot een CD/ DVD/Blu-ray Disc™ in het station Controleer of de stationslade goed is gesloten. Duw zachtjes totdat de lade vastklikt. Open de schijflade en controleer of de schijf goed is geplaatst. De schijf moet plat op het ladeoppervlak liggen met het opschrift omhoog. Een vreemd voorwerp in de schijflade kan verhinderen dat de laser de schijf leest. Zorg dat de laser niet wordt geblokkeerd. Verwijder eventuele voorwerpen.
C870/C870D/L870/L870D/L875/L875D Touchpad Probleem Procedure Het touchpad werkt niet. Controleer de apparaatinstellingen. Klik op Start -> Configuratiescherm -> Hardware en geluiden -> Muis. Druk op de sneltoets om het touchpad in te schakelen. Schermaanwijzer reageert niet wanneer het aanwijsapparaat wordt gebruikt In dit geval kan het systeem bezet zijn. Beweeg de muis nogmaals nadat u enkele ogenblikken hebt gewacht. Dubbel aantikken (touchpad) werkt niet.
C870/C870D/L870/L870D/L875/L875D USB-muis Probleem Procedure Schermaanwijzer reageert niet wanneer de muis wordt gebruikt. In dit geval kan het systeem bezet zijn. Beweeg de muis nogmaals nadat u enkele ogenblikken hebt gewacht. Dubbelklikken werkt niet. Probeer in dit geval eerst om de dubbelkliksnelheid te wijzigen in het hulpprogramma voor muisbesturing. Koppel de muis los van de computer, sluit hem weer aan op een vrije USB-poort en zorg ervoor dat hij stevig vast zit. 1. 2. 3.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure USB-apparaat werkt niet. Koppel het USB-apparaat los van de computer, sluit het weer aan op een vrije poort en zorg dat het stevig vast zit. Zorg ervoor dat de benodigde USBstuurprogramma's correct zijn geïnstalleerd. Raadpleeg hiervoor zowel de documentatie van de apparatuur als van het besturingssysteem.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure De accu raakt snel leeg, zelfs nadat ik de computer heb uitgeschakeld. Als de functie Slaapstand en laden is ingeschakeld, neemt de lading van de accu af als de computer in de sluimerstand staat of is uitgeschakeld. Sluit de netadapter aan op de computer of schakelt de functie Slaapstand en laden uit. Externe apparaten die zijn aangesloten op een compatibele poort werken in dit geval niet.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure Hinderlijk geluid hoorbaar. Dit wordt mogelijk veroorzaakt door feedback van de interne microfoon of een externe microfoon die op de computer is aangesloten. Raadpleeg Geluidssysteem in hoofdstuk 3, Basisbeginselen, voor meer informatie. U kunt het volume niet aanpassen terwijl Windows wordt opgestart of afgesloten. Als u het probleem nog steeds niet kunt oplossen, neemt u contact op met de Toshiba-ondersteuning.
C870/C870D/L870/L870D/L875/L875D Probleem Procedure Het scherm blijft leeg. Stel het contrast en de helderheid op de externe monitor bij. Druk op de sneltoets om de beeldschermprioriteit te wijzigen, zodat deze niet alleen op het interne beeldscherm is ingesteld. Controleer of de externe monitor is aangesloten.
C870/C870D/L870/L870D/L875/L875D Draadloos LAN Als u na het uitvoeren van de volgende procedure nog steeds geen toegang tot het LAN hebt, neemt u contact op met de netwerkbeheerder. Raadpleeg hoofdstuk 3, Basisbeginselen, voor meer informatie over draadloze communicatie. Probleem Procedure Kan geen toegang krijgen tot draadloos LAN Controleer of de functie voor draadloze communicatie van de computer is ingeschakeld. Als de problemen aanhouden, neemt u contact op met de LAN-beheerder.
C870/C870D/L870/L870D/L875/L875D Als een probleem optreedt tijdens de uitvoering van softwareprogramma’s, zoekt u in de softwaredocumentatie naar suggesties voor het oplossen van problemen. U kunt ook de afdeling voor technische ondersteuning van het softwarebedrijf bellen voor hulp. Vraag de verkoper of leverancier van wie u de computer en/of de software hebt gekocht om advies. Zij zijn de instantie bij uitstek voor actuele informatie en ondersteuning.
C870/C870D/L870/L870D/L875/L875D Bijlage A Specificaties Deze bijlage biedt een overzicht van de technische kenmerken van de computer. Gewicht en afmetingen Grootte Circa 413 (b) x 268 (d) x 30/34 (h) millimeter (uitstekende delen niet inbegrepen). De fysieke afmetingen hangen af van het gekochte model.
C870/C870D/L870/L870D/L875/L875D Pintoewijzing van poort voor externe RGBmonitor 5 1 15 11 10 6 Pin Signaalnaam Beschrijving I/O 1 CRV Rood videosignaal O 2 CGV Groen videosignaal O 3 CBV Blauw videosignaal O 4 Gereserveerd Gereserveerd 5 GND Aarde 6 GND Aarde 7 GND Aarde 8 GND Aarde 9 +5 V Stroomvoorziening 10 GND Aarde 11 Gereserveerd Gereserveerd 12 SDA Gegevenssignaal I/O 13 HSYNC Signaal voor horizontale synchronisatie O 14 VSYNC Signaal voor ver
C870/C870D/L870/L870D/L875/L875D Bijlage B Netsnoer en connectoren De stekker van het netsnoer moet compatibel zijn met de diverse internationale wandcontactaansluitingen en het netsnoer moet voldoen aan de normen van het land/gebied waarin het wordt gebruikt. Alle snoeren moeten voldoen aan de volgende specificaties: Kabeldikte: Minimaal 0,75 mm2 Stroomsterkte: Minimaal 2,5 ampère Certificeringsinstanties China: CQC VS en Canada: Goedgekeurd door UL en CSA Nee.
C870/C870D/L870/L870D/L875/L875D de configuratie 6-15P (250V) of 5-15P (125V), conform het U.S. National Electrical Code Handbook en de Canadian Electrical Code Part II. In de onderstaande afbeeldingen worden de stekkervormen voor de VS en Canada, het Verenigd Koninkrijk, Australië, Europa en China weergegeven. Gebruikershandleiding V.S.
C870/C870D/L870/L870D/L875/L875D Bijlage C Wettelijke voetnoten Dit hoofdstuk bevat de wettelijke voetnoten die van toepassing zijn op TOSHIBA-computers. Niet-toepasselijke pictogrammen Bepaalde computerchassis zijn ontworpen om alle mogelijke configuraties voor een volledige productserie te huisvesten. Het door u geselecteerde model heeft dus mogelijk niet alle voorzieningen en specificaties die corresponderen met de pictogrammen of schakelaars op het computerchassis.
C870/C870D/L870/L870D/L875/L875D risico van gegevensverlies door altijd back-ups van gegevens te maken. Dit doet u door de gegevens van tijd tot tijd op een extern opslagmedium op te slaan. Voor optimale prestaties dient u uw computer alleen onder de aanbevolen omstandigheden te gebruiken. Lees de aanvullende beperkingen in de productdocumentatie door. Neem voor meer informatie contact op met de TOSHIBA-afdeling voor service en ondersteuning.
C870/C870D/L870/L870D/L875/L875D Gebruiksduur van de accu De gebruiksduur van de accu varieert sterk al naar gelang factoren zoals productmodel, configuratie, toepassingen, energiebeheerinstellingen en gebruikte functies. Bovendien is de gebruiksduur onderhevig aan de natuurlijke prestatievariaties die voortvloeien uit het ontwerp van afzonderlijke onderdelen.
C870/C870D/L870/L870D/L875/L875D en gedeeld systeemgeheugen. De hoeveelheid gedeeld videogeheugen hangt af van de grootte van het systeemgeheugen en andere factoren. Draadloos LAN De verzendsnelheid via het draadloos LAN en het maximale bereik van draadloos LAN kunnen variëren al naar gelang de elektromagnetische omgeving, obstakels, ontwerp en configuratie van toegangspunten, clientontwerp en software-/hardwareconfiguratie. De werkelijke verzendsnelheid zal lager zijn dan de theoretische maximumsnelheid.
C870/C870D/L870/L870D/L875/L875D Bijlage D Informatie voor draadloze apparaten Onderlinge samenwerking tussen draadloze LAN's Het draadloze LAN is compatibel met LAN-systemen met de Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing (OFDM) radiotechnologie en voldoet aan de volgende normen: De IEEE 802.11-standaard voor draadloze LAN's (revisie a/b/g/n of b/ g/n), zoals gedefinieerd en goedgekeurd door het Institute of Electrical and Electronics Engineers.
C870/C870D/L870/L870D/L875/L875D Als u dergelijke problemen ondervindt, schakelt u onmiddellijk het Bluetooth- of draadloos LAN-apparaat uit. Ga naar http://www.pc.support.global.toshiba.com als u vragen hebt over het gebruik van de draadloos LAN- of Bluetooth-kaart van TOSHIBA. In Europa gaat u naar http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm Uw Bluetooth-product is niet compatibel met apparaten die Bluetooth versie 1.0B gebruiken.
C870/C870D/L870/L870D/L875/L875D Europa Beperkingen voor gebruik van de frequenties tussen 2400,0-2483,5 MHz in Europa Frankrijk: Gebruik buitenshuis is beperkt tot 10 m W.e.i.r.p. binnen de band van 2454-2483,5 MHz Gebruik voor militaire radioplaatsbepaling. De afgelopen jaren is er voortdurend aan gewerkt om de 2,4 GHz-band aan te passen voor de huidige versoepelde regelgeving. Volledige implementatie staat gepland voor 2012.
C870/C870D/L870/L870D/L875/L875D Russische Federatie: Beperkt e.i.r.p 100 mW. Gebruik is alleen toegestaan binnenshuis, in afgesloten industriële gebieden en opslagplaatsen en aan boord van vliegtuigen. 1. 2. Gebruik is toegestaan voor lokale netwerken voor servicecommunicatie tussen luchtvaartpersoneel aanboord van een vliegtuig op het vliegveld en tijdens alle vluchtstadia.
C870/C870D/L870/L870D/L875/L875D Russische Federatie: Beperkt e.i.r.p 100 mW. Gebruik is alleen toegestaan binnenshuis, in afgesloten industriële gebieden en opslagplaatsen en aan boord van vliegtuigen. 1. 2. Gebruik is toegestaan voor lokale netwerken voor servicecommunicatie tussen luchtvaartpersoneel aanboord van een vliegtuig op het vliegveld en tijdens alle vluchtstadia.
C870/C870D/L870/L870D/L875/L875D Raadpleeg het gedeelte met FCC-informatie voor meer informatie. Let op: blootstelling aan HF-straling Het uitgestraalde uitgangsvermogen van het draadloze apparaat ligt ruimschoots onder de FCC-limieten voor blootstelling aan HF-straling. Niettemin dient het draadloze apparaat zodanig te worden gebruikt dat fysiek contact tijdens normaal gebruik tot een minimum beperkt blijft.
C870/C870D/L870/L870D/L875/L875D Gebruik van deze apparatuur in Japan In Japan wordt de frequentiebandbreedte van mobiele objectidentificatiesystemen (gelicentieerd radiostation en gespecificeerd radiostation met laag vermogen) overlapt door de frequentiebandbreedte tussen 2.400 en 2.483,5 MHz voor tweedegeneratiesystemen voor gegevenscommunicatie met laag vermogen zoals deze apparatuur. 1.
C870/C870D/L870/L870D/L875/L875D 1. 2. 3. 4. 2.4: Deze apparatuur gebruikt een frequentie van 2,4 GHz. FH: Deze apparatuur gebruikt FH-SS-modulatie. 1: Het storingsbereik van deze apparatuur is minder dan 10 m. : Deze apparatuur gebruikt een frequentiebandbreedte van 2.400 MHz tot 2.483,5 MHz. Het is onmogelijk de bandbreedte van identificatiesystemen voor mobiele objecten te omzeilen. 4. Over de JEITA Draadloos LAN op 5 GHz ondersteunt het kanaal W52/W53/W56.
C870/C870D/L870/L870D/L875/L875D Open of wijzig het apparaat niet. Installeer de draadloze LAN-module waarmee het apparaat is uitgerust, niet in een ander apparaat. Radiogoedkeuringen voor draadloze apparaten Goedgekeurde landen/gebieden voor de Realtek® RTL8188SE 802.11n PCI-E NIC b/g/n draadloos LAN Deze apparatuur is goedgekeurd volgens de radionormen van de landen/ gebieden in de onderstaande tabel. Gebruik deze apparatuur niet in de landen/gebieden die niet in de onderstaande tabel worden vermeld.
C870/C870D/L870/L870D/L875/L875D Maleisië Malta Mexico Monaco Moldavië Montenegro Marokko Mozambique Namibië Nepal Nederland Nieuw-Zeeland Nicaragua Nigeria Noorwegen Oman Pakistan Papoea-NieuwGuinea Paraguay Peru Filipijnen Polen Portugal Qatar Roemenië Rusland Rwanda Saint Vincent en de Grenadines Saudi-Arabië Senegal Servië Singapore Slowakije Slovenië Zuid-Afrika Zuid-Korea Spanje Zweden Zwitserland Taiwan Thailand Trinidad en Tobago Tunesië Turkije Uganda O
C870/C870D/L870/L870D/L875/L875D Argentinië Albanië Australië Oostenrijk Azerbeidzjan Bahrein België Bolivia Bosnië en Herzegovina Brazilië Bulgarije Cambodja Canada Chili Costa Rica Kroatië Cyprus Tsjechië Denemarken Egypte Estland Finland Frankrijk Duitsland Ghana Griekenland Hong Kong Hongarije IJsland India Indonesië Ierland Israël Italië Jamaica Japan Jordanië Kazachstan Kenia Koeweit Kirgizië Letland Libanon Liechtenstein Litouwen Luxemburg Maleisië Malt
C870/C870D/L870/L870D/L875/L875D Gebruik deze apparatuur niet in de landen/gebieden die niet in de onderstaande tabel worden vermeld. Een ad-hoc modus is niet beschikbaar in de 802.11n-modus. Beschikbare kanalen voor peer-to-peer-verbinding in de ad-hoc modus: Ch1-Ch11. Verbinding met een toegangspunt in de infrastructuurmodus: Ch1Ch13.
C870/C870D/L870/L870D/L875/L875D Venezuela Vietnam Goedgekeurde landen/gebieden voor de Atheros HB125 802.11b/g/n draadloos LAN Deze apparatuur is goedgekeurd volgens de radionormen van de landen/ gebieden in de onderstaande tabel. Gebruik deze apparatuur niet in de landen/gebieden die niet in de onderstaande tabel worden vermeld. Een ad-hoc modus is niet beschikbaar in de 802.11n-modus. Beschikbare kanalen voor peer-to-peer-verbinding in de ad-hoc modus: Ch1-Ch11.
C870/C870D/L870/L870D/L875/L875D Servië Singapore Slowakije Slovenië Zuid-Afrika Zuid-Korea Spanje Zweden Zwitserland Taiwan Thailand Oekraïne Verenigde Arabische Emiraten Verenigd Koninkrijk Verenigde Staten Uruguay Venezuela Vietnam Gebruikershandleiding D-14
C870/C870D/L870/L870D/L875/L875D Index A C Aanwijsapparaat touchpad 2-9, 3-1 touchpadbesturingsknoppen 3-1 Controlelijst van apparatuur 1-1 D DC IN lampje 2-1 Accu capaciteit controleren 5-6 energiebesparingsmodus 4-6 gebruiksduur verlengen 5-7 typen 5-3 DC IN-/acculampje 5-2 Documentatielijst 1-1 Draadloos LAN problemen 6-16 Accu-eenheid vervangen 5-8 Draadloze communicatie 3-26 B Dubbel aanwijsapparaat touchpad 6-10 Batterij Real Time Clock 5-3 RTC-batterij 2-10 Beeldscherm automatisch uitschak
C870/C870D/L870/L870D/L875/L875D plaatsen 3-36 verwijderen 3-39 M MultiMediaCard verwijderen 3-35 Geheugenmediasleuf 3-32 Geheugenmedium plaatsen 3-34 verwijderen 3-35 N Netadapter aansluiten 1-3 extra 3-44 gelijkstroomingang (19 V) 2-2 Geluidssysteem problemen 6-13 Grafische controller 2-11 H O HDMI-uit-poort 2-4 Opnieuw opstarten van de computer 1-10 Herstelmedia 4-20, 4-21 Herstelschijfstation 4-21 HW Setup Algemeen 4-11 beeldscherm 4-12 LAN 4-15 Opstarten 4-13 SATA 4-16 starten 4-11 toetsenbord
C870/C870D/L870/L870D/L875/L875D USB-apparaat 6-11 USB-muis 6-11 vaste schijf 6-8 voeding 6-4 TOSHIBA PC diagnoseprogramma 4-1 U R USB-apparaat problemen 6-11 Reinigen van de computer 3-46 S V Vaste schijf automatisch uitschakelen 4-5 SD/SDHC/SDXC-kaart formatteren 3-33 opmerking 3-33 Verplaatsen van de computer 3-47 Slaapstand instellen 1-7 systeem automatisch in 4-6 Video-RAM 2-11 Videomodus 3-46 Voeding afsluitmodus 1-7 in-/uitschakelen via LCD 4-6 inschakelen 1-6 omstandigheden 5-1 scherm aan
C870/C870D/L870/L870D/L875/L875D Webcam 2-8 Gebruikershandleiding Index-4