Operation Manual

57
Parental control setting
Some discs are specified is not suitable for children.
Such discs can be limited not to playback with the unit.
1) Press C or D to select “Parental”, then press
ENTER. “Enter Password” screen will appear.
2) Press “0000” using Number buttons (0–9).
(Please note, this is pre-setting password of this
unit). Then press ENTER. The parental level list
will appear.
Level Off: The parental control setting does not
function.
Level 8: Virtually all DVD software can be
played back.
Level 1: DVD software for adults cannot be
played back.
3) Press C or D to select from the level 1 to level 8.
The limitation will be more severe as the level
number is lower. Then press ENTER.
4) Press OPEN/CLOSE to activate Parental control
setting.
Notes:
Depending on the discs, the unit cannot limit
playback.
Some discs may not be encoded with specific
rating level information though its disc jacket says
“adult. For those discs, the age restriction will not
work.
The password is required every time when you
change the parental level.
If you input a wrong number, press CLEAR.
Set the new password
1) Press C or D to select “Password”, then press
ENTER. “Enter Current Password” screen will
appear.
2) Press Number buttons (0–9) to input the current
password (If the password has not been set yet
after you purchase this unit, it is “0000”).
3) Then press ENTER. “Enter New Password” screen
will appear. Press Number buttons (0–9) to input
the new password.
4) Press ENTER. Now your new password has been
set. Be sure to remember this number!
Customizing the function settings
QSound
This DVD video player equipped with a “QSound”. It can
produce the effect of being in a cinema or a concert hall.
Off: The QSound is disengaged.
On: The QSound operates.
Off:
It plays back at the recording level on the disc.
On:
Loud sound such as explosion is toned down
slightly when played back. This is suitable when it
is connected to a stereo.
Notes:
This function works only during playback of Dolby Digital
recorded discs.
The level of Dynamic Range Reduction may differ
depending on DVD video disc.
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Notes:
The QSound setting can also be changed with AUDIO
on the remote control (see page 46).
This function works only when the disc recorded with
Dolby Digital is played back.
When this function works, the volume might changed.
When the voice is distorted, turn off QSound.
Parental : Off
Set Password
Output : Interlace
DivX(R) VOD
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
DRC : Off
QSound : Off
Setting details
2J50301A [EN] P54-58 3/22/06, 8:12 PM57