Operation Manual

13
SCART-cable (not supplied)
If a Satellite Receiver is used, we recommend the following configuration:
Connection to a Satellite Receiver
Playback connection
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for the
location of SCART socket.
To view TV-program from Satellite Receiver, press AUX on the remote control of DVD/VCR repeatedly
until "L1" appears on the front display.
To record TV-program from Satellite Receiver, press VCR/DVD to select the VCR mode. Then load a
blank cassette tape with the erase prevention tab intact and select the desired TV-program. And follow
steps 3~4 on page 29.
Connection to a Decoder (for Premiere Programs)
Satellite
Antenna
Satellite
Receiver
DVD/VCR
TV
SCART-cable (not
supplied)
SCART-cable (not supplied)
DVD/VCR
Cable TV-
connection
SCART-cable (not supplied)
RF-Output
TV-unit
Decoder
Note: Make sure that AV2 - mode in SYSTEM SETUP - menu has been set to “DEC”.
2J50301A [EN] P08-13 3/22/06, 8:10 PM13