User guide

3-6 User’s Manual
Getting Started
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to unlatch
the display panel.
Opening the display
2. Lift the panel up and adjust it to the best viewing angle for you.
Turning on the power
This section describes how to turn on the power.
1. If a USB Floppy Disk drive is connected, make sure the drive is empty.
If a diskette is in the drive, press the eject button to remove it.
2. Press the Power button.
Turning on the power
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Starting up for the first
time in this chapter.