DIGITAL VIDEO DVD VIDEO PLAYER SD-100X Sep.
Introduction SAFETY PRECAUTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player. Serial No. Introduction Model No. Retain this information for future reference. Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED TOSHIBA CORPORATION 1-1,SHIBAURA 1-CHOME,MINATO-KU.
Introduction IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
. Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like. Introduction 6. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 7.
Introduction IMPORTANT SAFETY INSTRUCTIONS 12. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
18. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Introduction 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20.
Introduction Precautions Notes on handling When shipping the DVD video player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD video player. Do not leave rubber or plastic products in contact with the DVD video player for a long time. They will leave marks on the finish.
Notes on Discs Structure of disc contents Do not touch the playback side of the disc. Introduction On handling discs Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. DVD video disc DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on Discs (continued) About this owner’s manual This owner’s manual explains the basic instructions of this DVD video player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD video player may not respond to all operating commands. This is not a defect in the DVD video player. Refer to instruction notes of discs. “ ” may appear on the TV screen during operation.
Table of Contents SAFETY PRECAUTIONS .......................... 2 IMPORTANT SAFETY INSTRUCTIONS ... 4 Precautions ............................................... 8 Notes on Discs .......................................... 9 Notes on region numbers ............................... 10 Table of Contents ................................... 11 Identification of Controls ....................... 12 Front panel ..................................................... 12 Rear panel ....................................
Introduction Identification of Controls See the page in for details.
Dimmed Normal FL DIMMER Introduction Pressing of the FL DIMMER button on the remote control changes the brightness of the display. DVD display Off Total playing time/remaining time/elapsed time indicators Play mode indicator Memory playback indicator Title/track number indicator Chapter number indicator TITLE TRK CHP INDEX TOTAL REMAIN MEMORY HDCD SVCDVD Multifunctional indicator (indicates operating status or messages, etc.
Introduction Identification of Controls (continued) The instructions in this manual describe the functions on the remote control. See the page in for details.
1 Open the cover. Operating with the remote control Point the remote control at the remote sensor and press the buttons. 30° 2 Insert batteries (AA size). Introduction Loading batteries 30° Within about 7 m (23 feet) Distance: About 7 m (23 feet) from the front of the remote sensor Angle: About 30° in each direction of the front of the remote sensor Make sure to match the + and – on the batteries to the marks inside the battery compartment. 3 Close the cover.
Connections Connecting to a TV Connect the DVD video player to your TV. For details of output sound, see 33 . Connecting to a TV Signal flow AC IN VIDEO OUT VIDEO Y PB PR AUDIO OUT S To S VIDEO OUT R L ANALOG (yellow) To VIDEO OUT BITSTREAM/ PCM (red) (white) To wall outlet To ANALOG AUDIO OUT Audio/video cable (supplied) To audio inputs To video input (yellow) S video cable (not supplied) The plug is provided with parallel type pins.
Connecting to an audio system and TV equipped with ColorStream® (Component video) inputs Connections Signal flow AC IN VIDEO OUT VIDEO Y PB PR AUDIO OUT S To PR VIDEO OUT To PB VIDEO OUT To Y VIDEO OUT R L ANALOG BITSTREAM/ PCM (red) (white) To wall outlet To ANALOG AUDIO OUT To audio inputs of the amplifier To Y video input (red) (white) To PB video input To PR video input TV or monitor with component video inputs ColorStream® (Component video) outputs/inputs Some TVs or monitors are e
Connections Connecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment. For connection to your TV, see “Connecting to a TV” 16 17 . For details of output sound, see 33 .
Warning • When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the onscreen displays 35 39 . Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks.
Basic playback Playing a Disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. ON/STANDBY indicator 3 PAUSE STOP PLAY PAUSE STOP ON/STANDBY OPEN/CLOSE 1 DVD VCD CD SKIP 2 4 Basic playback Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
To obtain a higher quality picture 2 1 SETUP TOP MENU / / / ENTER MENU PAUSE/STEP 4 STOP Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD video player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Basic playback Playing a Disc (continued) You can play discs at various speeds, and resume playback from the location where you stopped playback. REV FWD PAUSE/STEP PLAY SLOW DVD VCD CD Playing in fast reverse or fast forward directions To resume normal playback Press REV or FWD during playback. REV FWD Press PLAY. PLAY REV: Fast reverse playback FWD: Fast forward playback DVD Each time you press the REV or FWD button, the playback speed changes.
DVD VCD Playing in slow-motion SLOW Press PLAY. Each time you press the SLOW button, the slow-motion speed changes. PLAY TV screen DVD VCD CD 1 1 2 1 4 1 8 1/2 the normal speed 1/4 the normal speed 1/8 the normal speed Notes • The sound is muted during slow-motion playback. • The playback speed may differ depending on the disc. Resuming playback from the same location Press STOP at the location where you want to interrupt playback.
Basic playback Locating a Specific Title, Chapter, or Track Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or track. DVD video disc Title 1 Chapter 1 Chapter 2 DVD 1 Press TOP MENU. TOP MENU Press want. ENTER DVD 1 The top menu appears on the TV screen.
TOP MENU Number buttons T ENTER / / / CLEAR PLAY SKIP DVD VCD CD Press T. Skip steps 1 and 2 if you are using a VIDEO CD/ audio CD. SEARCH Title : 1 Chapter: T 2 Press to highlight the space next to “Chapter.” ENTER 3 1 Title : 1 Chapter: 1 Press the corresponding number buttons for the chapter or track you want. 4 Press PLAY. PLAY Playback starts from the selected chapter or track.
Advanced playback Accessing a Specific Location Directly You can access a specific location by entering its corresponding time (hours, minutes, seconds). 2 1 3 DVD VCD CD 1 Entering the time of the desired location Press T twice. SEARCH T You may have to press further depending on the disc. Press the button repeatedly until the following display appears. Time 2 -:- - :- - Press the number buttons to enter the time. e.g. 1 3 26 2 5 3 0 Time 1 : 25 : 30 Press PLAY.
Playing Repeatedly You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) CLEAR PLAY REPEAT A-B RPT DVD VCD CD 1 Repeating a title, chapter, or track Press REPEAT. REPEAT Each time you press the REPEAT button, the repeat mode changes as follows. 2 Press PLAY. PLAY DVD DVD VCD CD 1 Chapter Repeat Repeats the current chapter. DVD Title Repeat VCD CD Track Repeat VCD CD All Repeat Repeats the entire disc.
Advanced playback Playing in a Favorite Order DISPLAY You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 28 selections into the memory. (Memory playback) Title: 2 Chapter: 25 Title: 2 Chapter: 12 2 2 Title: 1 Chapter: 1 / / / CLEAR 3 1 DVD VCD CD 1 Setting titles, chapters, or tracks in a favorite order Insert a disc and press MEMORY during stop. MEMORY The following display appears.
Playing in Random Order You can play titles, chapters within a title, or tracks in random order. (Random playback) Title: 1 Chapter: 3 Title: 2 Chapter: 2 CLEAR Title: 3 Chapter: 1 2 1 DVD VCD CD 1 Playing titles, chapters or tracks in random order To resume normal playback Press RANDOM. RANDOM Press CLEAR. Each time you press the RANDOM button, the random playback mode changes as follows. DVD Chapter Random Plays chapters within the current title in random order.
Advanced playback Zooming a Picture You can magnify areas within a picture. ZOOM / / / RETURN CLEAR DVD Zooming a picture Press ZOOM during normal, slow or still playback. As you repeatedly press the ZOOM button, the magnification level increases. ZOOM RETURN To reduce the magnification level, press the RETURN button. ENTER CLEAR If you press the / / / buttons, the zoom point shifts. When the zoom point reaches an edge of the picture, the color of “Zoom” changes.
Selecting the Camera Angle If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. 1, 2 2 CLEAR DVD 1 Changing the camera angle Press ANGLE while playing a scene recorded with multiple angles. ANGLE Current angle number Angle icon Press CLEAR. CLEAR To disable the angle icon display on the TV From the on-screen displays, set “On-Screen Displays” to “Off.” 40 Monitor the DVD display when you want to change the camera angle.
Advanced playback Selecting Subtitles You can display subtitles on the TV screen and select a subtitle language from those included on the DVD video disc. Good evening! DVD 1 Bonsoir! SUBTITLE / / / CLEAR ¡Buenas tardes! Selecting a subtitle language Press SUBTITLE during playback. SUBTITLE The current subtitle setting is displayed for about 3 seconds. To turn subtitles on or off 1 Press SUBTITLE during playback.
Selecting a Language You can select a preferred language and sound recording system from those included on the DVD video disc. Good morning! Bonjour! 1, 2 2 ¡Buenos días! CLEAR Selecting a playback audio setting DVD 1 Press AUDIO during playback. AUDIO The current audio setting is displayed for about 3 seconds. Press AUDIO or while the audio setting is displayed on the TV screen.
Advanced playback Viewing the Operational Information and DVD/CD-Text DISPLAY You can view information about a disc and its operational status on the TV screen. DVD VCD CD Checking the operational status Press DISPLAY during stop. Each time you press the DISPLAY button, the on-screen display appears as follows. DISPLAY DVD Current title number Current chapter number e.g. → Stop Title : 2 Chapter : 1 Operational status e.g.
Function setup Customizing the Function Settings You can change the default settings to customize performance to your preference. 1, 6 2 RETURN LANGUAGE DVD VCD CD 1 PICTURE DISPLAY AUDIO 3, 4 OPERATION Setting procedure Press SETUP during stop. SETUP The following on-screen display appears. 3 Press / to select the setting you want to change, then press ENTER.
Function setup Setting LANGUAGE PICTURE AUDIO DISPLAY OPERATION 36 Details Page On-Screen Language DVD VCD CD To select a preferred language for on-screen displays. 37 Disc Menu Language DVD To select a preferred language for disc menus. 37 Audio Language DVD To select a preferred language for the sound track. 37 Subtitle Language DVD To select a preferred language for subtitles. 37 TV Shape DVD To select a picture size according to the aspect ratio of your TV.
Customizing the Function Settings (continued) Setting details PICTURE LANGUAGE LANGUAGE On-Screen Language Disc Menu Language Audio Language Subtitle Language On-Screen Language DVD AUDIO DISPLAY OPERATION English: French: Spanish: Others: ENG ENG ENG ––– VCD CD English: To view on-screen displays in English. French: To view on-screen displays in French. Spanish: To view on-screen displays in Spanish. English: French: Spanish Others: DVD To play sound tracks in English.
Function setup Customizing the Function Settings (continued) Setting details (Continued) LANGUAGE 3) Press the / buttons to shift and select the second character by pressing the / buttons.
LANGUAGE AUDIO Audio Out Select DVD DISPLAY PICTURE AUDIO Audio Out Select Dynamic Range Control Karaoke Vocal VCD OPERATION DVD Bitstream On Off Off: The primary vocal is not output. On: The primary vocal is output when it is recorded on the disc. CD Notes • The vocal output feature is used during playback of Dolby Digital (multi-channel) recorded DVD KARAOKE discs. This feature allows you to turn off vocal audio tracks, or restore them for background accompaniment.
Function setup Customizing the Function Settings (continued) Setting details LANGUAGE DISPLAY PICTURE DISPLAY On-Screen Displays OSD Background Color Screen Saver On-Screen Displays DVD On Gray On VCD Off: Operational modes (e.g. “Play”, “ displayed. On: Operational modes (e.g. “Play”, “ displayed on-screen. OSD Background Color DVD Blue: Blue background. Gray: Gray background. Screen Saver OPERATION AUDIO DVD Off: The screen saver is disengaged. On: The screen saver operates.
1) Press the number buttons to create a personal 4-digit security code, then press ENTER. If you make a mistake before pressing the ENTER button, press the CLEAR button and enter your 4-digit security code again. 2) Press the / buttons to select the parental lock level, then press the ENTER button. USA Locked Viewable You cannot play DVD video discs rated higher than the level you selected unless you cancel the parental lock function.
Others Table of Languages Table of languages and their abbreviations Abbreviation ––– CHI (ZH) DUT (NL) ENG (EN) FRE (FR) GER (DE) ITA (IT) JPN (JA) KOR (KO) MAY (MS) SPA (ES) AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD GL 42 Language No alternate language Chinese Dutch English French German Italian Japanese Korean Malay Spanish Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Belorussian Bulgarian Bihari Bislama Bengali
Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom Cause Correction No power. • The power plug is disconnected. • Connect the power plug securely into the wall outlet. 16 The DVD video player turned off by itself. • The automatic power off function turned the unit off. • Press the PLAY button. 21 No picture. • The TV is not set to receive DVD signal output.
Others Specifications DVD video player / outputs / supplied accessories DVD Video Player Power supply 100 – 240 V AC, 50/60 Hz Power consumption 14 W Mass 3.0 kg External dimensions 430 × 81 × 305 mm (W/H/D) Signal system Standard NTSC Laser Semiconductor laser, wavelength 650 nm Frequency range DVD linear sound : Signal-to-noise ratio More than 112 dB Audio dynamic range More than 105 dB Harmonic distortion Less than 0.002 % Wow and flutter Below measurable level (less than ±0.
