Operation Manual
33
Timer recording
5
--:--
--:-------- --
13:00 14:30 1
23
MON
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
------ --:-- --:-- --
------ --:-- --:-- --
-
-
-
-
-
LP
-
-
SELECT :
EXIT
: MENU
/ ENTER
1
2
4
3
TIMER REC SET
DATE
WKL-WED
11:30
--:--
2
START
END
CH
SELECT :
SET :
/0—9
EXIT
: MENU
SP
SPEED
OFF
VPS/PDC
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
25 WED
12:15 13:00 4
23 MON
13:00 14:30 1
-
-
-
-
-
LP
SP
SELECT : / ENTER
--:--
--:-------- --
-
EXIT
: MENU
6
Press ENTER to accept them.
To enter other pro-
grams, repeat steps
2 through 5.
• To return to the
normal screen,
press VCR MENU
twice.
MON-SAT = everyday from
Monday to Saturday
WKL-SAT = each Saturday
Press TIMER REC. The clock symbol ( ) will
appear on the display and the DVD/VCR stands by
for recording. At the same time, VCR mode will
change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
• If the clock symbol (
) blinks on the display in
spite of the pressing of TIMER REC, the cassette
may not have been loaded yet. (see page 23)
• If the cassette is ejected in spite of the pressing
of TIMER REC, the erase prevention tab of the
cassette may have been removed. (see page 23)
Notes:
• In case of the timer recording from the scart socket,
proceed as follows: In step 4, press
or repeatedly
until the "CH" line blinks. Then press or repeat-
edly until “AV1” or “AV2” or “AV3” appears.
• If the clock symbol (
) blinks when the timer recording
ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
TIMER REC to cancel the timer program or press
EJECT on the DVD/VCR to remove the cassette tape.
• During timer recording standby mode, the VCR mode
cannot be selected. To use the VCR, press TIMER
REC at first, then press VCR to change to VCR mode.
Press TIMER REC again to set the VCR into timer
recording standby mode.
Timer Recording Special Case
Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure for timer recording on page 32. At
picture 3, press
or repeatedly until the desired
setting appears. Then press . When you press or
repeatedly, the indicator at DATE will change as
follows, in case today is Friday.
In case of Timer programs-overlapping
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as
shown in the diagram below.
If you set up many timer recording programs at the
same start time, the priority will be the top program in
the timer recording list.
Notes:
• The daily/weekly recording can be made continuously
until the recording is cancelled or the tape reaches the
end.
• During timer recording, the automatic rewinding mecha-
nism does not function.
Confirmation / Cancellation of the Timer
Recording
If the Timer has been activated, press TIMER REC
to deactivate the Timer. The clock symbol ( ) will
disappear. Then press VCR to change to VCR
mode.
Press PROGRAM. All the 8 Timer memories will
appear.
To cancel Timer program: Press or to select
the written line. Then press CANCEL. This line is
now cancelled.
One month later
minus one day
SUN-SAT 25 FRI ..... 24 SUN WKL-FRI
MON-SAT MON-FRI WKL-THU.....WKL-SAT
8 : 00
11 : 00
9 : 00
10 : 00
Program 1
Program 2
Program 3
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Recording
Control Settings
Press VCR MENU (or PROGRAM) repeatedly until
the TV-picture appears.
2K20301A [EN] P29-37 2/12/07, 4:03 PM33