SD3005KB
Introduction SAFETY PRECAUTIONS English This symbol is intended to alert the user of the presence of uninsulated 'dangerous voltage' within the product' s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people. CAUTION: VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
Introduction English 18. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction. 19. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire. 20. While it is thundering, do not touch the connecting cables or the apparatus.
Introduction English CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service this product yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center. CAUTION! Do not use solvents such as benzene, thinner, commercially available cleaners, or anti-static sprays intended for analog discs.
Introduction Region English U.S.A. and Canada regions Discs that can be played ALL 1 ALL 2 ALL 3 Australia, New Zealand, Latin America ALL 4 Russia and India regions ALL 5 China, Calcos Islands, Walls and Futuna Islands ALL 6 U.K., Europe regions and Japan Asia Pacific, Taiwan, Korea This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Introduction Introduction SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS Setup Cleaning discs Moisture Condensation Region Codes Table of Contents Connections Connecting to television Connecting to a Stereo System Connecting to a Digital AV Receiver Connecting the power cord Product Overview Front and Rear panels Remote Control Getting Started 1 1-3 4 4 4 4-5 6 7 8 8 9 10 11 Inserting Batteries Finding you
Connections Connecting to television English IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your television. – Connect the DVD player directly to the television. Using HDMI® cable HDTV / DVI TV HDMI IN HDMI IN Using SCART socket A Use the scart cable to connect the DVD SCART OUT to the corresponding scart input socket on the TV (cable not supplied).
Connections Connecting to a Digital AV Receiver Stereo System with Left/Right Audio In Jacks Receiver has a PCM, Dolby Digital or MPEG decoder English Connecting to a Stereo System A Select one of the video connections (CVBS VIDEO IN, SCART IN or HDMI IN) depending on the options available on your TV. B Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).
Connections English Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
Product Overview English Front and Rear panels Disc tray - Place a disc here I/2 ON/STANDBY - Turns the player on or switches it to standby mode çOPEN/CLOSE - Opens or closes the disc tray IR Sensor B/X PLAY/ PAUSE - Points the remote control towards this sensor - Starts or pauses playback Display - Shows information about the current status of the DVD Player STOP - Stops playback MAINS ~ - Connects to a standard AC outlet SCART OUT - Connects to SCART input of a TV COAXIAL(Digital audio out)
Product Overview Remote Control English See the page in [ ] for details. [ 15 ]DISPLAY -Displays information on TV screen during playback [ 13 ]OPEN/CLOSE -Open/close the disc tray [ 14, 15, 20 ]Number Buttons -Selects numbered items in a menu -Press to enter track/chapter/title numbers or password directly [ 14 ]+10 button -Press to enter number greater than 9 -Press +10 button repeatedly to select 10,20,30...
Inserting Batteries A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+ / - ) inside the compartment. C Close the cover. CAUTION: - Never throw batteries into a fire. - The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Note: - Be sure to use AAA size batteries. - Dispose of batteries in a designated disposal area. - Batteries should always be disposed of with the environment in mind.
Getting Started/Playback from Disc/Playback Feature English Select this to change the language of the disc menu. D Use / to select a language and press OK to confirm. E Repeat steps C - D for other language settings. IMPORTANT! - DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player.
Playback Feature Basic playback control For VCD: Program 1 2 3 4 5 6 Track 3 7 8 Track 4 9 10 11 12 13 14 15 16 Track 1 Track 2 Track 5 Track 6 Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback A During playback, press PLAY/PAUSE to pause playback and display a still picture. Sound will be muted. B To resume normal playback, press PLAY/PAUSE again. Play Clear Stopping playback A During playback, press STOP .
Playback Feature Forward/ Reverse Searching English You can fast forward or fast reverse a disc during playback and select a desired search speed. For DVD,VCD, SVCD,CD, MP3 A During playback, press F.R/ F.F to select the required speed: X2, X8, X30, X100(backward or forward). Sound will be muted (DVD/VCD/SVCD/MP3) or intermittent (CD). . B To return to normal speed, press PLAY / PAUSE Selecting various repeat functions Repeat play mode The repeat play options vary depending on the disc type.
Playback Feature Playback Selection Subtitles Press PREV / NEXT to select the previous/next track/file in the current folder. repeatedly to pause/ Press PLAY/PAUSE resume playback. For MP3 Special VCD and SVCD Features For VCD with Playback Control ( PBC ) feature (version 2.0 only) Press MENU to toggle between ' PBC On ' and ' PBC Off '. If you select ' PBC On ', the disc menu ( if available ) will appear on the TV. Use the number buttons ( 0-9 ) to select a play option.
Playback Feature/DVD Menu Options English - If Repeat Single is selected, Random cannot be selected and vice versa. Edit Mode: Program operation works only when Edit Mode is selected. After finished storing the files/ tracks you want into the Program View list, select “Edit Mode” again and press OK to release edit mode. Program View: To view tracks/files in the Program View list. It is disabled if the Program View list is empty. Add To Program: Add files/tracks to the Program View list.
Using the Video setup menu A Press SETUP on the remote control. The system setup menu appears. Language Aspect Ratio View Mode : Auto Fit Video TV System : PAL Audio Rating :16:9 4:3 Video Out :HDMI Smart Picture : Standard HD Resolution :Auto JPEG Interval : 5 Seconds Misc B Press / to select { Video }, then press C Press / to select an item, then press to access. Example: { Video Out } The options for the selected item appears.
DVD Menu Options 0 Brightness 0 English Contrast 0 Color Close D Press / to highlight one of the following options. Brightness Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting. Contrast Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast. Tint Increase the value to darken the picture or vice versa. Choose zero (0) for average setting.
DVD Menu Options E To exit, press SETUP. Rating Level settings Down Sampling You can enable and disable the digital signal for better sound output quality. A In 'Audio', press / to select { Down Sampling }, then press . { Off } If your amplifier / decoder is compatible with 96 KHz PCM, select “ Off “ . Sound is sampled at 96 KHz. { On } If your amplifier / decoder is not compatible with 96 KHz PCM, select “ On “ . Sound recorded at 96 KHz is down sampled to 48 KHz.
DVD Menu Options English When doing this for the first time, enter the default password '0000 '. If you forget your old four-digit password, enter the default password ' 0000'. C Press OK again to enter the new four-digit password. The new four-digit password will now take effect. Enter New Password D Press OK to confirm.
Specifications English DVD Player/Outputs/Supplied Accessories DVD Player Power supply 110 V - 240 V AC, 50/60 Hz Power Consumption 12W ( standby :<1W ) Net weight 1.
Troubleshooting English WARNING Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the warranty. Do not open the DVD player as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the DVD player for repair. If you are unable to remedy a problem by following these guides, consult your dealer or TOSHIBA for help. Problem Solution No power -Check if the AC power cord is properly connected.
Troubleshooting Player does not respond to some operating commands during playback. Solution -To completely reset the player, unplug the AC cord from AC outlet for 5-10 seconds. -Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. DVD Player cannot read CDs /DVDs -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. Menu items cannot be selected -Press STOP twice before selecting system setup menu.
Glossary English Analogue audio: An electrical signal that directly represents sound. In contrast, digital audio can also be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio: The width of a TV screen relative to it is height. Conventional TVs are 4:3 (i.e., the screen is almost square).