Manual

Playing a DVD and Video CD
[]Playback Setup ql_ _
• Turn on the TV and select the video input source con-
nected to the DVD player.
• Audio system: Turn on the audio system and select
the input source connected to the DVD player.
Press OPEN/CLOSE to open the disc tray.
General Features
_'_ Note
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup menu.
Moving to another TITLE
Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a disc menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
,l. ,lJ
Use the _ _ buttons to select the title/chapter
and additional selections you want, then press ENTER
to start playback.
Press TOP MENU or MENU to return to the disc menu
screen.
• Use the number buttons to select the track you want
to view.
Press RETURN to return to the disc menu screen.
• Menu setting and the exact operating procedures for
using the disc menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
14.
[]Notes
- if Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 15).
- DVDs may have a region code.
- Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
When a disc has more than one title, you can move to
another title as follows:
• Press GUI DISPLAY when playback is stopped.
From the title function, press the appropriate num-
bered button (0-9) to select a title number.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
• Press SKIP _ or _ briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
• Press _ twice briefly to step back to the previous
chapter/track.
• To go directly to any chapter during DVD playback,
press GUI DISPLAY. Then, press _ to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9).
[]Note
For two-digit numbers, press the buttons in rapid
succession.
Slow Motion _ _
1 Press SLOW <1 or I1_ during playback.
The player willenter SLOW mode.
2 Use the SLOW <1 or I1_to select the required speed:
<1 1/16, <! 1/8, <1 1/4 or <l 1/2 (reverse), or I1_
1/16, I1_ 1/8, 11_1/4 or II_ 1/2 (forward).
3 To exit slow motion mode, press PLAY.
_J Note
Slow motion playback in reverse is not applicable for
Video CD.
:i:i:i:i'_
iii !ii ii:i i!iiiI i