00873A-SD-6980SY-Cover 8/22/05 4:42 PM Page 3 DVD VIDEO PLAYER SD-6980SY OWNER’S MANUAL C 2005 Toshiba Corporation
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 2 Introduction Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 3 Introduction Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 4 Introduction Note: • This unit can be used only where the power supply is AC 110~240V, 60/50Hz. It cannot be used elsewhere. Notes on Regional Codes • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player’s regional code or the disc cannot play. • If you try to play a DVD with a different region code from your player, the message “Check Regional Code” appears on the TV screen.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 5 Introduction • Before connecting other components to this player, be sure to turn them all off. • Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged. • Do not put a flower vase filled with water or any small metal objects on the player. • Be careful not to put your hand into the disc tray. • Do not place anything other than the disc in the disc tray.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 6 Introduction Before you start Accessories Remote Control Batteries for Remote Control (AA Size) User’s Manual Install Batteries in the Remote control Video/Audio Cable HDMI-HDMI Cable Operating with the remote control 1 Point the remote control at the remote sensor and press the buttons. Open the battery cover on the back of the remote control. 30º 30º Within approx. 7m(23 feet) 2 Insert two AA batteries.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 7 Introduction Table of Contents Introduction Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Table of Contents . . . . . . . . . . . . . . . . .
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 8 Introduction General Features Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(16:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion. Program Play (CD) You can program tracks to play in desired order.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 9 Introduction This manual provides information on the operation and maintenance of your DVD Home Theater System. Should the unit require service, contact an authorized service location. Notes on Discs HANDLING DISCS Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 10 Introduction Type of Playable Discs This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types DVD-VIDEO Audio + Video VIDEO-CD Audio + Video Disc Size Max. Playing Time 5" Single-sided 240 min. Double-sided 480 min. 31/2" Single-sided 80 min. Double-sided 160 min. 5" 74 min. - DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 11 Introduction Introduction Front Panel 9 10 1 2 3 4 1. ON/STANDBY( ) Use to turn your player on and off (standby). 2. POWER Indicator This indicator will lights up when the power is on. 3. DISC TRAY Place the disc here. 4. 5 6 7. SKIP ( ) / SEARCH - Use to reverse skip a scene or music. - Press and hold to search backward. 8. SKIP ( ) / SEARCH - Use to forward skip a scene or music. - Press and hold to search forward.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 12 Introduction Rear Panel 2 1 2 7 3 1. 5.1CH ANALOG AUDIO OUT JACKS - Connect to an amplifier with 5.1ch analog input jacks. 2. DIGITAL AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. - Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. 3.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 13 Introduction 7. 19 1 8. 9. 10. 11. 2 20 21 22 23 24 3 4 5 6 12. 13. 14. 15. 25 7 8 9 10 11 12 13 26 27 28 16. 17. 18. 19. 29 20. 21. 14 15 16 30 31 32 22. 17 18 33 34 24. 25. 23. 26. 27. 28. 29. 1. 2. 3. 4. 5. 6. OPEN/CLOSE ( ) Button To open and close the disc tray. NUMBER Buttons INPUT Button Selects Video input connection in TV mode. DVD Button Press this to operate DVD Player. TV Button Press this to operate TV. (Go to TV mode.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 14 Connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 15 Connections Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. 1 Using an S-Video cable (not supplied), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 16 Connections Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate colour reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 17 Connections Connection to a TV (Progressive) 1 Using component video cables (not supplied), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV. RED Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 18 Connections Connecting to a TV with HDMI Jack 1 Using the HDMI cable, connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV. 2 Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen. HDMI cable HDMI VIDEO Specifications When you press the HDMI button, 576p, 720p and 1080i are selected in order.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 19 Connections • HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. • HDMI connection description HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 20 Connections Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN terminal of your TV as described on pages 14 to 18.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 21 Connections Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifer) 1 Connections If using an optical cable (not supplied), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not supplied), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 22 Connections Connection to a 5.1CH Analog Amplifier 1 If using audio cables for 5.1 CH Analog Amplifier (not supplied) connect the 5.1CH ANALOG AUDIO OUT terminals on the rear of the DVD player to the 5.1CH ANALOG AUDIO IN terminals of the 5.1CH Analog Amplifier.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 23 Basic Functions Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input on the TV's remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. Press Touche Drücken Sie Pulsar 1 for English 2 pour Français 3 für Deutsch 4 para Español Premere 5 per Italiano Druk op 6 voor Nederlands Playback 1 Press the OPEN/CLOSE ( ) button.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 24 Basic Functions 4 Stopping Play Press the STOP ( ) button during play. Note - If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. (Automatic Power-Off Function) 5 Removing Disc Press the OPEN/CLOSE ( ) button.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 25 Basic Functions Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track ▼ During play, press the SEARCH ( or ) button on the remote control for more than 1 second. During play, press the SEARCH ( or ) button and press again to search at a faster speed.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 26 Basic Functions Using the Display Function When Playing a DVD/VCD/CD/MPEG4 ▼ You can select Info in the function menu by pressing the MENU button. ▼ When VCD2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton. 1 During play, press the DISPLAY button on the remote control. 2 DVD Press the …/† buttons to select the desired item. 01 01 0:00:13 ENG 5.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 27 Basic Functions ▼ 3 Press the œ/√ buttons to make the desired setup and then press the ENTER button. You may use the number buttons on the remote control to directly access a title, chapter or to start the playback from a desired time. 4 To make the screen disappear, press the DISPLAY button again. To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 28 Basic Functions Using the Disc and Title Menu Using the Disc Menu (DVD) 1 During the playback of a DVD disc, press the SETUP button on the remote control. 2 Press the …/† buttons to select Disc Menu, then press the √ or ENTER button. Press ENTER key for Disc Menu Note - Depending on a disc, the Disc Menu may not work. - You can also use the Disc Menu, using the DISC MENU button on the remote control.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 29 Basic Functions Using the Function Menu Using the Function Menu (DVD/VCD) 1 Press the SETUP button during playback. 2 Press the …/† buttons to select one of the six functions. Then press the √ or ENTER button to access the function. Zoom Bookmark Repeat Angle Front Display : Bright ▼ 3 Info Basic Functions Press the …/† buttons to select Function, then press the √ or ENTER button.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 30 Basic Functions Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. When playing a DVD/VCD/CD 1 Press the REPEAT button on the remote control. Repeat screen appears. ▼ 2 DVD Press the œ/√ buttons to select Chapter, Title or A-B, then press the ENTER button.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 31 Basic Functions Slow Repeat Play This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely. When playing a DVD/VCD 1 During play, press the PLAY/PAUSE ( ) button. Basic Functions 2 Press the SEARCH ( ) button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE or STEP mode. 3 Press the REPEAT button on the remote control.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 32 Basic Functions Program Play & Random Play Program Play (CD) Program Play allows you to select the order in which you want tracks to play. 1 During play, press the PROGRAM button. 2 Press the œ/√ buttons to select PROGRAM. Press the ENTER button. PROGRAM œ√ RANDOM ▼ 3 Press the …/†/œ/√ buttons to select the first track to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 33 Advanced Functions Selecting the Audio Language You can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button (DVD/VCD/CD) 1 Press the AUDIO button. The Audio changes when the button is pressed repeatedly. - The audio languages are represented by abbreviations. DVD ENG DOLBY DIGITAL 5.1CH When playing a VCD or CD, you can select among Stereo, Right or Left.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 34 Advanced Functions Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD/MPEG4) 1 Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations. DVD Off SUBTITLE MPEG4 Press the œ/√ √ buttons to select the desired subtitle language on a MPEG4 then press the ENTER .
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 35 Advanced Functions Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the Angle Function (DVD) If the disc contains multiple angles, the ANGLE appears on the screen. 1 During play or pause mode, press the SETUP button on the remote control. 2 Info Press the …/† † buttons to select Function, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 36 Advanced Functions Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. Press the REPLAY button. - The current scene moves backward about 10 seconds, and plays back. Using the Instant Skip function (DVD) Use this function to skip playback about 10 seconds ahead of the current scene. Press the SKIP button. - Playback will skip ahead 10 seconds.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 37 Advanced Functions Using the Marker Function This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time. Using the Marker Function (DVD/VCD) 1 During play, press the MARKER button on the remote control. Using the SETUP button. During play, press the SETUP button on the remote control. Press the …/† † buttons to select Function, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 38 Advanced Functions Recalling a Marked Scene 1 During play, press the MARKER button on the remote control. 2 Press the œ/√ buttons to select a marked scene. 3 Press the PLAY/PAUSE ( ) button to skip to the marked scene. Clearing a Marker 1 During play, press the MARKER button on the remote control. 2 Press the œ/√ buttons to select the bookmark number you want to delete. 3 Press the CLEAR button to delete a bookmark number.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 39 Advanced Functions Using the Zoom Function Using the Zoom Function (DVD/VCD) 1 During play, press the ZOOM button on the remote control. Using the SETUP button. During play or pause mode, press the SETUP button on the remote control. Press the …/† † buttons to select Function, then press the √ or ENTER button. Info Zoom Bookmark Repeat Angle Front Display : Bright † buttons to Press the …/† select Zoom, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 5:38 PM Page 40 Advanced Functions How to insert a Memory Card This unit accepts 11 different types of Memory Cards Insert the Memory Card correctly with the label facing up, otherwise it may not work.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 41 Advanced Functions DVD AUDIO Playback 1 Open the disc tray. Place the DVD AUDIO disc on the tray. - Place the DVD AUDIO disc with the labeled side up. Close the tray. - The tray closes and disc plays. ▼ You can select Info in the function menu by pressing the MENU button. ▼ You may use the number buttons on the remote control to directly access a Group, Track, Page or to start the playback from the desired time.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 42 Advanced Functions Note Most DVD AUDIO discs are recorded in Groups. You can change Groups with this Function. Bonus Group playback. Some DVD AUDIO discs have Bonus groups. If you want to play a Bonus group, you must enter the Bonus Group code. The code is usually on the DVD AUDIO disc case. To access the desired Track when there is more than one on the DVD AUDIO disc. If pages are included on the DVD-AUDIO disc, you can see this icon.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 43 Advanced Functions REPEAT Play 1 Press the REPEAT button on the remote control. Repeat screen appears. Track ( ): repeats the title that is playing. Group ( ): repeats the group that is playing. ▼ Press the œ/√ buttons to select Track or Group, then press the ENTER button. ▼ 2 - LPCM : Linear Pulse Code Modulation. Not compressed Audio data format. - PPCM : Packet Pulse Code Modulation. Lossless compressed Audio data format.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 44 Advanced Functions Super Audio CD Playback 1 Off Open the disc tray. Place the Super Audio CD disc on the tray. - Place the Super Audio CD disc with the labelled side up. Close the tray. - The tray closes and you should get a screen. Super Audio CD Clips Menu On Play Function 1 Use the …/† buttons to select a music title. ▼ 2 Press the ENTER button to begin playback of the music title.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 45 Advanced Functions Super Audio CD Clips Menu Off Play Function 1 In Stop mode, press the DISC MENU button until the Clips menu is off. ▼ You can select Info in the function menu by pressing the SETUP button. ▼ 2 You may use the number buttons on the remote control to directly access a track and to start the playback from the desired time. During play, press the DISPLAY button on the remote control. 3 Press the …/† buttons to select the desired item.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 46 Advanced Functions CD Layer Play Function 1 During Super Audio CD playback, press the SACD/CD button to playback the CD layer of a dual layer Super Audio CD disc. (Refer to the page 26 for setting CD playback Function). 01 0:00:13 Note - Some Super Audio CD discs do not include a CD layer. - Depending on a disc, this function may not work. - Super Audio CD, SA-CD and their logos are trademaks of Sony and Philips.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 47 Advanced Functions Clips Menu for MP3/JPEG/MPEG4 Discs with MP3/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into folders as shown below. They are similar to how you use your computer to put files into different folders. Open the disc tray. Place the disc on the tray. Close the tray. The tray closes and this screen displays.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 48 Advanced Functions MP3 Playback 1 Open the disc tray. Place the disc on the tray. Close the tray. Off ROOT ROOT JPEG MP3 MPEG4 2 Press the …/† † or œ/√ buttons to select a song file. Press ENTER to begin playback of the song file. Off 00:00:23 B e c a u s e Yo u RO OO O TT R R . .
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 49 Advanced Functions MP3 file When you record MP3 file on CD-R/Memory Card, please refer to the following. - Your MP3 files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 file are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used. Memory Card over 4GB use FAT32, which may not be compatible with this unit. - When naming your MP3 file, do not exceed 8 characters, and enter “.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 50 Advanced Functions MPEG4 Playback MPEG4 Play Function AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played. 1 Open the disc tray. Place the disc on the tray. Close the tray. Off ROOT ROOT W J PMEAG J MPPE3G MP3 EG4 MPEG4 2 Press the …/† † or œ/√ buttons to select an avi file (DivX/XviD), then press the ENTER button. Off ROOT R . .
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 51 Advanced Functions MPEG4 Function Description Function Description During play, press the or Skip button, it moves forward ( or ) or backward 5 minutes. During play, press the SEARCH ( or ) button and press Search again to search at a faster ( or ) speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X) Allows you to search at a Slow Motion slower speed in an AVI file.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 52 Advanced Functions Picture CD Playback Off 1 Select the desired folder. ROOT ROOT JPEG MP3 MPEG4 2 Off Press the …/† † buttons to select a Picture file in the clips menu and then press the ENTER button. ROOT .. JPEG 1 MP3 2 MPEG4 3 3 Note - If no button on the remote control is pressed in about 10 seconds, the menu will disappear. ENTER RETURN Press the DISPLAY button to display the menu.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 53 Advanced Functions Picture CD Playback for HD-JPEG Must connect to HDMI. Resolution should be 720p or 1080i, and HD-JPEG should be in HD mode. (See page 64 to 66) 1 Set the HD-JPEG to HD from Setup menu. (See page 64 to 66) HDMI SETUP Resolution setting : Auto Resolution : 1080i Format : RGB-Normal HD-JPEG : SD ▼ To exit the setup menu, press the SETUP button. ▼ Press the STOP ( ) button to return to the clips menu.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 54 Advanced Functions JPEG Discs When playing a CD-R/Memory Card/Picture CD - Only files with the “.jpg” and “.JPG” extensions can be played. - If the disc is not closed, it will take longer time to start play and not all of the recorded files may be played. - Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played. - Some memory cards may not be perfomed correctly.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 55 Changing Setup Menu Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level or even adjust the player to the type of television screen you have. 1 With the unit in Stop mode, press the SETUP button on the remote control. Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 56 Changing Setup Menu Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Player Menu Language 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 57 Changing Setup Menu Using the Disc Menu Language This function changes the text language only on the disc menu screens. 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 58 Changing Setup Menu Using the Audio Language 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 59 Changing Setup Menu Using the Subtitle Language 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 60 Changing Setup Menu Setting Up the Audio Options Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use. 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 61 Changing Setup Menu Œ Dolby/DTS Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output. Select Bitstream when connecting to a Dolby Digital and DTS Decoder. ´ MPEG-2 Digital Out - PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs. - Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH). Select Bitstream when using the Digital Audio Output.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 62 Changing Setup Menu Surround Sound Speaker Setup 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 63 Changing Setup Menu The default settings : FRONT L, R (Small), CENTER (Small), SURROUND SL, SR (Small). Select the size of the speakers to be connected. Œ Front (FL, FR) - Large: Normally select this. - Small: When the sound distorts or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 64 Changing Setup Menu Setting Up the Display Options Display options enable you to set various video functions of the player. 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/23/05 4:47 PM Page 65 Changing Setup Menu Œ TV Aspect Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). - 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. - 4:3 Pan & Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 66 Changing Setup Menu Ø HDMI This setting can only be used when the unit is connected by HDMI to Display devices (TV, Projector, etc.), otherwise the HDMI setting cannot be selected. - Resolution setting • Auto : Resolution setting automatically • Manual : Resolution setting manually - Resolution • 480p/576p : 720X480, 720X576 • 720p : 1280 x 720 • 1080i : 1920 x 1080 - Format You can use this function to set HDMI output's digital data RGB range.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 67 Changing Setup Menu Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 68 Changing Setup Menu Setting Up the Rating Level 1 With the unit in Stop mode, press the SETUP button. Press the …/† † buttons to select Setup, then press the √ or ENTER button. 2 Press the …/† † buttons to select Parental Setup, then press the √ or ENTER button. Language Setup √ Audio Setup √ Display Setup √ Parental Setup : √ DivX(R) Registration √ Setup 3 PASSWORD CHECK Enter your password.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 69 Changing Setup Menu Changing the Password 1 With the unit in Stop mode, press the SETUP button. 2 Press the …/† † buttons to select Setup, then press the √ or ENTER button. Language Setup √ Audio Setup √ Display Setup √ Parental Setup : √ DivX(R) Registration √ Language Setup √ Audio Setup √ Display Setup √ Parental Setup : √ DivX(R) Registration √ Setup 3 Press the …/† † buttons to select Parental Setup, then press the √ or ENTER button.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 70 Reference Controlling a TV with the Remote Control The remote control can be compatible with various brands of TV by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs. Setting Control Codes 1. Press TV to set the remote control operating your TV. 2. While holding down PROGRAM button, enter the four diglts of your TV’s brand code (listed right) using number buttons. 3. Release PROGRAM. 4.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 71 Reference Table of Brand Codes Brand name TOSHIBA AIWA AKAI BAIRD BANG &OLUFSEN BEKO BLAUPUNKT BRIONVEGA BUSH 0071 CROWN DANSAI DEAWOO DECCA FERGUSON FINLUX FISHER FUNAI GEC GOLDSTAR GOODMANS GRANADA GRUNDIG HINARI HITACHI INNO HIT ITT ITT-NOKIA JVC LOEWE OPTA LUXOR MAGNAVOX MARANTZ MATSUI METZ MITSUBISHI NATIONAL NOKIA NORDMENDE OCEANIC Brand code 0001 0071 0211 0571 0921 0201 0241 0311 0431 0501 0521 0641 0171 0241 0471 0181 0071 0321 0331 0461 0471 0651 050
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 72 Reference Troubleshooting Before requesting service (troubleshooting), please check the following. Action Problem No operations can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of not more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 73 Reference Problem No HDMI output. Action Page • Check the Video output is HDMI enabled. • Check the connection between the TV and the HDMI jack of DVD player. • See if the TV supports this 480p/720p/1080i DVD player. P18~19, P66 Abnormal HDMI output screen. • If snow noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection). P18~19 HDMI output jitters. • Check your TV system setup.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 74 Reference Specifications General Power Requirements AC 110-240V 60/50Hz Power Consumption 14 W Weight 5.1 lbs Dimensions Operating Temperature Range Operating Humidity Range DVD (DIGITAL VERSATILE DISC) Disc Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. CD : 8Cm (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 75 Memo Reference ENG-75
00873A-SD-6980SY-Cover 8/22/05 4:42 PM Page 2 SmartMedia is a trademark of Toshiba Corp. Toshiba is an authorized licensee of the Compact Flash® registered trademark. SD is a trademark of SD Card Association. MMC and MultiMedia Card are trademarks of Infineon Technologies AG and licensed to MMCA (MultiMediaCard Association). Memory Stick is a trademark of Sony Corporation.