Operation Manual

EN-15 User’s Manual
MINI 3D SOUND BAR & SUBWOOFER
5. Once the two devices are paired successfully, “connected” will be
shown on your device and the blue indicator on the sound bar will stop
flashing.
6. Then the devices have been paired, you can play music/video files on
your other device and enjoy the sound from the sound bar.
Once disconnected, you need to repeat the above steps 4~6 for re-
connection.
Pairing the sound bar with another Bluetooth
®
device
1. Disconnect your Bluetooth
®
device from the sound bar.
2. Press the Bluetooth
®
button on the sound bar until the blue indicator
flashes.
3. Turn on the Bluetooth
®
mode of your other device, and select “Toshiba
Mini 3D Sound Bar” on it for pairing.
Frequently Asked Questions (FAQ)
Question 1:
The sound bar cannot be turned on.
Answer:
Make sure that the AC adapter is connected to the sound bar, and that it is
plugged into a wall socket correctly.
Press the power button on the top of the sound bar and check whether the
power indicator is glowing green.
Question 2:
There is no sound from the sound bar.
Answer:
This problem may have several causes. Check the following items:
■ Press the Volume +/- buttons of the sound bar.
■ Make sure that the source you have selected is sending audio. If you
are connected to your TV, please make sure that your TV is configured
to output audio.
■ Make sure that there are no loose audio connections.
When pairing a new Bluetooth
®
enabled device, use the Bluetooth
®
button
on the sound bar speaker and not on the remote control. The remote
control can only be used to reconnect a previously paired device.
NOTE
For details, please refer to the user’s manual of your Bluetooth
®
device.
The sound bar can only be paired with one Bluetooth
®
device at a time. If
the sound bar is already paired with one Bluetooth
®
device, you will not be
able to pair it with another Bluetooth
®
device, even though it may display
the name “Toshiba Mini 3D Sound Bar”.
NOTE