Manual

Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD player to a 6 channel amplifier equipped
with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro
Logic Surround decoder, you will obtain the full benefit of Pro Logic from the
same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well
as from titles with the Dolby Surround mark.
Amplifier equipped with a _'
Dolby Digital decoder
ToOPT,CALToCOAX,AL
type digital _IJV type digital Connect either. _ 0
audio input /! audio input 75 , coaxial cable J /
Optical digital cable J
!
o
O
• Manufactured under license from Dolby ]
Laboratories. "Dolby", "Pro Logic" and )
the double-D symbol are trademarks of _7,.
Dolby Laboratories. Confidential 5
unpublished works. @1992-1997Dolby
• Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display Select: Page
"Audio Out Select.... Bitstream" [_
Recordingsystem I-]['1 D [_
Connecting to an amplifier equipped with Dolby Pro Logic Surround
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an
amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's
owner's manual and set the amplifier so you can enjoy Dolby Pro Logic
Surround sound.
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with _ - _"
To audio input
To 2CH AUDtO OUT
Audio cable
Make the following setting.
On-screen display Select: Page
"Bitstream" 5[_
"Audio Out Select" or
"PCM" [_
Be sure to set "Audio Out Select"
to "Bitstream" or "PCM" when
you enjoy sounds of Dolby Pro
Logic Surround using this
connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.