Operation Manual

User’s Manual EN-8

MINI 3D SOUND BAR & SUBWOOFER

Getting Started

Check the illustrations below to setup your device properly.

Connecting the power adaptor

Choose the proper plug to attach to an AC adaptor. Plug one end of the AC

adaptor cord/cable into the DC IN jack on the back of the sound bar, and

the other end to a live electrical outlet. The power indicator on the front

panel glows green when the sound bar is powered on.

(Sample Illustration) Connecting the power cord to the AC adaptor (2-pin plug)

(Sample Illustration) Connecting the power cord to the AC adaptor (3-pin plug)

AC Adaptor

The sound bar will automatically go to the standby mode in 10 minutes if

no audio output.

NOTE