Operation Manual

53
In the file browser, press B/A or C/D to
select “Edit Mode”, then press ENTER.
When “Edit Mode” is black colour,
you can mark the files which you
want to add into Program list.
Press B/A or C/D to select the file you want
to add into the program list.
Press ENTER. Selected file was
marked.
Repeat this procedure to select
the other files.
Press B/A or C/D to select “Add To
Program”.
Then press ENTER. All marked files are
added into the program list.
•When you finish storing all the
files you want into the Program
list, select “Edit Mode” again and
press ENTER to release edit
mode.
Folder-1
Folder-2
MP3-1
MP3-2
MP3 3
Repeat :Off
Mode :Off
Edit Mode
Program playback (CD)
Press C/D to select “Program View”, then
press ENTER. Program View shows only the
programed files that you have added at step
2.
Browser View
In the Program View, press PLAY. The files
start to playback in programmed order that
were added by you.
To remove file from program list
In the Edit Mode, switch to Program View.
Select the files you want to remove in stop mode,
then press ENTER. Select “Clear Program” and
press ENTER.
Marked file is removed from program list.
1
2
3
4
5
MP3-1
MP3-2
MP3-3
MP3-4
JPEG Preview
Edit Mode
Browser View
Clear Program
Program View
Repeat and program playback using file browser
2J50301A [EN] P46-53 3/22/06, 8:12 PM53