Benutzerhandbuch Z30/Z40-B
Inhaltsverzeichnis Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit Copyright, Haftungsausschluss und Marken ..................................... 1-1 Zulassungsbestimmungen ................................................................... 1-2 Videostandardhinweis .......................................................................... 1-9 ENERGY STAR® Programm ............................................................... 1-10 Entsorgung des Computers und des Akkus .................
Soundsystem und Videomodus ......................................................... 4-33 Kapitel 5 Utilitys und erweiterte Verwendung Utilitys und Anwendungen ................................................................... 5-1 Sonderfunktionen .................................................................................. 5-3 Verwenden des TOSHIBA Schlaf-Dienstprogramms ......................... 5-6 TOSHIBA Passwort-Dienstprogramm .................................................
Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit In diesem Kapitel werden rechtliche sowie zulassungs- und sicherheitsrelevante Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Copyright, Haftungsausschluss und Marken Copyright © 2014 TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig.
Marken Intel ist eine Marke oder eingetragene Marke der Intel Corporation. Windows, Microsoft und das Windows-Logo sind eingetragene Marken der Microsoft Corporation. Die Bluetooth®-Marke und -Logos sind eingetragene Marken im Besitz von Bluetooth SIG, Inc., und die Verwendung dieser Marken durch die Toshiba Corporation und deren Tochterunternehmen erfolgt unter Lizenz.
Vergrößern Sie den Abstand zwischen dem Gerät und dem Empfänger. Schließen Sie das Gerät und den Empfänger an unterschiedliche Stromkreise an. Wenden Sie sich an den Händler oder an einen erfahrenen Rundfunk-/Fernsehtechniker. An dieses Gerät dürfen nur Peripheriegeräte angeschlossen werden, die den FCC-Bestimmungen der Klasse B entsprechen. Beim Betrieb mit nicht konformen oder nicht von TOSHIBA empfohlenen Peripheriegeräten kommt es wahrscheinlich zu Störungen des Rundfunk- und Fernsehempfangs.
Erklärung zur EU-Konformität Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit den entsprechenden europäischen Richtlinien. Verantwortlich für die CE-Kennzeichnung ist die TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Deutschland. Den vollständigen und offiziellen Text der EU-Konformitätserklärung finden Sie auf der TOSHIBA-Website http://epps.toshiba-teg.com im Internet.
Industrieumgebungen (z. B. Bereiche, in denen mit einer Netzspannung von 380 V und drei Phasen gearbeitet wird). Medizinische Einrichtungen Fahrzeuge Flugzeuge Für alle eventuellen Folgen, die aufgrund der Verwendung dieses Produkts in nicht geeigneten Arbeitsumgebungen entstehen könnten, ist TOSHIBA nicht verantwortlich.
Die folgenden Informationen gelten nur für die Mitgliedstaaten der EU: Entsorgung von Produkten Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Produkte getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Eingebaute Batterien und Akkus können zusammen mit dem Produkt entsorgt werden. Sie werden in den Recyclingzentralen entnommen und gesondert entsorgt. Der schwarze Balken zeigt an, dass das Produkt nach dem 13. August 2005 auf den Markt gebracht wurde.
Entsorgung von Batterien und/oder Akkus Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Batterien und/oder Akkus getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Wenn die Batterie oder der Akku mehr als die in der europäischen Batterie-Richtlinie spezifizierten Wert für Blei (Pb), Quecksilber (Hg) und/oder Kadmium (Cd) enthält, werden die chemischen Symbole für Blei (Pb), Quecksilber (Hg) und/oder Kadmium unter dem Symbol mit der durchgestrichenen Mülltonne angezeigt.
Die folgenden Informationen gelten nur für die Türkei: Entsorgung von Produkten: Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass dieses Produkt getrennt vom Hausmüll gesammelt und entsorgt werden muss. Am Ende seiner Lebensdauer sollte das Produkt zum Schutz der Umwelt und der Gesundheit beim nächsten Recyclingcenter oder Wertstoffhof abgegeben werden.
Diese Symbole sind bei Ihrem Modell möglicherweise nicht vorhanden; dies richtet sich nach dem Land/Gebiet, in dem Sie das Gerät gekauft haben. Videostandardhinweis DIESES PRODUKT WIRD FÜR PERSÖNLICHEN, NICHTKOMMERZIELLEN GEBRAUCH UNTER DER AVC-, VC1- UND MPEG-4PATENTPORTFOLIOLIZENZ AN ENDKONSUMENTEN LIZENZIERT. HIERDURCH IST ES DIESEN MÖGLICH (I) VIDEOS UNTER EINHALTUNG DER OBEN GENANNTEN STANDARDS („VIDEO“) ZU CODIEREN BZW.
ENERGY STAR® Programm Ihr Computermodell erfüllt möglicherweise die ENERGY STAR®-Bestimmungen. Falls dies auf Ihr Modell zutrifft, ist es mit dem Energy Star-Logo gekennzeichnet, und es gelten die folgenden Informationen. TOSHIBA ist Partner im ENERGY STAR Program und hat diesen Computer so entwickelt, dass die ENERGY STARRichtlinien für die Energieeffizienz eingehalten werden.
Allgemeine Vorsichtsmaßnahmen TOSHIBA-Computer gewährleisten ein Optimum an Sicherheit, verringern die gesundheitliche Belastung durch Überanstrengung und minimieren die Risiken beim mobilen Einsatz der Geräte. Dennoch können Sie durch Einhaltung einiger Vorsichtsmaßnahmen dazu beitragen, gesundheitliche Beeinträchtigungen oder Schäden am Computer zu vermeiden. Lesen Sie deshalb unbedingt die nachfolgenden allgemeinen Hinweise und die mit „Vorsicht“ markierten Abschnitte im Handbuch.
Rasche Temperaturwechsel oder Veränderungen der Luftfeuchtigkeit und deren Verursacher (z. B. Lüftungsschlitze von Klimaanlagen oder Heizungen). Extreme Hitze, Kälte oder Luftfeuchtigkeit. Flüssigkeiten und korrosive Chemikalien Verletzungen durch Überlastung Lesen Sie das Handbuch für sicheres und angenehmes Arbeiten aufmerksam durch. Es enthält Informationen zur Vermeidung von Überlastungserscheinungen an Ihren Handgelenken durch längere Verwendung der Tastatur.
Verschütten Sie keine Flüssigkeit über den Computer. Sollte der Computer nass werden, schalten Sie ihn sofort aus, und lassen Sie ihn vollständig trocknen. In einem solchen Fall sollten Sie den Computer durch einen autorisierten Service-Anbieter untersuchen lassen, um den Umfang möglicher Schäden zu beurteilen. Reinigen Sie die Plastikteile des Computers mit einem Tuch, das Sie leicht mit Wasser angefeuchtet haben.
Mobiltelefone Die Verwendung von Mobiltelefonen kann zu Konflikten mit dem Audiosystem führen. Der Betrieb des Computers wird dadurch nicht beeinträchtigt, dennoch sollte ein Mindestabstand von 30 cm zwischen dem Computer und einem Mobiltelefon, das gerade verwendet wird, eingehalten werden. Handbuch für sicheres und angenehmes Arbeiten Alle wichtigen Informationen zur sicheren und richtigen Verwendung des Computers finden Sie im mitgelieferten Handbuch für sicheres und angenehmes Arbeiten.
Kapitel 2 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde, funktionieren einige der in diesem Handbuch beschriebenen Merkmale möglicherweise nicht korrekt. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
Klicken Tippen Sie einmal auf das Touchpad oder klicken Sie einmal mit der linken TouchpadKlicktaste. Klicken Sie einmal mit der linken Maustaste. Tippen Sie einmal auf den Touchscreen (nur bei Modellen mit Touchscreen). Rechtsklick Tippen Sie mit zwei Fingern gleichzeitig auf das Touchpad oder klicken Sie einmal mit der rechten Touchpad-Klicktaste. Klicken Sie einmal mit der rechten Maustaste. Berühren und halten Sie den Touchscreen (nur bei Modellen mit Touchscreen).
Erstmalige Verwendung des Computers Lesen Sie auch das mitgelieferte Handbuch für sicheres und angenehmes Arbeiten, um sich über die sichere und richtige Verwendung des Computers zu informieren. Die Richtlinien in diesem Handbuch sollen Ihnen helfen, bequemer und produktiver am Notebook zu arbeiten. Wenn Sie sich an die Empfehlungen in dem Handbuch halten, können Sie das Risiko schmerzhafter gesundheitlicher Schädigungen an Händen, Armen, Schultern und Nacken mindern.
Verwenden Sie stets nur den TOSHIBA-Netzadapter, den Sie mit dem Computer erhalten haben, oder von TOSHIBA empfohlene Netzadapter, um Feuergefahr und eine Beschädigung des Computer zu vermeiden. Bei Verwendung nicht kompatibler Netzadapter könnte es zu einem Brand oder zu einer sonstigen Beschädigung des Computers sowie ernsthaften Verletzungen kommen. TOSHIBA übernimmt keine Haftung für Schäden, die durch die Verwendung eines inkompatiblen Netzadapters entstehen.
Abbildung 2-1 Netzkabel an den Netzadapter (mit 2 Kontakten) anschließen Abbildung 2-2 Netzkabel an den Netzadapter (mit 3 Kontakten) anschließen Je nach Modell wird der Computer entweder mit einem 2-Kontakt-Stecker/Kabel oder mit einem 3-Kontakt-Stecker/-Kabel geliefert. 2. 3. Stecken Sie den Gleichstromausgangsstecker des Netzadapters in den 19-V-Gleichstromeingang (DC IN) des Computers. Schließen Sie das Netzkabel an eine Steckdose an. Die Anzeige DC IN/Akku leuchtet.
Öffnen des Bildschirms Die Neigung des Bildschirms ist in einem großen Bereich einstellbar und ermöglicht so ein Optimum an Lesbarkeit und Komfort. Halten Sie die Handballenauflage mit einer Handfest, damit der Computer nicht angehoben wird, während Sie den Bildschirm langsam aufklappen. Stellen Sie einen für Sie angenehmen Betrachtungswinkel ein, der optimale Klarheit bietet. Abbildung 2-5 Bildschirm öffnen (Z30-B) 1 1. Bildschirm Darstellung kann je nach Modell abweichen.
Einschalten In diesem Abschnitt wird das Einschalten des Geräts beschrieben. Die Anzeige Power zeigt den Status an. Weitere Informationen finden Sie unter Beschreibung der Stromversorgungsbedingungen. Nachdem Sie den Computer zum ersten Mal eingeschaltet haben, dürfen Sie ihn erst dann wieder ausschalten, wenn das Betriebssystem vollständig eingerichtet und gestartet wurde. Die Lautstärke kann während des Windows-Setups nicht eingestellt werden.
Ausschalten Der Computer kann in einem von drei Modi ausgeschaltet werden: Beenden (Boot), Energiesparmodus oder Ruhezustand. Beenden-Modus Wenn Sie den Computer im Beenden-Modus ausschalten, werden keine Daten gespeichert und es wird beim nächsten Start der Hauptbildschirm des Betriebssystems angezeigt. 1. 2. Sichern Sie eingegebene Daten im internen Speicherlaufwerk oder auf einem anderen Speichermedium.
Energiesparmodus Wenn Sie Ihre Arbeit unterbrechen müssen, können Sie den Computer ausschalten, ohne die Software zu beenden, indem Sie den Computer in den Energiesparmodus versetzen. In diesem Modus bleiben die Daten im Arbeitsspeicher des Computers erhalten. Wenn Sie den Computer wieder einschalten, können Sie direkt dort mit der Arbeit fortfahren, wo Sie sie unterbrochen haben.
Wenn Sie den hybriden Standbymodus verwenden möchten, konfigurieren Sie diese Funktion in den Energieoptionen. Vorteile des Energiesparmodus Der Energiesparmodus bietet die folgenden Vorteile: Die zuletzt verwendete Arbeitsumgebung wird schneller als im Ruhezustand wiederhergestellt. Sie sparen Energie, indem das System heruntergefahren wird, wenn während eines bestimmten Zeitraums, dessen Länge mit der Funktion „System-Energiesparmodus“ festgelegt wird, keine Eingaben oder Hardwarezugriffe erfolgen.
nächsten Einschalten des Geräts der zuletzt verwendete Zustand wiederhergestellt wird. Beachten Sie, dass die Ruhezustandsfunktion nicht den Status angeschlossener Peripheriegeräte speichert. Speichern Sie Ihre Arbeit. Wird der Ruhezustand aktiviert, speichert der Computer den Inhalt des Arbeitsspeichers im internen Speicherlaufwerk. Aus Sicherheitsgründen sollten Sie die Daten jedoch auch selbst speichern. Wenn Sie den Netzadapter trennen, bevor der Speichervorgang abgeschlossen ist, gehen Daten verloren.
4. Klicken Sie auf Änderungen speichern. Datenspeicherung im Ruhezustand Wenn Sie den Computer im Ruhezustand ausschalten, benötigt er einen Moment, um die aktuellen Daten aus dem Arbeitsspeicher im internen Speicherlaufwerk zu speichern. Nachdem Sie den Computer ausgeschaltet haben und der Inhalt des Arbeitsspeichers im internen Speicherlaufwerk gespeichert wurde, schalten Sie die angeschlossenen Peripheriegeräte aus. Schalten Sie den Computer oder die Peripheriegeräte nicht sofort wieder ein.
Kapitel 3 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie im Abschnitt Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
Anzeige „DC IN/Akku“ Die Anzeige DC IN/Akku informiert Sie über den Zustand des Gleichstromeingangs und den Akkuladezustand. Weiß bedeutet, dass der Akku voll aufgeladen ist und der Computer über den Netzadapter mit Strom versorgt wird. Weitere Informationen zu dieser Funktion finden Sie unter Beschreibung der Stromversorgungsbedingungen. Anzeige „Power“ Die Anzeige Power leuchtet normalerweise weiß, wenn der Computer eingeschaltet ist.
Abbildung 3-2 Die linke Seite des Computers (Z30-B) 1 2 3 4 1. 19-V-Gleichstromeingang (DC IN) 2. Anschluss für einen externen RGBMonitor 3. HDMI-Ausgang* 5 6 4. USB-Anschluss (USB 3.0) 5. Kopfhörer-/Mikrofonbuchse 6. Smartcard-Steckplatz* * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. 19-V-Gleichstromeingang (DC IN) Der Netzadapter wird an diese Buchse angeschlossen, um den Computer mit Strom zu versorgen und die internen Batterien aufzuladen.
Beachten Sie, dass keine Garantie für den einwandfreien Betrieb sämtlicher Funktionen aller USB-Geräte übernommen werden kann. Einige Funktionen bestimmter Geräte funktionieren möglicherweise nicht korrekt. Bevor Sie ein USB-Gerät vom USB-Anschluss des Computers trennen, klicken Sie in der Windows-Taskleiste auf das Symbol Hardware sicher entfernen und Medium auswerfen. Wählen Sie dann das USB-Gerät, das Sie entfernen möchten. Achten Sie darauf, dass keine Metallgegenstände, z. B.
Speichermediensteckplatz In diesen Steckplatz können Sie eine Karte des folgenden Typs einsetzen: SD™/SDHC™/ SDXC™-Speicherkarte, miniSD™/microSD™ Card und MultiMediaCard™. Weitere Informationen finden Sie im Abschnitt Speichermedien. Achten Sie darauf, dass keine Metallgegenstände, z. B. Schrauben, Heftklammern und Büroklammern in den Speichermediensteckplatz gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte.
LAN-Buchse Über diese Buchse können Sie den Computer an ein LAN anschließen. Die in den Computer integrierte LAN-Schnittstelle unterstützt Ethernet LAN (10 Mbit/s, 10BASE-T), Fast Ethernet LAN (100 Mbit/s, 100BASE-TX) oder Gigabit Ethernet LAN (1000 Mbit/s, 1000BASE-T). Nähere Informationen finden Sie unter Grundlagen der Bedienung. Schließen Sie nur ein LAN-Kabel an die LAN-Buchse an. Wenn Sie ein anderes Kabel anschließen, könnte es zu Schäden oder Fehlfunktionen kommen.
Unterseite (Z30-B) Die folgenden Abbildungen zeigen die Unterseite des Computers. Achten Sie darauf, dass der Bildschirm geschlossen ist, bevor Sie den Computer herumdrehen, um Schäden zu vermeiden. Abbildung 3-5 Die Unterseite des Computers (Z30-B) 1 1. Lüftungsschlitze 1 2 2. Dockinganschluss* * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors.
Abbildung 3-6 Die Vorderseite des Computers mit geöffnetem Bildschirm (Z30-B) 3 1 2 4 2 5 6 8 9 6 7 10 10 11 12 13 14 16 1. Antennen für die drahtlose Kommunikation (nicht abgebildet)* 2. Mikrofon* 3. Webcam-LED* 4. Webcam* 5. Bildschirm 6. Bildschirmscharniere 7. Tastatur 8. Ein/Aus-Taste 9. AccuPoint* 14 17 18 15 10. AccuPoint-Klicktasten* 11. Touchpad Ein/Aus-Anzeige 12. TOSHIBA eco-Anzeige 13. Touchpad 14. Touchpad-Klicktasten 15. Fingerabdrucksensor* 16. Anzeige „DC IN/Akku“ 17.
Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen aufnehmen. Weitere Informationen dazu finden Sie im Abschnitt Audiosystem und Videomodus. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist. Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können. Sie können es für VideoChats oder Videokonferenzen einsetzen, wenn Sie ein Kommunikationstool verwenden.
Ein/Aus-Taste Drücken Sie auf diese Taste, um den Computer ein- oder auszuschalten. AccuPoint Dieses Zeigegerät in der Mitte der Tastatur dient zur Steuerung des Bildschirmzeigers. Einige Modelle sind mit einem AccuPoint ausgestattet. AccuPointKlicktasten Mit den vor der Tastatur gelegenen Tasten können Sie Menüeinträge auswählen oder Text und Grafik bearbeiten, nachdem Sie das gewünschte Objekt mit dem Bildschirmzeiger markiert haben. Nur Modelle mit AccuPoint verfügen auch über AccuPoint-Klicktasten.
Anzeige „DC IN/Akku“ Die Anzeige DC IN/Akku informiert Sie über den Zustand des Gleichstromeingangs und den Akkuladezustand. Weiß bedeutet, dass der Akku voll aufgeladen ist und der Computer über den Netzadapter mit Strom versorgt wird. Weitere Informationen zu dieser Funktion finden Sie unter Beschreibung der Stromversorgungsbedingungen. Anzeige „Power“ Die Anzeige Power leuchtet normalerweise weiß, wenn der Computer eingeschaltet ist.
Anzeige „DC IN/Akku“ Die Anzeige DC IN/Akku informiert Sie über den Zustand des Gleichstromeingangs und den Akkuladezustand. Weiß bedeutet, dass der Akku voll aufgeladen ist und der Computer über den Netzadapter mit Strom versorgt wird. Weitere Informationen zu dieser Funktion finden Sie unter Beschreibung der Stromversorgungsbedingungen. Anzeige „Power“ Die Anzeige Power leuchtet normalerweise weiß, wenn der Computer eingeschaltet ist.
Abbildung 3-8 Die linke Seite des Computers (Z40-B) 1 2 1. Lüftungsschlitze 2. Anschluss für einen externen RGBMonitor 3. USB-Anschluss (USB 3.0) 3 4 5 6 4. HDMI-Ausgang* 5. SIM-Kartensteckplatz* 6. Speichermediensteckplatz * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Anschluss für einen externen RGBMonitor Dieser Anschluss ist ein 15-poliger, analoger RGB-Anschluss.
Fremdkörper können einen Kurzschluss verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte. HDMI-Ausgang An den HDMI-Ausgang können Sie ein HDMIKabel (Typ A) anschließen. Einige Modelle sind mit einem HDMI-Ausgang ausgestattet. SIM-Kartensteckplatz Dieser Steckplatz kann eine SIM-Karte aufnehmen, die Ihnen Hochgeschwindigkeitszugang zum Internet, zu Ihrem Unternehmensintranet und zu Ihren EMails ermöglicht, wenn Sie nicht im Büro sind.
Smartcard-Steckplatz In diesen Steckplatz können Sie ein SmartcardGerät einbauen. Einige Modelle sind mit einem SmartcardSteckplatz ausgestattet. Kopfhörer-/ Mikrofonbuchse An die Mini-Kopfhörer-/Mikrofonbuchse (3,5 mm) können Sie ein Monomikrofon oder Stereokopfhörer anschließen. USB-Anschlüsse (USB 3.0) Zwei USB-Anschlüsse, die dem USB 3.0Standard entsprechen, befinden sich auf der rechten Seite des Computers. Der USB-3.0-Anschluss entspricht dem Standard USB 3.0 und ist mit USB-2.
Schließen Sie nur ein LAN-Kabel an die LAN-Buchse an. Wenn Sie ein anderes Kabel anschließen, könnte es zu Schäden oder Fehlfunktionen kommen. 19-V-Gleichstromeingang (DC IN) Der Netzadapter wird an diese Buchse angeschlossen, um den Computer mit Strom zu versorgen und die internen Batterien aufzuladen. Verwenden Sie nur den Netzadapter, den Sie beim Kauf des Computers mit dem Gerät erhalten haben, oder ein identisches Modell.
Abbildung 3-11 Die Unterseite des Computers (Z40-B) 2 1. Lüftungsschlitze 1 2. Dockinganschluss* * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Dockinganschluss An diesen Anschluss können Sie einen optional erhältlichen TOSHIBA Hi-Speed Port Replicator III 180W/120W anschließen, der unter TOSHIBA Hi-Speed Port Replicator III 180W/120W beschrieben wird.
Abbildung 3-12 Die Vorderseite des Computers mit geöffnetem Bildschirm (Z40-B) 2 3 4 2 1 5 6 9 6 8 10 10 11 12 7 13 14 16 14 17 18 15 1. Antennen für die drahtlose Kommunikation (nicht abgebildet)* 2. Mikrofon* 3. Webcam-LED* 4. Webcam* 5. Bildschirm 6. Bildschirmscharniere 7. Tastatur 8. Ein/Aus-Taste 9. AccuPoint 10. AccuPoint-Klicktasten 11. Touchpad Ein/Aus-Anzeige 12. TOSHIBA eco-Anzeige 13. Touchpad 14. Touchpad-Klicktasten 15. Fingerabdrucksensor* 16. Anzeige „DC IN/Akku“ 17.
Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen aufnehmen. Weitere Informationen dazu finden Sie im Abschnitt Audiosystem und Videomodus. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist. Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können. Sie können es für VideoChats oder Videokonferenzen einsetzen, wenn Sie ein Kommunikationstool verwenden.
AccuPoint Dieses Zeigegerät in der Mitte der Tastatur dient zur Steuerung des Bildschirmzeigers. AccuPointKlicktasten Mit den vor der Tastatur gelegenen Tasten können Sie Menüeinträge auswählen oder Text und Grafik bearbeiten, nachdem Sie das gewünschte Objekt mit dem Bildschirmzeiger markiert haben. Touchpad Ein/AusAnzeige Doppeltippen Sie auf diese Anzeige, um das Touchpad zu aktivieren bzw. zu deaktivieren.
Anzeige „DC IN/Akku“ Die Anzeige DC IN/Akku informiert Sie über den Zustand des Gleichstromeingangs und den Akkuladezustand. Weiß bedeutet, dass der Akku voll aufgeladen ist und der Computer über den Netzadapter mit Strom versorgt wird. Weitere Informationen zu dieser Funktion finden Sie unter Beschreibung der Stromversorgungsbedingungen. Anzeige „Power“ Die Anzeige Power leuchtet normalerweise weiß, wenn der Computer eingeschaltet ist.
CPU Der Prozessortyp variiert je nach Modell. Um festzustellen, mit welchem Prozessortyp Ihr Computer ausgestattet ist, öffnen Sie das TOSHIBA PC-Diagnose-Tool, indem Sie auf Folgendes klicken: Start -> Alle Programme -> TOSHIBA -> Support & Wiederherstellung -> PC-Diagnose-Tool. Rechtliche Hinweise (CPU) Weitere Informationen zur CPU finden Sie im Abschnitt Rechtliche Hinweise. Internes Speicherlaufwerk Die Kapazität des internen Speicherlaufwerks ist modellabhängig.
Video-RAM Der Speicher im Grafikadapter des Computers, der zum Speichern des in einer Bitmapanzeige angezeigten Bildes verwendet wird. Die Größe des verfügbaren Video-RAM ist vom Arbeitsspeicher des Computers abhängig. Klicken Sie auf Start -> Systemsteuerung -> Darstellung und Anpassung -> Anzeige -> Auflösung anpassen. Sie können die Größe des Video-RAM überprüfen, indem Sie im Fenster „Bildschirmauflösung“ auf die Schaltfläche Erweiterte Einstellungen klicken.
Wenn das Programm immer noch nicht normal ausgeführt wird, stellen Sie die Standardeinstellungen für den bevorzugten Grafikprozessor wieder her. Bei einigen Video-Wiedergabeprogrammen können Sie für die Videowiedergabe den bevorzugten Grafikprozessor auf der Registerkarte „Programmeinstellungen“ nicht zu einer anderen Einstellung als „Integrierte Grafik“ ändern.
3. Klicken Sie auf Übernehmen. Wenn Sie diese Funktion aktivieren möchten, klicken Sie unter DisplayStromspartechnologie auf Aktivieren. Beschreibung der Stromversorgungsbedingungen Die Einsatzfähigkeit des Computers und der Status des Akkus richten sich nach den Stromversorgungsbedingungen, d. h. danach, ob ein Netzadapter angeschlossen ist, und in welchem Ladezustand sich der Akku befindet.
Gelb blinkend Der Computer befindet sich im Energiesparmodus und wird ausreichend mit Strom versorgt (Netzadapter oder Akku), um diesen Zustand beizubehalten. Leuchtet nicht Unter allen sonstigen Bedingungen leuchtet die Anzeige nicht.
Kapitel 4 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchscreens Einige Modelle sind mit einem Touchscreen ausgestattet. Sie können Symbole, Schaltflächen, Menüpunkte, die Bildschirmtastatur und andere Elemente auf dem Touchscreen mit dem Finger bedienen. Tippen Tippen Sie einfach mit dem Finger auf den Touchscreen, um Aktionen für die Elemente auf dem Bildschirm auszuführen.
Tippen Tippen Sie einfach mit dem Finger auf das Touchpad, um Aktionen für die Elemente auf dem Bildschirm auszuführen. (Ähnlich wie Linksklick) Finger zusammenführen oder spreizen Setzen Sie zwei Finger auf das Touchpad und bewegen Sie sie aufeinander zu (zusammenführen) oder voneinander weg (spreizen). Damit können Sie vergrößern oder verkleinern. Zweifingerbildlauf Setzen Sie zwei Finger auf das Touchpad und bewegen Sie sie vertikal oder horizontal.
Abbildung 4-1 Anzeige „CAPS LOCK“ 1 1. Anzeige „CAPS LOCK“ Darstellung kann je nach Modell abweichen. CAPS LOCK Diese Anzeige leuchtet grün, wenn die Feststelltaste für die Großbuchstaben betätigt wurde. Funktionstasten Die Funktionstasten (F12~F12) sind die zwölf Tasten oben auf der Tastatur. Mit Funktionstasten können Sie bestimmte Funktionen des Computers aktivieren oder deaktivieren. Die Funktionen werden durch Betätigen der zugehörigen Funktionstasten ausgeführt.
Tastenkombination Funktion FN+F8 Aktiviert/Deaktiviert das drahtlose Gerät. FN+F9 Aktiviert oder deaktiviert das Touchpad. FN+F10 Schaltet den Cursormodus ein. FN+F11 Schaltet den numerischen Modus ein. FN+F12 Sperrt den Cursor in einer bestimmten Zeile. FN+ESC Schaltet den Ton ein und aus. FN+LEERTASTE Ändert die Bildschirmauflösung. FN+1 Verkleinert die auf dem Desktop angezeigten Symbole oder die im Anwendungsfenster angezeigte Schriftart.
Flash Cards Flash Cards ermöglichen die visuelle und unkomplizierte Verwendung der Funktionstasten. Normalerweise sind die Karten ausgeblendet. So aktivieren Sie die Flash Cards: 1. 2. 3. Halten Sie die FN-Taste gedrückt. Die Flash Cards werden standardmäßig am oberen Rand des Bildschirms eingeblendet. Drücken Sie auf die Funktionstaste oder klicken Sie auf die Karte, die der gewünschten Funktion zugeordnet ist. Die ausgewählte Karte wird mit den verfügbaren Optionen eingeblendet.
Verwenden des AccuPoints Drücken Sie den AccuPoint einfach mit der Fingerspitze in die Richtung, in die Sie den Cursor auf dem Bildschirm verschieben möchten. Die beiden Tasten oberhalb des Touchpads funktionieren für den AccuPoint genauso wie für das Touchpad. Einige Modelle sind mit einem AccuPoint ausgestattet. Umgang mit dem AccuPoint Unter bestimmten Bedingungen bewegt sich der Cursor eventuell selbstständig oder in falscher Richtung über den Bildschirm.
Sie erhalten Reservekappen für den AccuPoint bei Ihrem autorisierten TOSHIBA-Händler. Verwenden des Fingerabdrucksensors Auf diesem Computer ist ein Fingerprint Utility zum Registrieren und Erkennen von Fingerabdrücken installiert. Wenn Sie die ID und ein Passwort für die Fingerabdruckauthentifizierung registrieren, brauchen Sie das Passwort nicht mehr über die Tastatur einzugeben.
Abbildung 4-3 Finger swipen 1 1 1. Sensor Halten Sie den Finger beim Swipen nicht zu steif und drücken Sie nicht zu fest auf den Sensor. Achten Sie darauf, dass die Mitte des Fingerabdrucks auf dem Sensor liegt. Andernfalls kann der Fingerabdruck möglicherweise nicht erkannt werden. Überprüfen Sie vor dem Swipen stets die Mitte des Fingerabdruckwirbels, damit diese entlang der Mittellinie des Sensors geführt werden kann.
Berühren Sie eine beliebige Oberfläche aus Metall, um eventuell vorhandene statische Elektrizität abzubauen. Statische Elektrizität ist besonders bei trockener Witterung eine häufige Ursache von Sensorfehlern. Reinigen Sie den Sensor mit einem fusselfreien Tuch. Verwenden Sie keinen Reiniger oder andere Chemikalien zum Reinigen des Sensors.
Hinweise zum Fingerprint Utility Wenn Sie die Verschlüsselungsfunktion von Windows , EFS (Encryption File System), zum Verschlüsseln einer Datei verwenden, kann die Datei mit der Verschlüsselungsfunktion dieser Software nicht weiter verschlüsselt werden. Sie können ein Backup der Fingerabdruckdaten oder der in den Websitepasswörtern registrierten Informationen erstellen. Verwenden Sie „Import/Export“ im Hauptmenü des TOSHIBA Fingerprint Utilitys.
2. 3. 4. 5. 6. 7. Der Bildschirm Registrieren wird angezeigt. Geben Sie das aktuelle Passwort in das Feld Windows-Passwort ein. Wenn Sie kein Windows-Pass eingerichtet haben, werden Sie aufgefordert, das neue Anmeldepasswort festzulegen. Klicken Sie anschließend auf Weiter. Klicken Sie auf das Symbol des nicht registrierten Fingers, den Sie registrieren möchten, und klicken Sie auf Weiter. Der Bildschirm mit Anweisungen zur Registrierung wird angezeigt.
4. Die Meldung „Möchten Sie den Vorgang beenden?“ wird angezeigt. Klicken Sie auf OK. Es wird wieder der Hauptbildschirm von TOSHIBA Fingerprint Utility angezeigt. Löschen der Fingerabdrücke aller Benutzer 1. 2. 3. 4. 5. 6. 7. 8. Klicken Sie im Hauptmenü von TOSHIBA Fingerprint Utility auf Als Administrator ausführen. Das Fenster der Benutzerkontensteuerung wird angezeigt. Klicken Sie auf Ja. Swipen Sie den registrierten Finger. Wählen Sie die Option Fingerabdruckverwaltung.
Fingerabdruckauthentifizierung vor dem Starten und einmaliges Anmelden Überblick über die Fingerabdruckauthentifizierung vor dem Starten Die tastaturbasierte Authentifizierung des Benutzerpasswortes beim Starten des Systems kann durch die Fingerabdruckauthentifizierung ersetzt werden.
Aktivieren der Fingerabdruckauthentifizierung vor dem Starten und des einmaligen Anmeldens Registrieren Sie Ihren Fingerabdruck im TOSHIBA Fingerprint Utility, bevor Sie die Authentifizierung vor dem Starten und das einmalige Anmelden mit Fingerabdruck aktivieren und konfigurieren. Überprüfen Sie, ob der Fingerabdruck eingetragen wurde, bevor Sie die Einstellungen konfigurieren. 1. 2. 3. 4. 5. Melden Sie sich als Administrator an (als Benutzer mit Administratorberechtigungen).
Echtzeituhr (RTC)-Funktion Die Echtzeituhr-Funktion (Real Time Clock, RTC) wird unterstützt. Der Akku versorgt die eingebaute Echtzeituhr und den Kalender mit Energie. Außerdem speichert er die Systemkonfiguration, wenn der Computer ausgeschaltet ist. Wenn die RTC-Funktionszeit vollständig erschöpft ist, gehen diese Systemdaten verloren und die Echtzeituhr und der Kalender arbeiten nicht mehr. Sie können die RTC-Einstellungen im BIOS-Setup ändern. Nähere Informationen finden Sie unter Fehlerbehebung.
Der Akku ist extrem heiß oder kalt (wenn der Akku zu heiß ist, wird er möglicherweise gar nicht aufgeladen). Um sicherzustellen, dass der Akku bis zu seiner vollen Kapazität aufgeladen wird, laden Sie ihn bei Zimmertemperatur (5° C bis 35° C) auf. Der Akku ist fast vollständig entladen. Lassen Sie den Netzadapter in diesem Fall einige Minuten lang angeschlossen; der Akku beginnt dann, sich aufzuladen. Die Anzeige DC IN/Akku zeigt u. U.
Maximieren der Akkubetriebszeit Die Leistungsfähigkeit eines Akkus zeigt sich daran, wie lange er nach einem Ladevorgang Energie zur Verfügung stellen kann. Wie lange die Ladung eines Akkus reicht, richtet sich nach den folgenden Faktoren: Prozessorgeschwindigkeit Bildschirmhelligkeit System-Energiesparmodus Ruhezustand des Systems LCD-Abschaltung Wie lange das interne Speicherlaufwerk ausgeschaltet war Häufigkeit und Dauer der Verwendung des internen Speicherlaufwerks und der externen Laufwerke (z. B.
4. 5. Schließen Sie den Netzadapter an den Gleichstromeingang (DC IN 19 V) des Computer und an eine stromführende Steckdose an. Die Anzeige DC IN/Akku leuchtet gelb, um anzuzeigen, dass der Akku aufgeladen wird. Wenn die Anzeige DC IN/Akku nicht leuchtet, wird der Computer nicht mit Strom versorgt. Überprüfen Sie die Verbindungen des Netzadapters und des Netzkabels. Laden Sie den Akku auf, bis die Anzeige DC IN/Akku weiß leuchtet.
4. Um das SIM-Kartenfach zu öffnen, stecken Sie einen schmalen Gegenstand (ca. 10 mm lang, Durchmesser 0,8 mm), zum Beispiel eine gerade gebogene Büroklammer, in die Entnahmeöffnung. Ziehen Sie das SIM-Kartenfach vorsichtig auf. Ziehen Sie das SIM-Kartenfach niemals vollständig aus dem Steckplatz. Abbildung 4-4 SIM-Kartenfach mit der Entnahmeöffnung öffnen (Z30-B) 1 Abbildung 4-5 SIM-Kartenfach mit der Entnahmeöffnung öffnen (Z40-B) 1 1. Entnahmeöffnung 5. 6.
Abbildung 4-7 SIM-Karte installieren (Z40-B) 1 3 1. SIM-Kartensteckplatz 2. SIM-Karte 2 3. SIM-Kartenfach Achten Sie darauf, dass keine Gegenstände aus Metall, wie z. B. Heftoder Büroklammern, in das Innere des Computers gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der Computer beschädigt und ein Feuer ausbrechen könnte. Berühren Sie nicht die Anschlüsse der SIM-Karte oder des Computers. Kleinste Fremdkörper auf den Anschlüssen können zu Zugriffsproblemen führen.
In einer Tasche oder einem Karton Zwischen dicht stehenden Bäumen Wenn sich ein Hindernis (Person oder Gegenstand) vor der Antenne befindet In einer Unterführung, unterirdisch oder unter Wasser In dicht bebauten Straßen oder Wohngebieten In der Nähe von Hochspannungsleitungen Bei starkem Regen oder Schneefall LAN Der Computer unterstützt Ethernet-LANs (10 Megabits pro Sekunde, 10BASE-T), Fast Ethernet-LANs (100 Megabits pro Sekunde, 100BASETX) und Gigabit Ethernet-LANs (1000 Megabits pro Sekunde, 1000BASET
Schließen Sie den Netzadapter an, bevor Sie das LAN-Kabel anschließen. Der Netzadapter muss angeschlossen bleiben, während das LAN verwendet wird. Wenn Sie den Netzadapter abtrennen, während der Computer auf das LAN zugreift, kann das System abstürzen. Schließen Sie nur das LAN-Kabel, keine andere Kabel an die LANBuchse an. Andernfalls könnte es zu Fehlfunktionen kommen. Schließen Sie kein Strom abgebendes Gerät an das LAN-Kabel an, wenn es mit der LAN-Buchse verbunden ist.
Kurzschluss verursachen, wodurch der Computer beschädigt und ein Feuer ausbrechen könnte. Für die Verwendung einer miniSD/microSD-Karte wird ein Adapter benötigt. Nicht alle Speichermedien wurden getestet. Daher kann keine Garantie dafür übernommen werden, dass alle Speichermedien erwartungsgemäß funktionieren.
Formatierung von Speichermedien Neue Speicherkarten sind entsprechend bestimmten Standards formatiert. Wenn Sie eine Speicherkarte neu formatieren möchten, verwenden Sie ein Gerät, dass diese Speicherkarte unterstützt. Formatieren von Speichermedienkarten Speichermedienkarten werden nach bestimmten Standards formatiert verkauft.
Hinweise zur Schreibschutzfunktion Speichermedienkarten verfügen über eine Schreibschutzfunktion. SD-Karte (SD-Speicherkarte, SDHC-Speicherkarte und SDXCSpeicherkarte) Bringen Sie den Schreibschutzschalter in die gesicherte Position, wenn Sie die Aufzeichnung von Daten verhindern möchten. Einsetzen von Speichermedien Die nachstehenden Anleitungen gelten für alle unterstützten Speichergeräte. So setzen Sie ein Speichermedium ein: 1. 2. 3.
Entfernen von Speichermedien Die nachstehenden Anleitungen gelten für alle unterstützten Speichergeräte. So entfernen Sie ein Speichermedium: 1. 2. 3. 4. Klicken Sie in der Windows-Taskleiste auf das Symbol Hardware sicher entfernen und Medium auswerfen Wählen Sie Speichermedium. Drücken Sie das Speichermedium, bis Sie ein Klicken hören. Ziehen Sie das Medium vollständig heraus.
2. Drücken Sie die Smartcard vorsichtig in den Steckplatz, um eine sichere Verbindung herzustellen. Der Computer erkennt die Smartcard und zeigt in der Windows-Taskleiste ein Symbol an. Achten Sie beim Einsetzen einer Smartcard in den SmartcardSteckplatz darauf, dass Sie die Karte richtig herum halten. Setzen Sie die Smartcard ganz bis in das Ende des SmartcardSteckplatzes ein. Die Smartcard ragt leicht über den Gehäuserand hinaus.
Anschließen von externen Anzeigegeräten Der Computer ist mit einem integrierten Bildschirm ausgestattet; Sie können jedoch über die Anschlüsse des Computers weitere Anzeigegeräte anschließen. Anschluss für einen externen RGB-Monitor Ein externer analoger Monitor kann an den Anschluss für einen externen RGB-Monitor angeschlossen werden. So schließen Sie einen externen analogen Monitor an: 1. Schließen Sie das RGB-Kabel an den Anschluss für einen externen RGB-Monitor an.
Audiodaten ohne Qualitätsverluste. An den HDMI-Ausgang lassen sich HDMI-kompatible Anzeigegeräte, zum Beispiel Fernseher, anschließen. So schließen Sie ein HDMI-kompatibles Anzeigegerät an: Für den Anschluss eines Geräts an den HDMI-Ausgang benötigen Sie ein geeignetes HDMI-Kabel. 1. 2. 3. Stecken Sie ein Ende des HDMI-Kabels in den HDMI-Eingang des HDMI-Anzeigegeräts. Stecken Sie das andere Ende des HDMI-Kabels in den HDMIAusgang des Computers. Schalten Sie das HDMI-Anzeigegerät ein.
wenn Kommunikationsvorgänge laufen Auswahl des HD-Formats So wählen Sie den Anzeigemodus aus: 1. 2. Klicken Sie auf Start -> Systemsteuerung -> Darstellung und Anpassung -> Anzeige -> Anzeigeeinstellungen ändern -> Erweiterte Einstellungen -> Alle Modi auflisten. Wählen Sie einen der Modi unter Alle Modi auflisten.
Der Port Replicator wird direkt an die Dockingschnittstelle auf der Unterseite des Computers angeschlossen. Über den Netzadapter wird der Port Replicator an eine Steckdose angeschlossen. Sie müssen den Netzadapter anschließen, bevor Sie die Verbindung zu einem Port Replicator herstellen.
Abbildung 4-13 Computer mit dem Port Replicator ausrichten (Z30-B) 1 1. Dockinganschluss (Computer) Darstellung kann je nach Modell abweichen. Achten Sie darauf, dass bei Verwendung des TOSHIBA Hi-Speed Port Replicator III 180W/120W immer der Netzadapter angeschlossen ist. Andernfalls funktioniert der Port Replicator nicht, was zu Datenverlust führen kann. Einige Modelle unterstützen die Verwendung von mehreren Bildschirmen, wenn ein TOSHIBA Hi-Speed Port Replicator III 180W/120W verwendet wird.
1. 2. Drehen Sie den Computer so, dass der Schlitz für ein Sicherheitsschloss Ihnen zugewandt ist. Richten Sie das Sicherheitskabel an dem dafür vorgesehenen Schlitz aus und befestigen Sie es. Abbildung 4-14 Sicherheitsschloss (Z30-B) 2 1 1. Schlitz für ein Sicherheitsschloss 2. Sicherheitsschloss Darstellung kann je nach Modell abweichen.
Um die Lautstärke für eine Anwendung zu einzustellen, schieben Sie den Regler für die entsprechende Anwendung. Mikrofonpegel So ändern Sie den Mikrofonpegel: 1. 2. 3. Klicken Sie mit der rechten Maustaste auf das Lautsprechersymbol in der Windows-Taskleiste und wählen Sie Aufnahmegeräte. Wählen Sie Mikrofon und klicken Sie auf Eigenschaften. Verschieben Sie auf der Registerkarte Pegel den Schieberegler Mikrofon, um die Aufnahmelautstärke zu erhöhen oder zu verringern. Stellen Sie ggf.
Für dieses Produkt gelten US-Patente. Siehe http://patents.dts.com . Hergestellt unter Lizenz von DTS Licensing Limited. Realtek HD Audio-Manager Sie können die Audiokonfiguration mit dem Realtek HD Audio-Manager überprüfen und ändern. So starten Sie Realtek HD Audio-Manager: Klicken Sie auf Start -> Systemsteuerung -> Hardware und Sound > Realtek HD Audio-Manager. Wenn Sie den Realtek HD Audio-Manager erstmals starten, sehen Sie die folgenden Registerkarten. Lautsprecher ist das Standardausgabegerät.
Anzeigemodus Die Einstellungen für den Anzeigemodus werden im Dialogfeld Bildschirmauflösung festgelegt. Um das Dialogfeld Bildschirmauflösung zu öffnen, klicken Sie auf Start > Systemsteuerung -> Darstellung und Anpassung -> Anzeige -> Anzeigeeinstellungen ändern. Beim Ausführen bestimmter Anwendungen (zum Beispiel 3DAnwendungen und Filmwiedergabe) kann es zu Störungen, Flimmern oder Bildauslassungen kommen. In diesem Fall ändern Sie die Auflösung des Bildschirms.
Kapitel 5 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zum Betrieb der einzelnen Programme finden Sie in den jeweiligen Onlinehandbüchern, Hilfedateien oder README.TXT-Dateien (falls zutreffend).
TOSHIBA Accessibility Das TOSHIBA Accessibility Utility unterstützt Benutzer mit eingeschränkten Bewegungsmöglichkeiten bei der Verwendung der Funktionstasten. Mit diesem Dienstprogramm können Sie einstellen, dass die Taste FN nach einmaligem Drücken einrastet. Tastenkombinationen können dann als Tastenfolge eingegeben werden, d. h. Sie können FN loslassen und dann eine der Funktionstasten drücken. Die Taste FN bleibt aktiviert, bis Sie eine andere Taste drücken.
TOSHIBA Service Station Diese Anwendung ermöglicht, dass der Computer automatisch nach Updates für TOSHIBA-Software oder nach anderen wichtigen Informationen von TOSHIBA, die Ihr Computersystem und dessen Programme betreffen, sucht. Wenn diese Anwendung aktiviert ist, überträgt sie eine begrenzte Menge von Systeminformationen an unsere Server. Diese Informationen werden unter strikter Einhaltung der Regeln und Vorschriften sowie geltender Datenschutzbestimmungen behandelt.
*1 Um die Energieoptionen aufzurufen, klicken Sie auf Start -> Systemsteuerung -> System und Sicherheit -> Energieoptionen. Automatische BildMit dieser Funktion wird die Stromversorgung schirmabschaltung *1 des Computer-LCDs unterbrochen, wenn über einen festgelegten Zeitraum keine Tastatureingabe erfolgte. Sobald eine Taste gedrückt wird, wird die Stromversorgung wieder hergestellt. Diese können Sie in den Energieoptionen festlegen.
Automatischer Reicht der Akkuladezustand für den weiteren Ruhezustand bei Betrieb nicht mehr aus, wird der Computer Entladung des Akkus automatisch in den Ruhezustand *1 heruntergefahren. Diese können Sie in den Energieoptionen festlegen. Energiesparmodus Wenn Sie Ihre Arbeit unterbrechen müssen, können Sie diese Funktion verwenden, um den Computer auszuschalten, ohne die Software zu beenden.
Schutz vor Überhitzung *1 Zum Schutz vor Überhitzung verfügt der Prozessor über einen eingebauten Temperatursensor, der bei Bedarf einen Lüfter aktiviert oder die CPU-Taktfrequenz herabsetzt. Sie können festlegen, ob bei Bedarf zunächst der Lüfter eingeschaltet wird und dann, falls nötig, die Taktfrequenz verringert wird, oder ob bei Bedarf zunächst die Taktfrequenz verringert und dann, falls nötig, der Lüfter eingeschaltet wird. Diese Funktionen werden über die Energieoptionen gesteuert.
Es ist jedoch möglich, dass die Schlaf- und Ladefunktion mit bestimmten externen Geräten nicht verwendet werden kann, obwohl diese der USB-Spezifikation entsprechen. Schalten Sie in diesem Fall den Computer ein, um das Gerät aufzuladen. Wenn die USB-Schlaf- und Ladefunktion aktiviert ist, wird der kompatible Anschluss auch bei ausgeschaltetem Computer mit Bus Power (DC 5 V) versorgt. USB Bus Power (DC 5 V) wird an alle externen Geräte geliefert, die an die kompatiblen Anschlüsse angeschlossen sind.
Aktivieren der Schlaf- und Ladefunktion Mit diesem Utility können Sie die Schlaf- und Ladefunktion aktivieren oder deaktivieren. Aktivieren Sie das Kontrollkästchen Schlaf- und Ladefunktion aktivieren, um diese Funktion für kompatible USB-Anschlüsse zu aktivieren. Standardmäßig ist diese Funktion deaktiviert. Einstellungen für den Stromversorgungsmodus Der PC verfügt über mehrere Lademodi, sodass zahlreiche unterschiedliche USB-Geräte für die Schlaf- und Ladefunktion unterstützt werden können.
Die Benutzerauthentifizierung kann erforderlich sein, wenn Sie mit dem TOSHIBA Passwort-Dienstprogramm Passwörter löschen oder ändern usw. Festlegen (Schaltfläche) Klicken Sie auf diese Schaltfläche, um ein Passwort zu registrieren. Nach der Einstellung eines Passworts werden Sie bei jedem Start des Computers zur Eingabe dieses Passworts aufgefordert.
Wenn Sie Ihr HDD/SSD-Benutzerpasswort vergessen, kann Ihnen TOSHIBA nicht helfen; in diesem Fall bleibt Ihr internes Speicherlaufwerk VOLLSTÄNDIG und DAUERHAFT UNBRAUCHBAR. TOSHIBA ist NICHT haftbar für Datenverluste oder den nicht mehr möglichen Zugriff auf das interne Speicherlaufwerk oder für jegliche andere Verluste oder Schäden, die Ihnen oder anderen aus dem Verlust des Zugriffs auf das interne Speicherlaufwerk entstehen. Falls Ihnen dieses Risiko zu hoch ist, richten Sie kein HDD/SSD-Passwort ein.
Zu diesem Zeitpunkt funktionieren die Funktionstasten nicht. Sie können erst nach der Eingabe des Passworts verwendet werden. 2. 3. Geben Sie das Passwort ein. Drücken Sie ENTER. Wenn Sie das Passwort dreimal hintereinander falsch eingeben oder das Passwort nicht innerhalb von 1 Minute eingeben, wird der Computer ausgeschaltet. In diesem Fall funktionieren einige Funktionen, die den Computer automatisch einschalten (Wakeup-on-LAN, Taskplaner usw.), möglicherweise nicht.
Tastatur – Hier haben Sie Zugriff auf die Reaktivierungsfunktion der Tastatur und die Konfiguration der Hintergrundbeleuchtung USB – Hier können Sie USB-Einstellungen vornehmen SATA – Hier können Sie SATA-Einstellungen vornehmen LAN – Hier können Sie LAN-Einstellungen vornehmen Erweiterte Optionen – Hier können Sie Bedingungen für bestimmte Geräte oder Funktionen festlegen Die hier beschriebenen Einstellungen oder Optionen können je nach Modell leicht abweichen.
werden. In anderen Ländern gelten unter Umständen andere Datenschutzgesetze als in Ihrem Land oder Gebiet. Sie können TOSHIBA PC Health Monitor jederzeit deaktivieren, indem Sie die Software über Programm deinstallieren in der Systemsteuerung deinstallieren. Dabei werden alle gesammelten Informationen automatisch vom internen Speicherlaufwerk gelöscht. Die TOSHIBA PC Health Monitor-Software verlängert oder ändert die Verpflichtungen von Toshiba im Rahmen der Standardgarantie in keiner Weise.
Wenn der Computer während der Audio- oder Videowiedergabe Erschütterungen erkennt und der HDD-Kopf in die Parkposition bewegt wird, kann die Wiedergabe zeitweilig unterbrochen werden. Die HDD-Schutzfunktion kann bei Modellen mit SSD nicht verwendet werden. Wenn Vibrationen erkannt werden, wird eine Benachrichtigung auf dem Bildschirm angezeigt, und das Symbol in der Taskleiste ändert sich und zeigt den Schutzstatus an.
AUS TOSHIBA HDD-Schutz ist deaktiviert. Schutzstufe Die Empfindlichkeit beim Erkennen von Vibrationen, Stößen und ähnlichen Einflüssen kann auf OFF (Aus), 1, 2 oder 3 eingestellt werden. Stufe 3 bietet den besten Schutz für den Computer. Wenn der Computer jedoch in einer mobilen Umgebung oder unter anderen instabilen Bedingungen gehalten wird, wird der HDD-Schutz mit Stufe 3 häufig ausgelöst und das Schreiben auf die und Lesen von der HDD wird verlangsamt.
Diese Funktion kann die CPU und den Arbeitsspeicher bei einigen Modellen stark beanspruchen. Der Computer reagiert möglicherweise langsam, wenn Sie versuchen, andere Anwendungen auszuführen, während der 3D Viewer angezeigt wird. Wenn Sie den Computer heftig schütteln oder anderen starken Bewegungen aussetzen, könnte er dadurch beschädigt werden.
Die Systemwiederherstellungsoptionen können auch manuell ausgeführt werden, um Probleme zu beheben. Gehen Sie dazu folgendermaßen vor: Befolgen Sie die Anweisungen auf dem Bildschirm. 1. 2. 3. 4. Schalten Sie den Computer aus. Halten Sie die Taste F8 gedrückt, während Sie den Computer einschalten. Es wird das Menü Erweiterte Startoptionen angezeigt. Wählen Sie mithilfe der Pfeiltasten die Option Computer reparieren und drücken Sie ENTER. Befolgen Sie die Anweisungen auf dem Bildschirm.
Ein Wiederherstellungsabbild der Software auf dem Computer wird im internen Speicherlaufwerk gespeichert und kann mit den folgenden Schritten entweder auf Disc oder USB-Flash-Speicher kopiert werden: 1. Wählen Sie eine leere Disc oder einen USB-Flash-Speicher. Sie können in der Anwendung auf einer Vielzahl von Medien wählen, auf die das Wiederherstellungs-Image kopiert werden kann, darunter Discs und USB-Flash-Speicher.
4. 5. Wählen Sie mithilfe der Pfeiltasten nach oben und nach unten die entsprechende Option für Ihr Wiederherstellungsmedium aus. Es wird ein Menü angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm. Wenn Sie sich zuvor entschieden haben, die Wiederherstellungspartition zu entfernen und versuchen, ein Wiederherstellungsmedium zu erstellen, wird die folgende Meldung angezeigt: „The Recovery Media Creator can not be launched because there is no recovery partition.
3. Benutzerhandbuch Befolgen Sie die Anweisungen auf dem Bildschirm, um die Wiederherstellung abzuschließen.
Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Sie sollten sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden. Vorgehen bei der Problemlösung Wenn Sie sich an die folgenden Richtlinien halten, ist es viel leichter, Probleme zu beheben.
Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert und alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen. Überprüfen Sie alle Kabel auf lose Drähte und alle Anschlüsse auf lose Anschlussstifte.
Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Wenn Sie ein Softwarepaket nicht laden können, sind möglicherweise die Medien oder das Programm beschädigt. Versuchen Sie in diesem Fall, ein anderes Exemplar der Software zu laden, falls möglich. Wenn eine Fehlermeldung angezeigt wird, während Sie ein Softwareprogramm benutzen, lesen Sie die mit der Software gelieferte Dokumentation.
So schließen Sie ein Programm, das nicht mehr reagiert: 1. 2. 3. 4. Drücken Sie gleichzeitig STRG, ALT und ENTF (einmal) und klicken Sie dann auf Task-Manager starten. Das Fenster des Windows TaskManagers wird angezeigt. Klicken Sie auf die Registerkarte Anwendungen. Wenn ein Programm nicht mehr reagiert, wird dies neben dem Namen des Programms angezeigt. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden.
Stromversorgung Wenn der Computer nicht an eine Steckdose angeschlossen ist, ist der Akku die Hauptstromquelle. Der Computer verfügt auch über eine RTCFunktion (RTC = Real Time Clock, Echtzeituhr). Alle Energieressourcen hängen miteinander zusammen und können jeweils zu Problemen mit der Stromversorgung führen. Systemabschaltung wegen Überhitzung Wenn die Prozessortemperatur trotz der Kühlungsmaßnahmen zu heiß wird, schaltet sich der Computer automatisch ab, um Schäden zu verhindern.
Problem Vorgehensweise Akku versorgt den Computer nicht mit Strom Der Akku ist möglicherweise entladen. Schließen Sie den Netzadapter an, um den Akku aufzuladen. Akku wird nicht aufgeladen, wenn der Netzadapter angeschlossen ist. Ist der Akku vollständig entladen, lädt er sich nicht sofort wieder auf. Warten Sie in diesem Fall einige Minuten, bevor Sie es erneut versuchen.
Tastatur Probleme mit der Tastatur können durch das Setup und die Konfiguration des Computers verursacht werden. Nähere Informationen finden Sie im Abschnitt Tastatur. Problem Vorgehensweise Auf dem Bildschirm erscheinen die falschen Zeichen. Sehen Sie in der Softwaredokumentation nach und überprüfen Sie, dass keine Tastaturneubelegung erfolgt (eine Neubelegung umfasst die Änderung oder Neuzuweisung der Funktion der einzelnen Tasten).
HDD Probleme Vorgehensweise Computer ist sehr langsam Die Dateien auf der HDD sind möglicherweise fragmentiert. In diesem Fall sollten Sie eine Defragmentierung ausführen, um den Zustand der Dateien und des internen Speicherlaufwerks zu überprüfen. In der Dokumentation zum Betriebssystem oder in der Online-Hilfedatei finden Sie nähere Informationen zur Ausführung und Verwendung des Defragmentierungsprogramms.
Touchpad Problem Vorgehensweise Das Touchpad funktioniert nicht. Gehen Sie folgendermaßen vor, um die Einstellungen für die Geräteauswahl zu überprüfen: 1. 2. Klicken Sie dazu auf Start -> Systemsteuerung -> Hardware und Sound > Maus. Klicken Sie auf der Registerkarte Erweitert auf Erweiterte Einstellungen... -> Geräteauswahl. Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung des bewegen Sie die Maus dann erneut.
USB-Maus Problem Vorgehensweise Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung der bewegen Sie die Maus dann erneut. Maus Entfernen Sie die Maus vom Computer und schließen Sie sie an einen freien USB-Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
Problem Vorgehensweise USB-Gerät funktioniert nicht Entfernen Sie das USB-Gerät vom Computer und schließen Sie es an einen freien Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass die USB-Gerätetreiber korrekt installiert sind. Sehen Sie dazu sowohl in der Gerätedokumentation als auch in der Betriebssystemdokumentation nach. Schlaf- und Ladefunktion Weitere Informationen finden Sie im Abschnitt Schlaf- und Ladefunktion.
Problem Vorgehensweise Der Akku entlädt sich schnell, selbst wenn der Computer ausgeschaltet ist. Wenn die Schlaf- und Ladefunktion aktiviert ist, entlädt sich der Akku des Computers im Ruhezustand oder wenn der Computer ausgeschaltet ist. Schließen Sie den Netzadapter an den Computer an oder deaktivieren Sie die Schlaf- und Ladefunktion. An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht.
Problem Vorgehensweise Es wird kein Ton ausgegeben. Drücken Sie die Funktionstasten zum Erhöhen oder Verringern der Lautstärke. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie, ob die Stummschaltung (Ton aus) aktiviert wurde Überprüfen Sie die Kopfhörerverbindung. Überprüfen Sie im Windows-Geräte-Manager, dass das Audiogerät aktiviert ist und ordnungsgemäß arbeitet.
Problem Vorgehensweise Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit der Funktionstaste das aktive Anzeigegerät, sodass nicht das interne verwendet wird. Überprüfen Sie, dass der externe Monitor angeschlossen ist.
Problem Vorgehensweise Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Lassen sich die Probleme nicht beheben, wenden Sie sich an den LAN-Administrator. WLAN Problem Vorgehensweise Zugriff auf das Wireless LAN ist nicht möglich Vergewissern Sie sich, dass die Funktion für die drahtlose Kommunikation beim Computer eingeschaltet ist.
Hilfequellen konsultieren. Bevor Sie sich an TOSHIBA wenden, sollten Sie Folgendes versuchen: Sehen Sie sich die Abschnitte zur Fehlerbehebung in den Dokumentationen zu Ihrer Software und zu den Peripheriegeräten an. Treten Fehler bei der Ausführung von Softwareanwendungen auf, lesen Sie die Abschnitte zur Fehlerbehebung in der Softwaredokumentation. Sie können sich auch an den technischen Support des Softwareherstellers wenden.
Kapitel 7 Anhang Technische Daten In diesem Abschnitt sind die technischen Daten des Computers zusammengefasst. Abmessungen Die folgenden Maße und Gewichte berücksichtigen keine Teile, die über das Gehäuse des Computers hinausragen. Die physischen Abmessungen sind modellabhängig.
Stromversorgung Netzadapter 100-240 V Wechselstrom 50 oder 60 Hertz Computer 19 V DC Pinbelegung beim Anschluss für einen externen RGBMonitor 5 1 10 6 15 11 Pin Signalname Beschreibung I/O 1 CRV Rotes Videosignal O 2 CGV Grünes Videosignal O 3 CBV Blaues Videosignal O 4 Reserviert Reserviert 5 GND Ground, Erdung 6 GND Ground, Erdung 7 GND Ground, Erdung 8 GND Ground, Erdung 9 +5 V Stromversorgung 10 GND Ground, Erdung 11 Reserviert Reserviert 12 SDA Seriell
Netzkabel und Netzstecker Der Netzstromeingang des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird. Alle Netzkabel müssen folgenden Spezifikationen entsprechen: Leiterquerschnitt: Minimum 0,75 mm2 Nennstromstärke: Minimum 2,5 Ampere Sicherheitsstandards China: CQC USA und Kanada: UL-gelistet und CSA-zertifiziert Nein.
USA Großbritannien UL-zertifiziert BS-zertifiziert Australien Europa AS-zertifiziert Von der entsprechenden Behörde zertifiziert Kanada China CSA-zertifiziert CCC-zertifiziert Informationen zu drahtlosen Geräten Übergreifende Funktionalität der Drahtlostechnologie Die Wireless-LAN-Funktion ist mit anderen LAN-Systemen kompatibel, die auf der Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing-Funktechnik basieren, und erfüllt die folgenden Standards: IEEE 802.
Sie Bluetooth- und Wireless LAN-Geräte gleichzeitig verwenden, kann die Netzwerkleistung möglicherweise beeinträchtigt werden; unter Umständen wird die Netzwerkverbindung sogar getrennt. Schalten Sie in diesem Fall umgehend eines der Geräte ab. Wenn Sie Fragen zur Verwendung der Wireless-LAN- oder BluetoothModule haben, besuchen Sie http://www.pc.support.global.toshiba.com In Europa: http://www.toshiba-europe.com/computers/tnt/bluetooth.
Verwenden Sie die Wireless LAN- (Wi-Fi) oder Bluetooth-Funktionen nicht in der Nähe von Mikrowellengeräten oder in Gebieten, die Funkstörungen oder magnetischen Feldern ausgesetzt sind. Störungen durch Mikrowellengeräte oder andere Quellen können den Wi-Fi- oder Bluetooth-Betrieb unterbrechen. Schalten Sie alle Drahtlosfunktionen aus, wenn sich eine Person mit einem Herzschrittmacher oder einem anderen medizinischen elektrischen Gerät in der Nähe befindet.
Funkmerkmale Die Funkeigenschaften von Wireless LAN-Modulen können in Abhängigkeit von den folgenden Punkten variieren: Land/Vertriebsgebiet, in dem das Produkt erworben wurde Produkttyp Die drahtlose Kommunikation unterliegt häufig den nationalen Vorschriften für den Funkverkehr.
Die integrierten Bluetooth-Funktionen des Computers und ein externer Bluetooth-Adapter können nicht gleichzeitig verwendet werden. Die Bluetooth-Drahtlostechnologie verfügt über die folgenden Merkmale: Sicherheit Zwei moderne Sicherheitsmechanismen gewährleisten eine hohe Sicherheitsstufe: Die Authentifizierung verhindert den Zugriff auf kritische Daten und die Vertuschung der Herkunft einer Nachricht. Die Verschlüsselung verhindert das „Abhören“ und gewährleistet die Vertraulichkeit der Verbindung.
Produktunterstützung: Aktuelle Informationen zur Unterstützung von Betriebssystemen, verfügbaren Sprachen oder Upgrades finden Sie auf unserer Website unter http://www.toshiba-europe.com/computers/tnt/bluetooth.htm für Europa oder www.pcsupport.toshiba.com für die Vereinigten Staaten. Funk-Zulassungsbestimmungen Das drahtlose Gerät muss entsprechend den Anweisungen des Herstellers, die Sie mit dem Gerät erhalten haben, installiert und verwendet werden.
Eingeschränkte Verwendung der 5150-5350-MHz-Frequenzen in Europa Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden. Luxemburg: Implementiert Allgemeine Autorisierung erforderlich für Netzwerk- und Dienstbereitstellung. Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2.
Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2. Zur Verwendung für lokale Netzwerke zur Kommunikation von Bordbesatzungen im Bereich des Flughafens und während aller Flugphasen zugelassen. Zur Verwendung für öffentlich zugängliche lokale Netzwerke an Bord von Flugzeigen während des Flugs in Flughöhen über 3000 m zugelassen.
pourraient causer du brouillage et/ou des dommages aux dispositifs LANEL. Die Kennzeichnung „IC“ vor der Gerätezertifizierung zeigt lediglich an, dass die technischen Spezifikationen von Industry Canada eingehalten werden. USA – Federal Communications Commission (FCC) Dieses Gerät wurde erfolgreich bezüglich der Erfüllung der Klasse BNormen für digitale Geräte, Abschnitt 15 der FCC-Bestimmungen, getestet.
Hochenergie-Radare sind als primäre Nutzer (d.h. Nutzer mit Priorität) der Frequenzbänder 5,25 bis 5,35 GHz und 5,65 bis 5,85 GHz zugewiesen und diese Radare können Interferenzen und/oder Schäden an NiedrigenergieLAN-Geräten verursachen. Taiwan Artikel 12 Ohne Genehmigung von der DGT darf kein Unternehmen oder Benutzer bei einer zugelassenen Niedrigenergiefunkeinrichtung die Frequenz ändern, die Übertragungsstärke ändern oder die ursprünglichen Merkmale und die Leistung ändern.
Niedrigenergiefunkstationen zur mobilen Objekterkennung (RFID), die in Fertigungsanlagen verwendet werden ( = Sonstige Funkstationen). 1. 2. 3. Vergewissern Sie sich vor der Verwendung dieses Geräts, dass es keine Störungen der oben genannten Einrichtungen verursacht.
Geräteautorisierung Dieses Gerät trägt die Technical Regulation Conformity Certification und gehört zur Geräteklasse von Funkeinrichtungen von NiedrigenergieDatenkommunikationssystemen gemäß den entsprechenden japanischen Gesetzen. Intel® Dualband Wireless-AC 7265 Intel® Dualband Wireless-N 7265 Intel® Wireless-N 7265 Name der Funkeinrichtung: 7265NGW DSP Research, Inc. Zulassungsnummer: D140017003 Intel® Dualband Wireless-AC 3160 Name der Funkeinrichtung: 3160NGW DSP Research, Inc.
Malta Monaco Niederlande Norwegen Philippinen Polen Portugal Rumänien Slowakei Slowenien Spanien Schweden Schweiz Großbritannien USA Informationen zu Intel AMT Je nach Modell unterstützt der Computer möglicherweise Intel® Active Management Technology (AMT). Durch Nutzung integrierter Plattformfunktionen und beliebter Drittanbieterlösungen für Verwaltung und Sicherheit ermöglicht es Intel AMT IT-Benutzern, ihre vernetzten Computingbestände besser zu erkennen, zu reparieren und zu schützen.
2. Geben Sie ein neues Passwort ein. Das Passwort muss die folgenden Anforderungen hinsichtlich der verwendeten Zeichen und der Länge erfüllen: Es muss zwischen 8 und 32 Zeichen lang sein. Es muss mindestens eine Ziffer enthalten („0“, „1-9“). Es muss eine Mischung aus Kleinbuchstaben („a“, „b“, „z“ usw.) und Großbuchstaben („A“, „B“, „Z“ usw.) enthalten. Es muss mindestens eines der folgenden Sonderzeichen enthalten:` ~!@$%^&*()-=+[];’<.>/? Der Unterstrich („_“) gilt nicht als Sonderzeichen.
9. Drücken Sie die Taste F10, um die Einstellungen zu speichern, und dann die Taste J. Wenn der Netzadapter an den Computer angeschlossen und die AMT-Funktion aktiviert ist, wird der Arbeitsspeicher möglicherweise auch dann noch mit Strom versorgt, wenn der Computer heruntergefahren wird oder in den Energiesparmodus oder Ruhezustand versetzt wird. Wenn der Netzadapter angeschlossen wird, wird der Computer mit Strom versorgt und kann eingeschaltet werden. Wenn die Stromversorgung automatisch nach ca.
Die folgenden Funktionen werden nicht unterstützt: RPAT (Remote PC Assist Technology) Remoteaktualisierung des BIOS Rechtliche Hinweise Nicht verwendete Symbole Die Gehäuse von Computern sind häufig so konstruiert, dass alle innerhalb einer Produktserie möglichen Konfigurationen darin untergebracht werden können. Das Modell Ihrer Wahl bietet deshalb unter Umständen nicht alle Funktionen und Spezifikationen, für die sich Symbole oder Schalter am Computer-Gehäuse befinden.
verwenden. Lesen Sie auch die weiteren Informationen, die Sie mit dem Computer erhalten haben. Wenn Sie sich an den technischen Service und Support von TOSHIBA wenden möchten, lesen Sie bitte den Abschnitt TOSHIBA Kundendienst. 64-Bit-Computing 64-Bit-Prozessoren wurden entwickelt, um die Vorteile von 32-Bit- und 64Bit-Computing zu nutzen.
Akkulaufzeit Die Akkulaufzeit kann je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen erheblich variieren, dazu tragen auch die normalen Leistungsschwankungen aufgrund der Bauweise einzelner Komponenten bei. Die angegebenen Zeiten für die Akkulaufzeit wurden bei Tests von TOSHIBA zum Zeitpunkt der Veröffentlichung auf bestimmten Modellen unter bestimmten Konfigurationen erzielt. Die Aufladezeit variiert je nach Verwendung.
WLAN Die Übertragungsgeschwindigkeit und die Reichweite des Wireless LAN können variieren. Sie sind von folgenden Faktoren abhängig: elektromagnetische Umgebung, Hindernissen, Aufbau und Konfiguration des Zugangspunktes sowie Aufbau des Clients und Software/HardwareKonfiguration. Die tatsächliche Übertragungsgeschwindigkeit wird unter dem theoretischen Maximum liegen.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit." 4. 5. 6. ( http://www.openssl.org/ ) The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be removed.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
All rights reserved. """ Please replace with the value from the FreeType version you actually use. Legal Terms ============ 0. Definitions -------------Throughout this license, the terms `package`, `FreeType Project`, and `FreeType archive` refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project`, be they named as alpha, beta or final release.
Redistribution of source code must retain this license file (`FTL.TXT`) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files. Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation.
Stichwortverzeichnis A E Akku Energiesparmodus 5-4 Kapazität überwachen 4-16 Typen 4-14 Energiesparmodus automatisch 5-4 einstellen 2-9 Externer Monitor Probleme 6-13 Anzeige „DC IN/Akku“ 3-25 Anzeigemodus 4-36 Audiosystem Probleme 6-12 G Grafikchip 3-23 H B Bildschirm Anzeige 3-9, 3-19 automatische Abschaltung 5-4 öffnen 2-6 Scharniere 3-9, 3-19 HWSetup aufrufen 5-11 Fenster 5-11 L LAN Kabeltypen 4-21 Bluetooth Bluetooth Stack for Windows by Toshiba 5-2 Lüftungsschlitze 3-6, 3-7, 3-13, 3-17 D Do
P entfernen 4-20 installieren 4-18 Passwort beim Einschalten 5-4 Benutzer 5-8 Starten des Computers mit Passwort 5-10 Supervisor 5-10 Smart Card einsetzen 4-26 entfernen 4-27 Smartcard 4-26 Speichermedienkarte einsetzen 4-25 entfernen 4-26 Probleme Abschaltung bei Überhitzung 6-5 Akku 6-5 Analyse des Problems 6-2 Audiosystem 6-12 duales Zeigegerät 6-8 Echtzeituhr 6-6 Festplatte 6-8 Hardware- und SystemCheckliste 6-4 interner Bildschirm 6-7 Netzstrom 6-5 Speichermedien 6-8 Stromversorgung 6-5 Tastatur 6-7
TOSHIBA PC-DiagnoseTool 5-1 Touchpad 3-10, 3-20, 4-1, 6-9 Touchscreen 4-1 Transport des Computers 1-13 U Umgang mit Datenträgern Speicherkarte 4-24 Umgang mit Karten 4-24 USB-Gerät Probleme 6-10 V Video-RAM 3-23 W Webcam 3-9, 3-19 Wiederherstellungsmedien 5-18 Wiederherstellungspartition 5-19 Z Zeigegerät Touchpad 3-10, 3-20 Benutzerhandbuch Stichwortverzeichnis-3