Introduction TV Viewing 2 22 DIGITAL VIDEO Basic playback LCD TV/DVD COMBINATION SD-P5000 OWNER’S MANUAL Advanced playback Function setup Connections Others © 2004 TOSHIBA CORPORATION 33 47 61 69 79
Introduction SAFETY PRECAUTIONS CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location see service procedure. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
In the spaces provided below, record the Model and Serial No. located on the bottom of your unit. Model No. Serial No. Introduction Retain this information for future reference.
Introduction IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
21. When you use this product in an airplane, follow the instructions of the airline. Disregarding them may cause harmful interference to radio communication. 23. Do not use this product while walking or driving. Neglecting this may cause a traffic accident. 24. Should the LCD monitor be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your mouth, wash it out and consult your doctor.
Introduction IMPORTANT SAFETY INSTRUCTIONS j) Some cars may not have a compatible socket. NEVER modify this adapter to fit an incompatible cigarette lighter socket and/or power port. NEVER modify an incompatible cigarette lighter socket and/or power port to accept this adapter. Failure to observe the above warnings could cause smoke, fire, burns and/or electric shock. k) ALWAYS locate the apparatus on a level and secure surface.
Precautions Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use the unit in a place subject to vibration. Neglecting this may cause malfunction of the unit or damage to the disc. Do not leave the unit in a vehicle. Rise or drop in temperature may result in malfunction of the unit. When transporting the unit, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packaged at the factory.
Introduction Notes and Information Structure of disc contents On cleaning discs Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs/audio CDs are divided into tracks. Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.
This owner’s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the operation is not permitted by the unit or the disc. Playable discs This unit can play the following discs.
Introduction Notes and Information (continued) Exemptions Toshiba Corporation is not liable for any damage caused by fire, natural disaster (such as thunder, earthquake), acts by third parties, accidents, owner’s intentional or unintentional misuse, or uses in other improper conditions. Toshiba Corporation is not liable for incidental damages (such as profit loss or interruption in business, etc.) caused by use or inability to use of this unit.
Table of Contents SAFETY PRECAUTIONS .......................... 2 IMPORTANT SAFETY INSTRUCTIONS ... 4 Precautions ............................................... 7 Notes and Information ............................. 8 Playing MP3/WMA Files ......................... 43 Viewing JPEG Files ................................ 44 Advanced playback Notes on region numbers ................................. 9 Directly Accessing a Specific Location .. 48 Repeat Play .............................................
Introduction Identification of Controls See the page in for details.
Introduction Side view PICTURE Headphone jack 1 72 DC IN jack 17 Headphone jack 2 72 L AUDIO OUT R COMPONENT VIDEO IN PICTURE button 32 / 60 POWER AUDIO OUT (Left) 71 POWER button 22 AUDIO OUT (Right) 71 COMPONENT VIDEO IN 70 Rear view BITSTREAM/PCM OUT S-VIDEO IN VHF/UHF (75Ω) jack 16 BITSTREAM/PCM OUT jack 74 VIDEO IN L AUDIO IN R AUDIO IN jack (Right) 70 AUDIO IN jack (Left) 70 VIDEO IN jack 70 S-VIDEO jack 70 13
Introduction Identification of Controls (continued) The instructions in this manual describe the functions of the remote control. See the page in for details. Remote control RMT CODE button (See below) POWER button 22 SET UP button 23 / 42 POWER RMTCODE 12 INPUT SELECT SET UP SLEEP DIMMER E.A.M. INPUT SELECT button 23 E.A.M.
1 Open the cover. 2 Insert batteries (R03 size) Operating with the remote control Introduction Loading the remote control battery Point the remote control at the remote sensor on the unit and press the buttons. 30° 30° Within about 7 m (23 feet) Make sure to match the + and – on the batteries to the marks inside the battery compartment. 3 Close the cover. Notes on batteries Improper use of batteries may cause battery leakage and corrosion.
Introduction Antenna Connection Connecting an antenna to this unit Connect the antenna to this unit for viewing broadcast signals.
Power Connection Connect the supplied AC adapter to power the unit. Introduction Caution • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock. • Do not use an AC adapter other than one specified, as it can cause a fire or damage to the unit. • When the AC adapter is in use, its temperature may increase.
Introduction How to use the main unit You can use the main unit in three ways. Open the LCD monitor Adjusting the direction of the LCD monitor 1 Firmly press down on the main unit to setup the LCD monitor. 1 Raise the switch located on the back of the LCD monitor. 2 Open the LCD monitor. 2 Push the LCD monitor forward. If the LCD monitor is opened more than 90 degrees, the main unit may overturn, so be careful.
To remove a disc Move the LCD monitor to the upward direction as shown below. Introduction How to use when hanging it on a wall You can use the main unit with the LCD monitor bent back 180 degrees. Open the disc cover. OPEN Press OPEN on the main unit. The disc cover opens. • If the LCD monitor is not moved to the upward position and the disc cover is opened, the disc cover will hit against the LCD monitor and may break. A professional will perform the wall installation.
TV Viewing Settings for watching TV Channel Setting Selecting the Channel Settings the Sound Closed caption function/ V-CHIP function Adjusting the Picture
TV Viewing POWER Settings for watching TV Steps for watching TV Turning on the power Antenna Connection Turn on the power. 16 Press the POWER button on the main unit. POWER Power Connection 17 L AUDIO OUT R Selecting the TV mode 23 COMPONENT VIDEO IN POWER POWER button The unit turns on and the POWER indicator on the unit illuminates in green. Selecting the Display Language 23 Turning on the power during standby POWER Channel setting 24 Press the POWER button on the remote control.
Selecting the Display Language The unit can switch between TV mode and DVD mode etc. To watch TV, first switch to TV mode. INPUT SELECT TV DVD 1 S-VIDEO SET UP e.g. 2 CABLE 12 STEREO SAP To skip the external input mode The following on-screen display appears. LCD SETUP LANGUAGE : ENGLISH CC MODE SETUP V-CHIP SETUP TV SETUP TV/CABLE : TV CH PROGRAM ADD/ERASE : ADD VIDEO When switching to TV mode, a screen similar to the one below screen is displayed.
TV Viewing SET UP Channel Setting / ENTER Auto channel programming 1 2 4 Press SETUP. SET UP LCD SETUP LANGUAGE : ENGLISH CC MODE SETUP V-CHIP SETUP TV SETUP TV/CABLE : TV AUTO CH PROGRAM MANUAL CH PROGRAM / PROGRAM START RETURN STOP - - - - - - - - - - - - > - - - - - - - - - - - - CH06 • To return to the previous screen, select “RETURN” and press ENTER. • To cancel the channel setting, select “STOP” and press ENTER. to select TV/CABLE.
TV Viewing Manual channel programming 1 Dispay the “LCD SETUP” menu, and set “TV/CABLE” to “TV” or “CABLE”. 24 5 Press SETUP. The on-screen display disappears. SET UP 2 Press / to select “CH PROGRAM”, then press ENTER. ENTER The following on-screen display appears. To fine tune the channel Press / to select “ADJUST” then press change the frequency. / to MANUAL CH PROGRAM CH 4 ADJUST SKIP : RESET RETURN 3 To skip unnecessary channels 1 Press ENTER / to select “SKIP”.
TV Viewing SLEEP Selecting the Channel DISPLAY Number buttons CHANNEL Selecting the channel To select the channel To check the status of the screen being broadcasted Press the number buttons. e.g. Select 125 channel DISPLAY +10 100 2 5 Press DISPLAY. The status of the channel currently being broadcasted is displayed. e.g. To select to the next programmed channel Press the CHANNEL remote control.
Setting the Sound MONO/STEREO/SAP MUTE VOLUME TV Viewing Settings the sound To adjust the volume of the speakers or the connected headphones Turn volume control. VOLUME +: Increase volume. To select MONO/STEREO/SAP You can enjoy watching TV while you listen to highfidelity stereo sound with the Multi-channel TV Sound feature. Multi-channel TV Sound can also transmit a second audio program (SAP) containing a second language or other audio information. -: Decrease volume.
TV Viewing SET UP Closed caption function/V-CHIP function CAP/TEXT / ENTER Closed caption function You have two options with the closed caption feature (CC MODE): captions or text. A caption is a printed version of the dialogue, narration and/or sound effects of a TV program. Text is information not related to the program that appears on half of the TV screen when available. To set CC MODE BLACK: The following on-screen display appears.
SETUP Number buttons / ENTER The V-CHIP function is available only for the U.S. V-CHIP system. The Canadian V-CHIP system is not supported. You can prevent others from viewing certain programs or channels by blocking them using or channels by blocking them using the V-CHIP feature. PASSWORD SETUP 1 Press / to select PASSWORD SETUP, then press ENTER. The Motion Picture Association of America (MPAA) uses a rating system to quality motion picture containt.
TV Viewing Closed caption function/V-CHIP function (continued) / ENTER V-CHIP SETUP To set ENABLE BLOCKING To set TV RATING 1 Enter V-CHIP SETUP and enter a password. 1 Press / ENTER. 2 Press / to select the “TV RATING”, then press to select “ENABLE BLOCKING”. V-CHIP SETUP PASSWORD SETUP ENABLE BLOCKING : ON CHANGE PASSWORD : OK RETURN PASSWORD SETUP TV RATING MPAA RATING MPAA UNRATED : OFF TV NONE RATING : OFF RETURN 3 Press ENTER to select “ON” or “OFF”.
1 Press / ENTER. TV Viewing MPAA RATING MPAA UNRATED to select the “MPAA RATING”, then press Some movies are not rated. You can block these movies using the V-CHIP. 1 Press / to select the “MPAA UNRATED”. V-CHIP SETUP 2 Press ENTER repeatedly to select “ON” or “OFF”. PASSWORD SETUP TV RATING MPAA RATING MPAA UNRATED : OFF TV NONE RATING : OFF ON: To block unrated movies. OFF: To unblock unrated movies. RETURN TV NONE RATING 2 Press / to select the setting you want to change, then press ENTER.
TV Viewing DIMMER Adjusting the Picture PICTURE You can easily select a preferred picture. 2 DVD-V VCD CD 1 Adjusting the picture Press PICTURE. Alternatively press PICTURE on the main unit. The picture setting display appears. PICTURE PICTURE PICTURE BRIGHTNESS TINT COLOR CONTRAST SHARPNESS 15 15 15 15 OFF Adjust or 15 2 Press / +– or + / – to adjust the value.
Basic playback Begin your operation. Playing a Disc Variable Speed Playback Locating a Specific Title, Chapter, or Track Playing MP3/WMA Files Viewing JPEG Files About this manual • The numbers indicated by lines on the illustrations correspond to the associated steps of the operation. • Aside from the section “Playing a Disc”, explanations of operations only include illustrations of the corresponding buttons on the remote control.
Basic playback Playing a Disc This section shows you the basics on how to play a disc. indicates a reference page of this manual. See the page in for details. DVD-V VCD CD Basic playback Changing to the DVD mode The LCD TV/DVD combination can be switched to TV mode, DVD mode etc. and used. To play back a DVD video disc, VIDEO CD or AUDIO CD, switch to the DVD mode. INPUT SELECT TV CAUTION • Keep your fingers clear of the disc as it is spinning. Neglecting to may cause serious personal injury.
To obtain a higher quality picture (When connected to a TV) SET UP TOP MENU MENU / / ENTER PLAY STOP / Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on the connected TV when viewing DVD video discs.
Basic playback Playing a Disc (continued) PLAY PAUSE STOP Basic playback (continued) To stop playback Press STOP. STOP The unit memorizes the location where playback is stopped. To clear the memory, press the STOP button once again. 39 STOP To turn off the power Power button Slide the power switch to “OFF”. POWER PLAY STOP OPEN button Volume control To remove the disc Press the OPEN button on the main unit to open the disc cover.
Basic playback About the screen saver If you pause a picture of a DVD video disc and leave it still for approximately 20 minutes, the screen saver of the unit automatically appears (when “Screen Saver” is set to “On” 67 ). To turn off the screen saver, press any button on the main unit or remote control. Automatic LCD Off function If the unit is stopped or the screen saver is engaged for approximately 20 minutes, the LCD power automatically turned off.
Basic playback Variable Speed Playback You can play discs at various speeds, and resume playback from the location where you stopped playback. REV PLAY FWD PAUSE DVD-V VCD CD Playing in fast reverse or fast forward directions Press REV or FWD on the remote control during playback. REV To resume normal playback Press PLAY. PLAY REV: Fast reverse playback FWD: Fast forward playback FWD Each time you press the REV or FWD button, the playback speed changes. Press and hold SKIP ( unit during playback.
PLAY STOP SLOW REV/FWD DVD-V VCD CD Playing in slow-motion Basic playback To resume normal playback Press SLOW. Press PLAY. SLOW FWD Each time you press the SLOW FWD button, the slow-motion speed changes. SLOW REV If you press the SLOW REV button during playback, you can view the picture in reverse slowmotion. (Only when using a DVD video disc.) PLAY Notes • The sound is muted during slow-motion playback. • The playback speed may differ depending on the disc.
Basic playback Locating a Specific Title, Chapter, or Track 1 2 3 Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Contents of VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or track. DVD video disc Title 1 Chapter 1 Chapter 2 Chapter 1 Title 2 Chapter 2 VIDEO CD/Audio CD Chapter 3 Track 1 DVD-V VCD CD 1 Press TOP MENU. TOP MENU Press want.
CLEAR 2 1 / ENTER PLAY DVD-V VCD CD Press T several times. The display changes each time this button is pressed. If you want to locate a title, chapter or track, display “Title,” “Chapter,” or “Track” respectively. You can also enter the time counter of the desired location. 48 e.g. DVD-V T Notes • Pressing the CLEAR button resets the numbers. • This location display will disappear in a few seconds if no further operation is made.
Basic playback Locating a Specific Title, Chapter, or Track (continued) SKIP DVD-V VCD CD Locating a specific chapter or track Press SKIP ( / ) repeatedly to locate the chapter or track you want. Playback starts from the selected chapter or track. 42 SKIP To locate succeeding chapters or tracks. SKIP Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track.
Playing MP3/WMA Files You can play MP3/WMA files on this unit. ENTER / / / SKIP PLAY PAUSE STOP Playing MP3/WMA files Playable files Basic playback MP3/WMA disc compatibility with this unit is limited as follows: • Playable discs: • Sampling Frequency: • Bit rate: • CD physical format: • File system: • File name: • Total number of files: • WMA codec version: CD-ROM, CD-R, CD-RW 32 kHz, 44.
Basic playback Viewing JPEG Files REV PLAY You can play JPEG files that have been recorded on a CD-R on this unit. ENTER / / / SKIP PAUSE FWD STOP ZOOM Viewing JPEG Files Preparation Prepare a disc that contains JPEG files you want to view 1 Set a disc contains JPEG files and close the disc cover. A menu appears. If you insert a KODAK Picture CD, automatically starts the slide show. With a KODAK Picture CD, the menu is not displayed. (See the next page.) 46 . 4 Press PLAY or ENTER.
Thumbnail mode Press e.g. / / ENTER / during playback. : : : : Basic playback To rotate a picture A picture is vertically reversed. A picture is horizontally reversed. Rotate counterclockwise (by 90°). Rotate clockwise (by 90°). To zoom in a picture 1 Press ZOOM during playback. ZOOM You will enter the zoom mode. Slide Show Menu 2 Press FWD or REV. FWD REV FWD: Magnification REV: Image reduction Each time you press the FWD or REV button, the magnification level changes.
Basic playback Viewing JPEG Files (continued) JPEG files compatibility Discs and pixels whose compatibility with this unit has been confirmed by TOSHIBA are as follows. Kodak Picture CD JPEG disc compatibility with this unit is limited as follows: • Playable discs: • File system: • File name: • File size: • File format: • Resolution: 46 CD-ROM, CD-R, CD-RW ISO9660, UDF without interleave File names are limited to eight characters or less and must incorporate “JPG” extension. e.g.“********.
Advanced playback Customizing the performance of your unit. Directly Accessing a Specific Location Repeat Play Playing in a Favorite Order Playing in Random Order Zooming a Picture Selecting the Sound Enhancement (E.A.M.
Advanced playback Directly Accessing a Specific Location You can access a specific location by entering its corresponding time (hours, minutes, seconds). CLEAR 2 1 ENTER PLAY DVD-V VCD CD 1 Entering the time counter of the desired location Press T several times. The display changes each time this button is pressed. With DVD video disc, press this button until “Time” is displayed. With Video CD/audio CD, press this button until “Disc goto” or “Track goto” is displayed. e.g.
REPEAT Repeat Play REPEAT A-B You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) STOP DVD-V VCD CD Repeating a title, chapter, or track To resume normal playback Press REPEAT. Press REPEAT repeatedly until the repeat icon disappear. REPEAT Advanced playback Each time you press the REPEAT button, the repeat mode changes as follows. REPEAT Chapter You can also use STOP to exit repeat playback.
Advanced playback MEMORY CLEAR Playing in a Favorite Order You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 20 selections into the memory. (Memory playback) Number buttons ENTER / / / PLAY STOP DVD-V VCD CD 1 Setting titles, chapters, or tracks in a favorite order To change the programmed selections Press MEMORY during stop. MEMORY The programming display appears. e.g.
Playing in Random Order RANDOM You can play chapters or tracks in random order. (Random playback) STOP DVD-V VCD CD Playing chapters or tracks in random order To resume normal playback Press RANDOM. CAP/TEXT RANDOM Press RANDOM repeatedly until the random display disappear. CAP/TEXT Advanced playback Each time you press the RANDOM button, the random mode changes as follows. RANDOM Shuffle You can also exit random playback by pressing STOP. Shuffle Plays chapters once on a disc in random order.
Advanced playback Zooming a Picture You can magnify areas within a picture. / / / ZOOM DVD-V VCD CD 1 Zooming a picture During normal, slow, still, fast reverse or fast forward playback, press ZOOM. ZOOM The unit enters the zoom playback mode, and the zoom icon appears. To exit zoom playback Press ZOOM repeatedly until the zoom icon disappear. ZOOM You can also use STOP to exit zoom playback. e.g. Notes • Some discs may not respond to zoom feature.
Selecting the Sound Enhancement (E.A.M.*) 1, 2 You can easily select a preferred audio enhancement. *E.A.M.: Enhanced Audio Mode DVD-V VCD CD 1 Selecting the sound enhancement Press E.A.M. E.A.M. The sound enhancement menu appears. E.A.M. : Normal 2 Select the sound enhancement by pressing E.A.M. E.A.M. Each time you press the button, the sound enhancement changes. Normal: Normal sound. 3D: To obtain expansive virtual surround sound effects from just two speakers.
Advanced playback Selecting a Camera Angle If a scene was recorded with multiple angles, you can easily change the camera angle of the scene you are viewing. 1, 2 DVD-V VCD CD 1 Changing the camera angle Press ANGLE while playing a scene recorded with multiple angles. ANGLE While playing a scene recorded with multiple angles, the angle icon ( ) appears on the screen. Press the ANGLE button while the angle icon is displayed. e.g. 1/5 2 Selecting the camera angle by pressing ANGLE.
Selecting Subtitles You can display subtitles on the screen and select a subtitle language from those included on the DVD video disc. Good evening! Bonsoir! ¡Buenas tardes! SUB TITLE DVD-V VCD CD 1 Selecting a subtitle language Press SUBTITLE during playback. SUB TITLE The current subtitle setting is displayed. To turn subtitles on or off Press SUBTITLE several times during playback until “Turn off subtitles” is displayed.
Advanced playback Selecting a Language AUDIO You can select a preferred language and sound recording system from those included on the disc. Good morning! DVD-V VCD CD 1 Bonjour! ¡Buenos días! Selecting a playback audio setting Press AUDIO during playback. MONO/ STEREO/SAP AUDIO The current audio setting is displayed. Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. MONO/ STEREO/SAP e.g. AUDIO Audio 1/3 : Dolby D 3/2.
Output sound conversion table (sampling frequency/quantization bit) Audio selection from the menu 62 65 and outputs Discs VIDEO CDs Audio CDs Dolby Digital 48 kHz/16 bit 48 kHz/20 bit Linear 48 kHz/24 bit PCM 96 kHz/16 bit 96 kHz/20 bit 96 kHz/24 bit DTS MPEG1, MPEG2 MPEG1 Linear PCM 44.
Advanced playback Operating in the On-screen Display Mode CLEAR DISPLAY When you turn on the on-screen display, you can view information on operational status and access features and settings. DVD-V VCD CD / / / On-Screen Display Operation When playing a DVD video disc 1 Press DISPLAY during playback. The following display appears. DISPLAY To select a title. To select a chapter. e.g. To select a playback audio setting. To select a subtitle language. To change the camera angle.
When playing a VIDEO CD or audio CD To select a track. Advanced playback To select the audio channel (Stereo, Mono L&R, Left, Right). To select a playback audio setting. To repeat a track or entire disc. e.g. Current track number Elapsed time of the current track Note Some discs may not be compatible with a set of these operations.
Advanced playback DIMMER Adjusting the Picture PICTURE You can easily select a preferred picture. 2 DVD-V VCD CD 1 Adjusting the picture Press PICTURE. Alternatively press PICTURE on the main unit. The picture setting display appears. PICTURE PICTURE PICTURE BRIGHTNESS TINT COLOR CONTRAST SHARPNESS 15 15 15 15 OFF Adjust or 15 2 Press / +– or + / – to adjust the value.
Function setup You can change the default settings to customize performance to your preference.
Function setup 1, 6 Customizing the Function Settings You can change the default settings to customize performance to your preference. DVD-V VCD CD 1 ENTER / / / Setting procedure Press SETUP during stop. SET UP The following on-screen display appears. 4 Change the selection by / , by referring to the corresponding pages 63 , then press ENTER. e.g. DVD SETUP MENU TV Shape Language Audio Operation Equalizer Mode ENTER ENTER AUDIO MENU E.A.M. D.R.C.
Setting TV Shape Language Audio Page 64 DVD-V VCD CD To select a preferred language for on-screen displays. 64 Audio DVD-V To select a preferred language for the sound track. 64 Subtitle DVD-V To select a preferred language for subtitles. 64 Disc Menu DVD-V To select a preferred language for disc menus. 64 You can easily switch to a preferred audio enhancement. 65 To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late hours playback.
Function setup Customizing the Function Settings (continued) Setting details LANGUAGE MENU TV MENU TV Shape » 4:3 Normal 4:3 Letterbox On-screen Audio Subtitle Disc Menu Setup Menu » English French Spanish Setup Menu TV Shape 4:3 Normal: 4:3 Letterbox: DVD-V On-Screen DVD-V VCD CD Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Either or both sides of the picture are cut off. English: To view on-screen displays in English.
AUDIO MENU E.A.M. D.R.C. Audio Out Select » Normal 3D 3D (Headphone) Dialog Setup Menu Audio Out Select DVD-V VCD CD You can obtain expansive virtual surround sound effects from just two speakers. 3D: To obtain expansive virtual surround sound effects from just two speakers. 3D (Headphone): To obtain expansive virtual surround sound effects when using headphone.
Function setup Customizing the Function Settings (continued) Setting details OPERATION MENU Parental PBC Screen Saver Menu Style Default » ON OFF DVD-V DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental lock level and the way a DVD video disc can be controlled may vary from disc to disc.
EQUALIZER MENU PBC VCD EQ Mode ON : To use the menu when playing a PBC-featured VIDEO CD. OFF : When playing a VIDEO CD without using the menu. Screen Saver » Setup Menu None Rock Pop Live Dance Techno Classic Soft DVD-V ON : The screen saver operates. OFF : The screen saver is disengaged. EQ Mode DVD-V VCD CD You can select a preferred equalizer mode. Menu Style DVD-V VCD CD Type1 : Setup menu is displayed in type1 configuration. Type2 : Setup menu is displayed in type2 configuration.
Connections You can connect the unit to a TV or audio system. Also, you can connect a battery pack to power the unit.
Connections Connecting from other equipment By connecting the video output terminals of external equipment (such as a DVD player or a tuner) to the unit, video from external equipment can be viewed on the unit. Connecting to a S-VIDEO IN/VIDEO IN/COMPONENT VIDEO IN jack Connecting to a S-VIDEO IN jack INPUT SELECT Press the INPUT SELECT button repeatedly to select the S-VIDEO mode.
Connecting to an audio system Signal flow L AUDIO OUT R COMPONENT VIDEO IN POWER To AV OUT To audio inputs of the amplifier (red) Connections Audio/video cable (supplied) Audio system (white) (yellow) When the AV OUT or BITSTREAM/PCM jacks are connected to the audio input terminals of an audio system, sounds of discs can be heard on the connected audio system. For instructions on connections to audio systems, see also page 73 . • Make the following setting.
Connections Connecting to Headphones Caution When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. You can listen to movies and music privately by connecting headphones. Connecting headphones Connect headphones to the headphone jack using a stereo mini plug. Before connecting, temporarily turn down the volume with the headphone volume control. Readjust to your preference when playback starts.
Connecting to Audio Equipment You can enjoy high quality dynamic sounds by connecting the unit to audio equipment. • For details of output sound, see 57 . • This section uses the following reference marks. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Connections Notes • DO NOT connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver.
Connections Connecting to Audio Equipment (continued) Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Manufactured under license from Dolby Dolby Digital is the surround sound technology used in theaters showing the Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of latest movies, and is now available to reproduce this realistic effect in the home. Dolby Laboratories.
Connecting to an amplifier equipped with a DTS decoder Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.
Connections Connecting to Audio Equipment (continued) Connecting to an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).
Using the automobile/vehicle adapter or power port For use of the DVD player in a car, this adapter can power the DVD player from the cigarette lighter socket. Warning • NEVER operate the unit or view a DVD Video while operating an automobile or other vehicle. Note: doing so is illegal in many jurisdictions. NEVER place a unit within the eyesight of a driver while he/she is driving an automobile/vehicle. Note: A unit located in the front seating section of a vehicle is illegal in many jurisdictions.
Connections Instructions for Use 1 Turn off the unit. 2 Insert the pin plug of the adapter into the DC IN 15V jack of the unit. OFF 4 3 PICTURE 2 The LED illuminates when powered. 3 Insert the plug of the adapter into the cigarette lighter socket or power port fully. 4 Turn on the vehicle engine so that the cigarette lighter socket or power port is powered. In some vehicles the cigarette lighter socket or power port is powered even when the vehicle’s engine is not running.
Others Before Calling Service Personnel Specifications LIMITED WARRANTY PORTABLE DVD PLAYER
Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom Cause Correction No power. • The AC adapter or power plug is disconnected. • Connect the AC adapter or power plug securely. 16 The LCD turned off by itself. • The automatic LCD off function turned the LCD off. • Press any button. 21 No sound. • The equipment connected via the audio/ video cable is not set to receive DVD signal output.
Symptom Cause Correction The remote control does not work properly. • The remote control is not pointed at the remote sensor of the player. • Point the remote control at the remote sensor of the player. 15 • The remote control is too far from the player. • Operate the remote control within about 3 m. 15 • The batteries in the remote control are exhausted. • Replace the batteries with new ones.
Others Specifications Unit / Connectors / Liquid crystal display / Supplied accessories Unit Power supply DC 15 V (Rated current : 3 A (Maximum: during battery pack charging)) 120 V AC, 60 Hz (with the supplied AC adapter) Mass 830 g External dimensions 200 × 33 × 160 mm (W/H/D) Signal system Standard NTSC Laser Semiconductor laser, wavelength 650 nm / 795 nm Frequency range DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz 96 kHz sampling 4 Hz to 44 kHz Operating conditions Temperature: 5 °C
LIMITED WARRANTY LCD TV/DVD COMBINATION Toshiba America Consumer Products, L.L.C. (“TACP”) and Toshiba Canada Limited (“TCL”) make the following limited warranties. These limited warranties extend to original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Others LIMITED WARRANTY LCD TV/DVD COMBINATION (Continued) How to Obtain Service (1) Refer to the troubleshooting guide in your owner’s manual. This checklist may solve your problem or check our web site at WWW.TOSHIBA.COM/TACP. (2) Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be enclosed.
