Introduction Basic playback 2 17 DIGITAL VIDEO PORTABLE DVD PLAYER SD-P1400 OWNER’S MANUAL Advanced playback Function setup Connections Others © 2003 TOSHIBA CORPORATION 31 45 53 65
Introduction SAFETY PRECAUTIONS CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location see service procedure. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
In the spaces provided below, record the Model and Serial No. located on the bottom of your DVD player. Model No. Serial No. Introduction Retain this information for future reference. Location of the required label 3A 3 SD-P1400_E_P02-16 3 04.4.
Introduction IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
23. Do not use this product while walking or driving. Neglecting this may cause a traffic accident. h) Always confirm that the battery pack is compatible with your player, before attaching the battery pack to the player. 24. Should the LCD monitor be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your mouth, wash it out and consult your doctor.
Introduction IMPORTANT SAFETY INSTRUCTIONS c) Do not charge, heat, open, or short-circuit the batteries. Do not throw the batteries into a fire. d) Do not leave a dead or exhausted battery in the remote control. e) If you do not use the remote control for a long period of time, remove the battery to avoid possible damage from battery corrosion. 27.After unpacking coin-shaped batteries, store them in poly bags, etc. separately one by one when unused.
Precautions Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use the player in a place subject to vibration. Neglecting this may cause malfunction of the player or damage to the disc. Do not leave the player in a vehicle. Rise or drop in temperature may result in malfunction of the player. When transporting the player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packaged at the factory.
Introduction Notes and Information Structure of disc contents On cleaning discs Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs/audio CDs are divided into tracks. Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.
This owner’s manual explains the basic instructions of this player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the player may not respond to all operating commands. This is not a defect in the player. Refer to instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the operation is not permitted by the player or the disc. Playable discs This player can play the following discs.
Introduction Notes and Information (continued) Exemptions Toshiba Corporation is not liable for any damage caused by fire, natural disaster (such as thunder, earthquake), acts by third parties, accidents, owner’s intentional or unintentional misuse, or uses in other improper conditions. Toshiba Corporation is not liable for incidental damages (such as profit loss or interruption in business, etc.) caused by use or inability to use of this player.
Table of Contents SAFETY PRECAUTIONS .......................... 2 IMPORTANT SAFETY INSTRUCTIONS ... 4 Precautions ............................................... 7 Notes and Information ............................. 8 Notes on region numbers ................................. 9 Table of Contents ................................... 11 Identification of Controls ....................... 12 Main unit ......................................................... 12 Side view ........................................
Introduction Identification of Controls See the page in for details. Main unit LCD monitor Press the open switch to open the LCD monitor.
Introduction Side view DC IN jack 16 Volume control 20 Headphone jack 1 56 Headphone jack 2 56 Power switch 18 20 S VIDEO jack 54 AV OUT jack 54 BITSTREAM/PCM jack 58 59 60 Rear view LCD/AV OUT SELECT switch 54 • Normally place it in the “LCD” position.
Introduction Identification of Controls (continued) The instructions in this manual describe the functions of the remote control. See the page in for details.
1 While pushing the holder in direction 1 , simultaneously slide it out in direction 2 . Operating with the remote control Introduction Loading the remote control battery Point the remote control at the remote sensor on the player and press the buttons. 1 Backside 2 Within about 3 m (9.9 feet) 2 Place a coin-shaped battery (CR2025) with the side up on the holder. 25 20 CR 3V Keep the holder horizontal so that the battery does not fall through. 3 Push the holder back into its receptacle.
Introduction Power Connection Connect the supplied AC adapter to power the player. For mobile use, the battery pack (supplied) is also available. When using the battery pack, follow the instructions on page 61 . Caution • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
Basic playback Begin your operation. Playing a Disc Variable Speed Playback Locating a Specific Title, Chapter, or Track Playing MP3/WMA Files Viewing JPEG Files About this manual • The numbers indicated by lines on the illustrations correspond to the associated steps of the operation. • Aside from the section “Playing a Disc”, explanations of operations only include illustrations of the corresponding buttons on the remote control.
Basic playback Playing a Disc This section shows you the basics on how to play a disc. indicates a reference page of this manual. See the page in for details. DVD-V VCD CD CAUTION • Keep your fingers clear of the disc as it is spinning. Neglecting to may cause serious personal injury. • Be careful not to catch your fingers in the disc holder. • Do not use a cracked, deformed, or repaired disc. • Do not tilt, shake or move the main unit while playing. It may damage the disc.
TOP MENU MENU SETUP / / / ENTER 5 STOP To obtain a higher quality picture (When connected to a TV) Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this player, you should generally reduce the sharpness adjustment on the connected TV when viewing DVD video discs.
Basic playback Playing a Disc (continued) PLAY STOP PAUSE/STEP Basic playback (continued) To stop playback Press STOP. STOP The player memorizes the location where playback is stopped. To clear the memory, press the STOP button once again. 23 STOP To turn off the power Power switch Slide the power switch to “OFF”. PLAY OPEN button STOP Volume control To remove the disc Press the OPEN button on the main unit to open the disc cover.
Basic playback About the screen saver If you pause a picture of a DVD video disc and leave it still for approximately 20 minutes, the screen saver of the player automatically appears (when “Screen Saver” is set to “On” 51 ). To turn off the screen saver, press any button on the main unit or remote control. Automatic LCD Off function If the player is stopped or the screen saver is engaged for approximately 20 minutes, the LCD power automatically turned off.
Basic playback Variable Speed Playback FWD You can play discs at various speeds, and resume playback from the location where you stopped playback. REV PLAY SKIP ( / ) PAUSE/STEP PLAY PAUSE/STEP DVD-V VCD CD Playing in fast reverse or fast forward directions Press REV or FWD on the remote control during playback. SLOW To resume normal playback Press PLAY. PLAY REV: Fast reverse playback FWD: Fast forward playback REV SLOW Each time you press the REV or FWD button, the playback speed changes.
SLOW PLAY STOP PLAY SHIFT DVD-V VCD CD Basic playback STOP Playing in slow-motion Press SLOW while pressing SHIFT during playback. SHIFT SHIFT SLOW SLOW REV FWD Each time you press the SLOW button, the slow-motion speed changes. If you press the SLOW button during playback, you can view the picture in reverse slow-motion. (Only when using a DVD video disc.) To resume normal playback Press PLAY. PLAY Notes • The sound is muted during slow-motion playback.
Basic playback 1 2 Locating a Specific Title, Chapter, or Track 3 1 2 3 Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Contents of VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or track. DVD video disc Title 1 Chapter 1 Chapter 2 DVD-V VCD CD 1 Chapter 1 Title 2 Chapter 2 VIDEO CD/Audio CD Chapter 3 Press TOP MENU. TOP MENU Press want.
/ ENTER PLAY CLEAR 2 1 SHIFT 1 Locating a desired section by entering its corresponding number Press T several times. The display changes each time this button is pressed. If you want to locate a title, chapter or track, display “Title,” “Chapter,” or “Track” respectively. You can also enter the time counter of the desired location. 32 e.g. DVD-V T Title 01/03 Chapter -- /40 e.g. VCD Notes • Pressing the CLEAR button while pressing the SHIFT button resets the numbers.
Basic playback Locating a Specific Title, Chapter, or Track (continued) SKIP SKIP ( DVD-V VCD CD Locating a specific chapter or track Press SKIP ( / ) repeatedly to locate the chapter or track you want. Playback starts from the selected chapter or track. SKIP SKIP 26 To locate succeeding chapters or tracks. Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track.
Playing MP3/WMA Files SKIP / / / ENTER PLAY You can play MP3/WMA files on this player. 3 PAUSE/STEP Basic playback Playing MP3/WMA files Playable files MP3/WMA disc compatibility with this player is limited as follows: • Playable discs: • Sampling Frequency: • Bit rate: • CD physical format: • File system: • File name: • Total number of files: • WMA codec version: CD-ROM, CD-R, CD-RW 32 kHz, 44.
Basic playback SKIP ENTER / / / Viewing JPEG Files You can play JPEG files that have been recorded on a CD-R on this player. FWD PLAY STOP PAUSE/STEP ENTER / / / SKIP ( / PLAY STOP PAUSE/STEP ZOOM ) REV Viewing JPEG Files Preparation Prepare a disc that contains JPEG files you want to view 1 Set a disc contains JPEG files and close the disc cover. A menu appears. If you insert a KODAK Picture CD, automatically starts the slide show. With a KODAK Picture CD, the menu is not displayed.
Thumbnail mode Press e.g. / / / during playback. : : : : ENTER Basic playback To rotate a picture A picture is vertically reversed. A picture is horizontally reversed. Rotate counterclockwise (by 90°). Rotate clockwise (by 90°). To zoom in a picture 1 Press ZOOM during playback. You will enter the zoom mode. ZOOM Slide Show Menu 2 Press FWD or REV. SLOW FWD: Magnification REV: Image reduction Each time you press the FWD or REV button, the magnification level changes.
Basic playback Viewing JPEG Files (continued) JPEG files compatibility Discs and pixels whose compatibility with this player has been confirmed by TOSHIBA are as follows. Kodak Picture CD JPEG disc compatibility with this player is limited as follows: • Playable discs: • File system: • File name: • File size: • File format: • Resolution: 30 CD-ROM, CD-R, CD-RW ISO9660, UDF without interleave File names are limited to eight characters or less and must incorporate “JPG” extension. e.g.“********.
Advanced playback Customizing the performance of your player. Directly Accessing a Specific Location Repeat Play Playing in a Favorite Order Playing in Random Order Zooming a Picture Selecting the Sound Enhancement (E.A.M.
Advanced playback Directly Accessing a Specific Location You can access a specific location by entering its corresponding time (hours, minutes, seconds). ENTER PLAY CLEAR 2 1 SHIFT DVD-V VCD CD 1 Entering the time counter of the desired location Press T several times. The display changes each time this button is pressed. With DVD video disc, press this button until “Time” is displayed. With Video CD/audio CD, press this button until “Disc goto” or “Track goto” is displayed. e.g.
Repeat Play You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) STOP A-B RPT REPEAT DVD-V VCD CD Repeating a title, chapter, or track Each time you press the REPEAT button, the repeat mode changes as follows. RANDOM REPEAT Advanced playback To resume normal playback Press REPEAT. Press REPEAT repeatedly until the repeat icon disappear. RANDOM REPEAT Chapter You can also use STOP to exit repeat playback.
Advanced playback Playing in a Favorite Order You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 20 selections into the memory. (Memory playback) ENTER / / / STOP PLAY CLEAR Number buttons MEMORY SHIFT DVD-V VCD CD 1 Setting titles, chapters, or tracks in a favorite order Press MEMORY while pressing SHIFT during stop. The programming display appears.
Playing in Random Order You can play chapters or tracks in random order. (Random playback) STOP RANDOM SHIFT DVD-V VCD CD Playing chapters or tracks in random order SHIFT Each time you press the RANDOM button, the random mode changes as follows. To resume normal playback Press RANDOM while pressing SHIFT repeatedly until the random display disappear. RANDOM SHIFT RANDOM REPEAT Shuffle REPEAT You can also exit random playback by pressing STOP. Shuffle Plays chapters once on a disc in random order.
Advanced playback Zooming a Picture / You can magnify areas within a picture. / / ZOOM DVD-V VCD CD 1 Zooming a picture During normal, slow, still, fast reverse or fast forward playback, press ZOOM. The player enters the zoom playback mode, and the zoom icon appears. e.g. Select the zoom point and magnification level. You can select from the following. – Magnification – Image reduction – Normal playback ZOOM Press the ZOOM button repeatedly.
Selecting the Sound Enhancement (E.A.M.*) You can easily select a preferred audio enhancement. *E.A.M.: Enhanced Audio Mode 1, 2 DVD-V VCD CD Press E.A.M. PICTURE E.A.M. The sound enhancement menu appears. Notes • Actual effects to sounds may vary depending on the speaker system. Make the selection to your preference. • Actual effects to sounds may vary depending on the disc. • When the player is connected to an amplifier equipped with Dolby Surround Pro Logic, select “Normal”.
Advanced playback Selecting a Camera Angle 1, 2 If a scene was recorded with multiple angles, you can easily change the camera angle of the scene you are viewing. DVD-V VCD CD 1 Changing the camera angle Press ANGLE while playing a scene recorded with multiple angles. ANGLE While playing a scene recorded with multiple angles, the angle icon ( ) appears on the screen. Press the ANGLE button while the angle icon is displayed. e.g. 1/5 2 Selecting the camera angle by pressing ANGLE.
Selecting Subtitles You can display subtitles on the screen and select a subtitle language from those included on the DVD video disc. Good evening! DVD-V VCD CD ¡Buenas tardes! Selecting a subtitle language Press SUBTITLE during playback. SUBTITLE The current subtitle setting is displayed. To turn subtitles on or off Advanced playback 1 Bonsoir! SUBTITLE Press SUBTITLE several times during playback until “Turn off subtitles” is displayed. SUBTITLE e.g.
Advanced playback Selecting a Language You can select a preferred language and sound recording system from those included on the disc. Good morning! DVD-V VCD CD 1 Bonjour! AUDIO ¡Buenos días! Selecting a playback audio setting Press AUDIO during playback. AUDIO The current audio setting is displayed. Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. AUDIO e.g. Audio 1/3 : Dolby D 3/2.
Audio selection from the menu 46 49 and outputs Discs DVD video discs VIDEO CDs Audio CDs Sound recording system Dolby Digital 48 kHz/16 bit 48 kHz/20 bit Linear 48 kHz/24 bit PCM 96 kHz/16 bit 96 kHz/20 bit 96 kHz/24 bit DTS MPEG1, MPEG2 MPEG1 Linear PCM 44.
Advanced playback DISPLAY / / / Operating in the On-screen Display Mode CLEAR When you turn on the on-screen display, you can view information on operational status and access features and settings. DISPLAY / / / SHIFT DVD-V VCD CD On-Screen Display Operation When playing a DVD video disc 1 Press DISPLAY during playback. The following display appears. DISPLAY To select a title. To select a chapter. e.g. To select a playback audio setting. To select a subtitle language.
Advanced playback When playing a VIDEO CD or audio CD To select a track. To select the audio channel (Stereo, Mono L&R, Left, Right). To select a playback audio setting. To repeat a track or entire disc. e.g. Current track number Elapsed time of the current track Note Some discs may not be compatible with a set of these operations.
Advanced playback Adjusting the Picture You can easily select a preferred picture. 2 PICTURE PICTURE 2 SHIFT DVD-V VCD CD 1 Adjusting the picture Press PICTURE while pressing SHIFT. Alternatively press PICTURE on the main unit. The picture setting display appears. SHIFT Brightness ||||||||........ 08 PICTURE E.A.M. Each time you press the button, the setup items changes as follows. PICTURE Brightness Color Screen No display 2 Press / to adjust the value.
Function setup You can change the default settings to customize performance to your preference.
Function setup 1, 6 Customizing the Function Settings / / / ENTER You can change the default settings to customize performance to your preference. 1, 6 / / / ENTER DVD-V VCD CD 1 Setting procedure Press SETUP during stop. SETUP The following on-screen display appears. 4 Change the selection by / , by referring to the corresponding pages 47 , then press ENTER. e.g. SETUP MENU AUDIO MENU TV Shape Language Audio Operation Equalizer Mode ENTER ENTER E.A.M. D.R.C.
Setting TV Shape Language Audio TV Shape DVD-V On-screen Page 48 DVD-V VCD CD To select a preferred language for on-screen displays. 48 Audio DVD-V To select a preferred language for the sound track. 48 Subtitle DVD-V To select a preferred language for subtitles. 48 Disc Menu DVD-V To select a preferred language for disc menus. 48 You can easily switch to a preferred audio enhancement.
Function setup Customizing the Function Settings (continued) Setting details LANGUAGE MENU TV MENU TV Shape Setup Menu » 4:3 Normal 4:3 Letterbox 16:9 Widescreen On-screen Audio Subtitle Disc Menu » English French Spanish Setup Menu TV Shape 4:3 Normal: 4:3 Letterbox: DVD-V On-Screen DVD-V VCD CD Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Either or both sides of the picture are cut off. English: To view on-screen displays in English.
AUDIO MENU E.A.M. D.R.C. Audio Out Select » Normal 3D 3D (Headphone) Dialog Setup Menu Audio Out Select CD You can obtain expansive virtual surround sound effects from just two speakers. Normal: Normal sound. 3D: To obtain expansive virtual surround sound effects from just two speakers. 3D (Headphone): To obtain expansive virtual surround sound effects when using headphone.
Function setup Customizing the Function Settings (continued) Setting details OPERATION MENU Parental PBC Screen Saver Menu Style Default » ON OFF DVD-V DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental lock level and the way a DVD video disc can be controlled may vary from disc to disc.
EQUALIZER MENU PBC VCD EQ Mode ON : To use the menu when playing a PBC-featured VIDEO CD. OFF : When playing a VIDEO CD without using the menu. Screen Saver » Setup Menu None Rock Pop Live Dance Techno Classic Soft DVD-V EQ Mode DVD-V VCD CD Function setup ON : The screen saver operates. OFF : The screen saver is disengaged. You can select a preferred equalizer mode. Menu Style DVD-V VCD CD You can change setup menu configuration. Type1 : Setup menu is displayed in type1 configuration.
Connections You can connect the player to a TV or audio system. Also, you can connect a battery pack to power the player.
Connections Connecting to a TV or audio system Connect the player to your TV or audio system. For details of output sound, see 41 . Connecting to a TV Signal flow To AV OUT To S VIDEO OUT If the TV has an S video input, connect the player with an S video cable. When using an S video cable, do not connect the yellow video cable. S video cable (supplied) Audio/video cable (supplied) To S video input • Make the following setting.
Connecting to an audio system Signal flow To AV OUT Connections Audio/video cable (supplied) (red) To audio inputs of the amplifier Audio system (white) (yellow) When the AV OUT or BITSTREAM/PCM jacks are connected to the audio input terminals of an audio system, sounds of discs can be heard on the connected audio system. For instructions on connections to audio systems, see also page 57 . • Make the following setting.
Connections Connecting to Headphones You can listen to movies and music privately by connecting headphones. Headphones (not supplied) To 56 (headphone) jack Caution When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. Connecting headphones Connect headphones to the headphone jack using a stereo mini plug. Before connecting, temporarily turn down the volume with the headphone volume control.
Connecting to Audio Equipment You can enjoy high quality dynamic sounds by connecting the player to audio equipment. • For connection to your TV, see “Connecting to a TV” 54 . • For details of output sound, see 41 . • This section uses the following reference marks.
Connections Connecting to Audio Equipment (continued) Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Manufactured under license from Dolby Dolby Digital is the surround sound technology used in theaters showing the Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of latest movies, and is now available to reproduce this realistic effect in the home. Dolby Laboratories.
Connecting to an amplifier equipped with a DTS decoder Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.
Connections Connecting to Audio Equipment (continued) Connecting to an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).
Using the Battery Pack Warning • Do not use a battery pack other than one specified as it can result in a fire or damage to the unit. • Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an explosion or a fire. • Attach the battery pack properly following the explanation below. Make sure that the battery pack is attached firmly to the player when using it. Otherwise, the battery pack may become detached and cause personal injury.
Connections Using the Battery Pack (continued) Detaching the battery pack 1 Turn the player off. 2 Disconnect the AC adapter and the power cord from the player. 3 Turn the player upside down. 4 Slide the battery pack’s lock switch in the direction of the arrow 1 , then slide the battery pack in the direction of the arrow 2 to remove it. 2 1 Lock switch 5 Replace the connector cover on the bottom of the player.
Using the automobile/vehicle adapter or power port For use of the DVD player in a car, this adapter can power the DVD player from the cigarette lighter socket. Warning Notes • Never operate the player in a moving vehicle. Vibration may prevent proper playback of the player or cause damage to the disc. • Do not leave the adapter in an unoccupied vehicle to avoid exposing it to unusually high ambient temperatures.
Connections Instructions for Use 1 Turn off the DVD player. 2 Insert the pin plug of the adapter into the DC IN 12V jack of the DVD player. OFF 4 3 2 The LED illuminates when powered. 3 Insert the plug of the adapter into the cigarette lighter socket or power port fully. 4 Turn on the vehicle engine so that the cigarette lighter socket or power port is powered. In some vehicles the cigarette lighter socket or power port is powered even when the vehicle’s engine is not running.
Others Before Calling Service Personnel Specifications LIMITED WARRANTY PORTABLE DVD PLAYER
Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom Cause Correction No power. • The AC adapter or power plug is disconnected. • Connect the AC adapter or power plug securely. 16 • The battery pack has been removed. • Install the battery pack. 61 • Battery empty. • Re-charge the battery. 61 The LCD turned off by itself. • The automatic LCD off function turned the LCD off.
Symptom Cause Correction The remote control does not work properly. • The remote control is not pointed at the remote sensor of the player. • Point the remote control at the remote sensor of the player. 15 • The remote control is too far from the player. • Operate the remote control within about 3 m. 15 • The batteries in the remote control are exhausted. • Replace the batteries with new ones.
Others Specifications Player / Connectors / Liquid crystal display / Supplied accessories Player Power supply DC 12 V (Rated current : 3 A (Maximum: during battery pack charging)) 120 V AC, 60 Hz (with the supplied AC adapter) Mass 830 g External dimensions 200 × 33 × 160 mm (W/H/D) Signal system Standard NTSC Laser Semiconductor laser, wavelength 650 nm / 795 nm Frequency range DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz 96 kHz sampling 4 Hz to 44 kHz Operating conditions Temperature:
LIMITED WARRANTY PORTABLE DVD PLAYER Toshiba America Consumer Products, L.L.C. (“TACP”) and Toshiba Canada Limited (“TCL”) make the following limited warranties. These limited warranties extend to original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Others LIMITED WARRANTY PORTABLE DVD PLAYER (Continued) How to Obtain Service (1) Refer to the troubleshooting guide in your owner’s manual. This checklist may solve your problem or check our web site at WWW.TOSHIBA.COM/TACP. (2) Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be enclosed.
Memo Others 71
Printed in China
