Manual

3) Select "Test Tone" and press the ENTER
button.
The DVD player outputs a test signal to each
speaker when it is in stop mode. When playing
a DVD video disc, it substitutes the current
sound for the test signal.
Move the cursor control (< / I_) to select the
receiving speakers, and adjust the volume of
each speaker at the same level by moving the
cursor control (A / V).
If all the volume levels cannot be equalized,
adjust them on the amplifier.
Note
Depending on the disc, 6 channel sounds may not be
output via the 5.! CH SURROUND AUDIO OUT jacks.
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD disc.
Off: The primary vocal is not output.
On: The primary vocal is output when it is recorded
on the disc.
Notes
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD player.
HDCD enhances the output sound level of audio CD
by approximately 6 dB. As such, distortion may occur
in some connected products that are unable to
compensate for a wide range of input signal levels.
(e.g. TV, stereo receivers)
Off: For normal use.
On: Select when an HDCD sound is distorted. Sound
volume of an HDCD is lessened.
Language
p_HO
D;scMenu LaaguageENG
Aud;oLaaguage ENG
subtitleLaaguage -- -
English: To view on-screen displays in English.
Fran£ais:To view on-screen displays in French.
EspaSol: To view on-screen displays in Spanish.
English: To display disc menus in English.
French: To display disc menus in French.
Spanish: To display disc menus in Spanish.
Others: To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
1) Obtain the abbreviation of the preferred
language from the list [_.
2) Select the first character by moving the cursor
control (A / V).
3) Move the cursor control (< / I_) to shift and
select the second character by moving the
cursor control (A / V).
Laaguoge
On-Screen_nguage ENG
m_mm_t_ag,+,me_ r_n_h
AudioLanguage ENG S_nish
SubtitleLanguage ---
4) Press the ENTER button.
Note
Some DVD video discs may not include your pre-
selected language. In this case, the DVD player
automatically displays disc menus consistent with the
disc's initial language setting.
"11