Introduction Basic playback 2 17 DIGITAL VIDEO Advanced playback PORTABLE DVD PLAYER SD-P90DTSE Function setup Connections OWNER’S MANUAL TV Viewing Others © 2007 TOSHIBA CORPORATION E PX1D00001230 01SD-P90DTSE_E_EU_P01 1 07/3/23, 12:43 31 45 53 65 73
Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Location of the required label Introduction Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Introduction IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 9. Only use attachments/accessories specified by the manufacturer. 1.
21. When you use this product in an airplane, follow the instructions of the airline. Disregarding them may cause harmful interference to radio communication. 23. Do not use this product while walking or driving. Neglecting this may cause a traffic accident. 24.
Introduction IMPORTANT SAFETY INSTRUCTIONS 27. Coin-shaped Battery a) Keep coin-shaped batteries out of children’s reach. Be careful not to ingest internally, especially by children, as doing so may cause poisoning. b) Do not load a battery into the remote control with the wrong side out. c) Do not charge, heat, open, or short-circuit the batteries. Do not throw the batteries into a fire. d) Do not leave a dead or exhausted battery in the remote control.
Introduction m) When using the adapter, insert the plug of the adapter into the cigarette lighter socket or power port fully. The incomplete insertion will cause smoke or fire. n) Do not touch the adapter with wet hands. Do Not expose the adapter to water of liquid. 32. Carrying case a) Do not drive a car with the carrying case attached. Neglecting this may cause personal injury by bumps at sudden stops. b) Do not place the carrying case within range of an airbag, as it may obstruct the deployment.
Introduction Precautions Notes on handling Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use the player in a place subject to vibration. Neglecting this may cause malfunction of the player or damage to the disc. Do not leave the player in a vehicle. Rise or drop in temperature may result in malfunction of the player. When transporting the player, the original shipping carton and packing materials come in handy.
Notes and Information Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs/ audio CDs are divided into tracks. Introduction On cleaning discs Structure of disc contents Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.
Introduction Notes and Information (continued) About this owner’s manual This owner’s manual explains the basic instructions of this player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the player may not respond to all operating commands. This is not a defect in the player. Refer to instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the operation is not permitted by the player or the disc.
Table of Contents SAFETY PRECAUTIONS .......................... 2 IMPORTANT SAFETY INSTRUCTIONS ... 4 Precautions ............................................... 8 Notes and Information ............................. 9 Selecting a Camera Angle ..................... 38 Selecting Subtitles ................................. 39 Selecting a Language ............................. 40 Operating in the On-screen Display Mode .. 42 Adjusting the Picture .............................
Introduction Identification of Controls See the page in for details.
Introduction Side view ANT IN ANT IN input soket 66 Power switch 18 19 DC IN jack 16 Volume control 19 Headphone jack 1 56 Headphone jack 2 56 AV IN jack 56 AV OUT jack 54 BITSTREAM/PCM jack 58 59 13 02SD-P90DTSE_E_EU_P02-16 13 07/3/23, 11:08
Introduction Identification of Controls (continued) The instructions in this manual describe the functions of the remote control. See the page in for details. Remote control MENU button (see below) E.A.M.
1 Gently insert a fingernail in groove 1 and pull out the holder in direction 2 . Operating with the remote control Introduction Loading the remote control battery Point the remote control at the remote sensor on the player and press the buttons. Backside 1 2 Take care not to break your fingernail. Within about 3 m (9.9 feet) C R 2 3V 02 5 2 Place a coin-shaped battery (CR2025) side up on the holder. with the Keep the holder horizontal so that the battery does not fall through.
Introduction Power Connection Connect the supplied AC adapter to power the player. For mobile use, the battery pack (supplied) is also available. When using the battery pack, follow the instructions on page 60 . CAUTION • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
Basic playback Begin your operation. Playing a Disc Variable Speed Playback Locating a Specific Title, Chapter, or Track Playing MP3/WMA Audio or DivX® Video Files Viewing JPEG Files About this manual • The numbers indicated by lines on the illustrations correspond to the associated steps of the operation. • Explanations of operations may only include illustrations of the corresponding buttons on the remote control.
Basic playback Playing a Disc This section shows you the basics on how to play a disc. indicates a reference page of this manual. See the page in for details. DVD-V VCD CD CAUTION • Keep your fingers clear of the disc as it is spinning. Neglecting to may cause serious personal injury. • Be careful not to catch your fingers in the disc holder. • Do not use a cracked, deformed, or repaired disc. • Do not tilt, shake or move the main unit while playing. It may damage the disc.
TOP MENU MENU SETUP PAUSE/STEP STOP PLAY ENTER / / / To obtain a higher quality picture (When connected to a TV) Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this player, you should generally reduce the sharpness adjustment on the connected TV when viewing DVD video discs.
Basic playback Playing a Disc (continued) Basic playback (continued) To change an on-screen language 5 Press SETUP. 1 Press SETUP. The following on-screen display appears. The on-screen display disappears. TV MENU TV Shape / to select “LANGUAGE MENU”, then 2 Press press ENTER. 3 Press / ENTER. to select “On-screen”, then press 4 Select a language using / , then press ENTER.
Basic playback About the screen saver If 20 minutes elapse while the power is on and there is no disc in the player or while the disc is stopped, the screen saver is automatically displayed (when “Screen Saver” is set to “On” 51 ). To turn off the screen saver, press any button on the main unit or remote control. Automatic LCD Off function If the player is stopped or the screen saver is engaged for approximately 20 minutes, the LCD power automatically turned off.
Basic playback Variable Speed Playback PAUSE/STEP PLAY FWD REV You can play discs at various speeds, and resume playback from the location where you stopped playback. STOP PLAY DVD-V VCD CD Playing in fast reverse or fast forward directions Press REV or FWD on the remote control during playback. To resume normal playback Press PLAY. REV: Fast reverse playback FWD: Fast forward playback Each time you press the REV or FWD button, the playback speed changes.
STOP PLAY SLOW STOP PLAY Basic playback DVD-V VCD CD SHIFT Playing in slow-motion Press SLOW while pressing SHIFT during playback. To resume normal playback Press PLAY. Each time you press the SLOW button, the slow-motion speed changes. If you press the SLOW button during playback, you can view the picture in reverse slow-motion. (Only when using a DVD video disc.) Notes • The sound is muted during slow-motion playback. • The playback speed may differ depending on the disc.
Basic playback 1 Locating a Specific Title, Chapter, or Track 2 3 1 SKIP ( SKIP ( / / ) ) 2 3 Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Contents of VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or track. DVD video disc Title 1 Chapter 1 Chapter 2 DVD-V VCD CD 1 Chapter 1 Title 2 Chapter 2 VIDEO CD/Audio CD Chapter 3 Track 1 Track 2 Press TOP MENU. The top menu appears. Press want.
PLAY CLEAR / ENTER 1 2 SHIFT 1 Locating a desired section by entering its corresponding number Press T several times. The display changes each time this button is pressed. If you want to locate a title, chapter or track, display “Title,” “Chapter,” or “Track” respectively. You can also enter the time counter of the desired location. 32 e.g. DVD-V Notes • Pressing the CLEAR button while pressing the SHIFT button resets the numbers.
Basic playback Playing MP3/WMA Audio or DivX® Video Files You can play MP3/WMA or DivX® files on this player.
Viewing JPEG Files You can play JPEG files that have been recorded on a CD-R on this player. STOP PLAY SKIP ( PAUSE / / / ENTER / ) PAUSE/STEP STOP ZOOM PLAY FWD / / / ENTER SKIP REV Basic playback Viewing JPEG Files Preparation Prepare a disc that contains JPEG files you want to view 29 . 1 Set a disc contains JPEG files and close the disc cover. 2 Press / ENTER. A menu appears. 4 Press PLAY or ENTER. A slide show begins from the selected picture.
Basic playback Viewing JPEG Files (continued) Viewing JPEG Files (continued) To rotate a picture Thumbnail mode Press e.g. / / / during playback. : : : : A picture is vertically reversed. A picture is horizontally reversed. Rotate counterclockwise (by 90°). Rotate clockwise (by 90°). To zoom in a picture 1 Press ZOOM during playback. You will enter the zoom mode. Slide Show Menu 2 Press FWD. FWD: Magnification Each time you press the FWD button, the magnification level changes.
Basic playback JPEG files compatibility Discs and pixels whose compatibility with this player has been confirmed by TOSHIBA are as follows. JPEG disc compatibility with this player is limited as follows: • Playable discs: • File system: • File name: • File size: • File format: • Resolution: CD-ROM, CD-R, CD-RW ISO9660, UDF without interleave File names are limited to eight characters or less and must incorporate “JPG” extension. e.g.“********.
04SD-P90DTSE_E_EU_P28-30 30 07/3/23, 11:11
Advanced playback Customizing the performance of your player. Directly Accessing a Specific Location Repeat Play Playing in a Favorite Order Playing in Random Order Zooming a Picture Selecting the Sound Enhancement (E.A.M.
Advanced playback Directly Accessing a Specific Location PLAY CLEAR You can access a specific location by entering its corresponding time (hours, minutes, seconds). ENTER 1 2 SHIFT DVD-V VCD CD 1 Entering the time counter of the desired location Press T several times. The display changes each time this button is pressed. With DVD video disc, press this button until “Time” is displayed. With Video CD/audio CD, press this button until “Disc goto” or “Track goto” is displayed.
Repeat Play STOP You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) REPEAT A-B REPEAT DVD-V VCD CD Repeating a title, chapter, or track Each time you press the REPEAT button, the repeat mode changes as follows. DVD-V VCD CD 1 Press REPEAT repeatedly until the repeat icon disappears. You can also use STOP to exit repeat playback. Chapter DVD-V Chapter Repeats the same chapter. DVD-V Title Repeats the same title.
Advanced playback Playing in a Favorite Order STOP PLAY CLEAR / / / ENTER You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 20 selections into the memory. (Memory playback) MEMORY Number buttons SHIFT DVD-V VCD CD 1 Setting titles, chapters, or tracks in a favorite order To change the programmed selections Press MEMORY. The programming display appears. e.g.
Playing in Random Order STOP You can play chapters or tracks in random order. (Random playback) RANDOM DVD-V VCD CD Playing chapters or tracks in random order Each time you press the RANDOM button, the random mode changes as follows. Advanced playback To resume normal playback Press RANDOM. Press RANDOM repeatedly until the random display disappears. You can also exit random playback by pressing STOP. Shuffle Shuffle Plays chapters once on a disc in random order.
Advanced playback Zooming a Picture ZOOM You can magnify areas within a picture. / DVD-V VCD CD 1 / Zooming a picture During normal, slow, still, fast reverse or fast forward playback, press ZOOM. The player enters the zoom playback mode, and the zoom icon appears. e.g. 2 / To exit zoom playback Press ZOOM repeatedly until the zoom icon disappears. You can also use STOP to exit zoom playback. Notes • Some discs may not respond to zoom feature.
Selecting the Sound Enhancement (E.A.M.*) 1, 2 You can easily select a preferred audio enhancement. *E.A.M.: Enhanced Audio Mode DVD-V VCD CD Press E.A.M. The sound enhancement menu appears. Notes • Actual effects to sounds may vary depending on the speaker system. Make the selection to your preference. • Actual effects to sounds may vary depending on the disc. E. A. M. : Normal 2 Select the sound enhancement by pressing E.A.M. Each time you press the button, the sound enhancement changes.
Advanced playback Selecting a Camera Angle 1, 2 If a scene was recorded with multiple angles, you can easily change the camera angle of the scene you are viewing. DVD-V VCD CD 1 Changing the camera angle Press ANGLE while playing a scene recorded with multiple angles. While playing a scene recorded with multiple angles, the angle icon ( ) appears on the screen. Press the ANGLE button while the angle icon is displayed.
Selecting Subtitles SUBTITLE You can display subtitles on the screen and select a subtitle language from those included on the DVD video disc. Good evening! DVD-V VCD CD ¡Buenas tardes! Selecting a subtitle language Press SUBTITLE during playback. The current subtitle setting is displayed. To turn subtitles on or off Press SUBTITLE several times during playback until “Turn off subtitles” is displayed. e.g.
Advanced playback Selecting a Language AUDIO You can select a preferred language and sound recording system from those included on the disc. Good morning! DVD-V VCD CD 1 Bonjour! ¡Buenos días! Selecting a playback audio setting Press AUDIO during playback. The current audio setting is displayed. Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. e.g. Audio 1 /3 : Dolby D 3/2.
Audio selection from the menu 46 49 and outputs Discs DVD video discs VIDEO CDs Audio CDs “Bitstream” “Analog 2ch” “PCM” BITSTREAM/PCM Speakers/AV OUT jack/ BITSTREAM/PCM Speakers/AV OUT jack/ BITSTREAM/PCM Speakers/AV OUT jack/ jack Headphone jacks jack Headphone jacks jack Headphone jacks Sound recording system Dolby Digital 48 kHz/16 bit 48 kHz/20 bit Linear 48 kHz/24 bit PCM 96 kHz/16 bit 96 kHz/20 bit 96 kHz/24 bit DTS MPEG1, MPEG2 MPEG1 Linear PCM 44.
Advanced playback MODE/ DISPLAY Operating in the On-screen Display Mode CLEAR / / When you turn on the on-screen display, you can view information on operational status and access features and settings. SHIFT DVD-V VCD CD On-Screen Display Operation When playing a DVD video disc 1 Press DISPLAY while pressing SHIFT during playback. The following display appears. e.g. DVD-Video Title 2 Press / Chapter to select item. DVD-Video Title 3 Change the selection by Chapter / .
Advanced playback When playing a VIDEO CD or audio CD To select a track. To select the audio channel (Stereo, Mono L&R, Left, Right). To select a playback audio setting. To repeat a track or entire disc. e.g. Track Current track number Elapsed time of the current track Note Some discs may not be compatible with a set of these operations.
Advanced playback Adjusting the Picture PICTURE You can easily select a preferred picture. / 2 DVD-V VCD CD 1 Adjusting the picture Press PICTURE. Alternatively press PICTURE on the main unit. (This function can only be set when you view pictures on the LCD of the player.) The picture setting display appears. Each time you press the button, the setup items changes as follows.
Function setup You can change the default settings to customize performance to your preference.
Function setup 1, 6 Customizing the Function Settings / / / ENTER You can change the default settings to customize performance to your preference. / / / ENTER DVD-V VCD CD 1 Setting procedure Press SETUP during stop. The following on-screen display appears. 4 Change the selection by / , by referring to the corresponding pages 47 , then press ENTER. e.g. TV MENU AUDIO MENU TV Shape E.A.M. D.R.C.
Setting TV MENU LANGUAGE MENU AUDIO MENU Details 48 DVD-V VCD CD To select a preferred language for on-screen displays. 48 Audio DVD-V To select a preferred language for the sound track. 48 Subtitle DVD-V To select a preferred language for subtitles. 48 Disc Menu DVD-V To select a preferred language for disc menus. 48 You can easily switch to a preferred audio enhancement.
Function setup Customizing the Function Settings (continued) Setting details LANGUAGE MENU TV MENU TV Shape TV Shape 4:3 Normal: 4:3 Normal 4:3 Letterbox 16:9 Widescreen On-screen Audio Subtitle Disc Menu On-screen DVD-V Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Either or both sides of the picture are cut off when playing a source of 16:9 picture size.
Audio Out Select AUDIO MENU E.A.M D.R.C. Audio Out Select Normal 3D 3D (Headphone) Dialog DVD-V VCD CD Select the output sound format corresponding to your system connection. For details of sound recording systems, see 41 . Analog 2ch: Select when connected to a TV, or Dolby Pro Logic or stereo system via the analog audio jacks. 54 DVD-V VCD CD Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder.
Function setup Customizing the Function Settings (continued) Setting details (continued) 2) Press / to select the parental lock level, then press the ENTER button. OPERATION MENU Parental PBC Ssreen Saver DivX Registration Default On Off --PASSWORD VERIFY PAGE-Security Code Parental Level 1 2 3 4 5 6 7 8 Operation Parental G PG PG 13 PGR R NC-17 Adult DVD-V DVD video discs equipped with the parental lock function are rated according to their content.
PBC VCD On : To use the menu when playing a PBC-featured VIDEO CD. Off : When playing a VIDEO CD without using the menu. Screen Saver CHANNEL EQUALIZER EQ Type DVD-V None Rock Pop Live Dance Techno Classic Soft EQ Type DivX Registration DVD-V VCD CD You can select a preferred equalizer mode. If you select “Drm Code” and press ENTER, the Divx information appears. While it is displayed, press ENTER to return to “LANGUAGE MENU” Default DVD-V VCD Function setup On : The screen saver operates.
06SD-P90DTSE_E_EU_P45-52 52 07/3/23, 11:13
Connections You can connect the player to a TV or audio system. Also, you can connect a battery pack to power the player.
Connections Connecting to a TV or audio system You can enjoy various disks by connecting the player to your TV or an audio system. For details of output sound, see 41 . Connecting to a TV Signal flow To AV OUT (red) Audio/video cable (supplied) To video input • Make the following setting. On-screen display Select: “Audio Out Select” “Analog 2ch” To audio inputs TV or monitor with (white) audio/video inputs (yellow) Page 46 49 Notes • Refer to the owner’s manual of the connected TV as well.
Connecting to an audio system Signal flow To AV OUT Connections Audio/video cable (supplied) (red) To audio inputs of the amplifier Audio system (white) (yellow) When the AV OUT or BITSTREAM/PCM jacks are connected to the audio input terminals of an audio system, sounds of discs can be heard on the connected audio system. For instructions on connections to audio systems, see also page 57 . • Make the following setting.
Connections Connecting to Headphones Caution When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. You can listen to movies and music privately by connecting headphones. Connecting headphones Connect headphones to the headphone jack using a stereo mini plug. Before connecting, temporarily turn down the volume with the headphone volume control. Readjust to your preference when playback starts.
Connecting to Audio Equipment You can enjoy high quality dynamic sounds by connecting the player to audio equipment. • For connection to your TV, see “Connecting to a TV” 54 . • For details of output sound, see 41 . • This section uses the following reference marks.
Connections Connecting to Audio Equipment (continued) Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor.
Connecting to an amplifier equipped with an MPEG2 audio decoder MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. • Use DVD video discs encoded via the MPEG2 recording system. • Make the following setting. On-screen display Select: “Audio Out Select” “Bitstream” Amplifier equipped with an MPEG2 audio decoder 46 49 Recording system (Press AUDIO.
Connections Using the Battery Pack The supplied battery pack can power the player for operation outdoors or in a place with no outlets. WARNING • Do not use a battery pack other than one specified as it can result in a fire or damage to the unit. • Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an explosion or a fire. • Attach the battery pack properly following the explanation below.
Detaching the battery pack 1 Turn the player off. 2 Disconnect the AC adapter and the power cord from the player. 3 Turn the player upside down. 4 Slide the battery pack’s lock switch in the direction of the arrow 1 , then slide the battery pack in the direction of the arrow 2 to remove it. Connections Lock switch 5 Attach the connector cover on the bottom of the player.
Connections Using the automobile/vehicle Adapter or Power Port For use of the DVD player in a car, this adapter can power the DVD player from the cigarette lighter socket. WARNING • NEVER operate the player or view a DVD Video while operating an automobile or other vehicle. Note: doing so is illegal in many jurisdictions. NEVER place a player within the eyesight of a driver while he/she is driving an automobile/vehicle.
Instructions for Use 1 Turn off the player. 2 Insert the pin plug of the adapter into the DC IN 12V jack of the player. 1 2 Connections OFF The LED illuminates when powered. 3 4 3 Insert the plug of the adapter into the cigarette lighter socket or power port fully. 4 Turn on the vehicle engine so that the cigarette lighter socket or power port is powered. In some vehicles the cigarette lighter socket or power port is powered even when the vehicle’s engine is not running.
Connections Using the carrying case Using for carrying When using the case for carrying, put the player or its accessories in the carrying case, then zip it to close firmly. Attaching to a car seat You can use the player in the backseat by attaching the carrying case to the back of the front seat. 1 String belts 1, 2 into their holders around the carrying case, then hook the belt3. 3 Put the player in the attached carrying case, then make sure it is fixed properly.
TV Viewing Preparation for TV viewing TV view operations 09SD-P90DTSE_E_EU_P65-72 65 07/3/23, 11:18
TV Viewing Preparation for TV viewing When poor broadcast reception due to inclement weather or other reasons, the picture or sound may be affected and video noise or audio noise may occur. Also depending on your location, the broadcast reception signal may fail. Connection Using an aerial Using the supplied outcloors aerial Before you use the portable DVD player outdoors, attach the battery pack supplied with the player and sufficiently charge the battery.
Initial setup - Scanning channels available in your area 1 In DTV mode (page 66 ), press SETUP. 7 Press / to select “Channel Setup”, then press ENTER. The following menu appears. 2 Press repeatedly to select “DVB-T MENU”, then press ENTER. CHANNEL MENU Auto Scan Manual Scan Adjust Channel Channel Remap Reserve Channel Start The following menu appears. DVB-T MENU Area Time Zone Parental Age Channel Setup / to select “Area”, then press A cursor appears in the sub menu.
TV Viewing TV view operations Operations while viewing In DTV mode (page 66 ), the following buttons can funciton. To display information about the current channel If you do this operation again while channel information is displayed, signal status information is added. Further doing the same operation turns off the display. e.g.
To display teletext (if the service available) To display EPG EPG is a program list of the day per channel. On teletext display, the following operations are available. To change pages. To select gray command. To select yellow command To select cyan command. To close, press TELETEXT while pressing SHIFT. “Channel” (on-screen) To change to another channel. Select this using / , then press ENTER. Channels are listed. Press / to select a channel then press ENTER.
TV Viewing TV view operations (continued) Customizing channel lineup 4 Press To customize the channel order You can swap the positions of 2 channels. 1 In DTV mode (page 66 ), press SETUP. / to select the age, then press ENTER. 5 Press SETUP to exit. 2 Press repeatedly to select “DVB-T MENU”, then press ENTER. The following features are not available while you are viewing “Favorite” channel selections. Select “TV” or “Radio” beforehand. 3 Press / ENTER.
To set a parental protect to a channel To view the list of channels reserved on EPG 1 In DTV mode (page 1 In DTV mode (page 66 ), press SETUP. 66 ), press SETUP. 2 Press repeatedly to select “DVB-T MENU”, then press ENTER. 2 Press repeatedly to select “DVB-T MENU”, then press ENTER. 3 Press / ENTER. 3 Press / ENTER. to select “Channel Setup”, then press to select “Channel Setup”, then press 4 Press / to select “Reserve Channel”, then press ENTER.
09SD-P90DTSE_E_EU_P65-72 72 07/3/23, 11:18
Others Before Calling Service Personnel Specifications 10SD-P90DTSE_E_EU_P73-80 73 07/3/23, 11:19
Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Page Symptom Cause Correction No power. • The AC adapter or power plug is disconnected. • Connect the AC adapter or power plug securely. 16 • The battery pack has been removed. • Install the battery pack. 60 • Battery empty. • Re-charge the battery. 60 The LCD turned off by itself. • The automatic LCD off function turned the LCD off.
Symptom Cause Correction The remote control does not work properly. • The remote control is not pointed at the remote sensor of the player. • Point the remote control at the remote sensor of the player. Page 15 • The remote control is too far from the player. • Operate the remote control within about 3 m. 15 • The batteries in the remote control are exhausted. • Replace the batteries with new ones.
Others Specifications Player / Connectors / Liquid crystal display / Supplied accessories Player Power supply DC 12 V (Rated current : 2A (Maximum: during battery pack charging)) 100 – 240 V AC, 50/60 Hz (with the supplied AC adapter) Mass 1.2 kg External dimensions 240 × 32 × 170 mm (W/H/D) Signal system PAL/3.
Memo Others 77 10SD-P90DTSE_E_EU_P73-80 77 07/3/23, 11:19
Others Memo 78 10SD-P90DTSE_E_EU_P73-80 78 07/3/23, 11:19
Memo Others 79 10SD-P90DTSE_E_EU_P73-80 79 07/3/23, 11:19
N 10SD-P90DTSE_E_EU_P73-80 Printed in China 80 07/3/23, 11:19