Operation Manual

User’s Manual EN-16
MINI 3D SOUND BAR & SUBWOOFER
■ Make sure that you have selected the correct source (input).
■ Press the MUTE button on the remote control to make sure that the
sound bar is not muted.
Question 3:
There is no sound from the subwoofer.
Answer:
Make sure that the subwoofer is connected properly.
Question 4:
The remote control does not work properly.
Answer:
This problem may have several causes. Check the following items:
■ Make sure that the plastic sheet is removed before operating the
remote control.
■ The remote control is pointed directly at the remote sensor of the
sound bar.
■ The remote control is not being used from too far a distance from
sound bar.
■ Nothing is obstructing the remote sensor (located in the front of the
sound bar).
Others
Accessories of this series of products may vary depending on the model.
Please refer to the packaging, packing list or contact your agent for
information.
Please understand no advance notice for further product improvement,
appearance design and specification update.
The illustration may be a little different from the real product.
Specifications
Mini 3D Sound Bar
General Information Description
Power requirements 19V DC, 3.42A
Power output 10 watts x 4 (per channel at 4ohms, 1 KHz /
THD 10%)
Power consumption 40W
Impedance 4 ohms
Dimension (width x
height x depth)
11.4" x 2.8" x 3.9" (290 x 72 x 100mm)