SD3010KE
Introduction SAFETY PRECAUTIONS English This symbol is intended to alert the user of the presence of uninsulated 'dangerous voltage' within the product' s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Introduction English 18. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction. 19. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire. 20. While it is thundering, do not touch the connecting cables or the apparatus.
Introduction English CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service this product yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center. Setup Finding a suitable location -Place the set on a flat, hard and stable surface. -Do not place the set on a carpet.
Introduction Region English U.S.A. and Canada regions U.K., Europe regions and Japan Asia Pacific, Taiwan, Korea Discs that can be played ALL ALL 1 “This product is marked with “CE” and complies therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.” 2 Responsible for CE-marking is TOSHIBA INFORMATION SYSTEMS (U.K.
Introduction Introduction SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS Setup Cleaning discs Moisture Condensation Region Codes Table of Contents Connections Connecting to television Connecting to a Stereo System Connecting to a Digital AV Receiver Connecting the power cord Product Overview Front and Rear panels Remote Control Getting Started 1 1-3 4 4 4 4-5 6 7 8 8 9 10 11 Inserting Batteries Finding you
Connections Connecting to television Using HDMITM cable English IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your television. – Connect the DVD player directly to the television. HDMI IN HDMI IN Using SCART socket A Use the scart cable to connect the DVD SCART OUT to the corresponding scart input socket on the TV (cable not supplied).
Connections Connecting to a Stereo System Connecting to a Digital AV Receiver English Stereo System with Left/Right Audio In Jacks A Select one of the video connections (CVBS VIDEO IN, SCART IN or HDMI IN) depending on the options available on your TV. B Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).
Connections English Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
Product Overview Front and Rear panels English Disc tray - Place a disc here I/2 ON/STANDBY - Turns the player on or switches it to standby mode çOPEN/CLOSE - Opens or closes the disc tray IR Sensor B/X PLAY/ PAUSE - Points the remote control towards this sensor - Starts or pauses playback Display - Shows information about the current status of the DVD Player MAINS ~ - Connects to a standard AC outlet STOP - Stops playback - Connects to SCART input of a TV SCART OUT COAXIAL(Digita
Product Overview Remote Control English See the page in [ ] for details. [ 15 ]DISPLAY -Displays information on TV screen during playback [ 14 ]OPEN/CLOSE -Open/close the disc tray [ 14, 15, 21 ]Number Buttons -Selects numbered items in a menu -Press to enter track/chapter/title numbers or password directly [ 14 ]+10 button -Press to enter number greater than 9 -Press +10 button repeatedly to select 10,20,30...
Inserting Batteries A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+ / - ) inside the compartment. C Close the cover. CAUTION: - Never throw batteries into a fire. - The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Note: - Be sure to use AAA size batteries. - Dispose of batteries in a designated disposal area. - Batteries should always be disposed of with the environment in mind.
Getting Started/Playback from disc English { Audio } Select this to change the disc soundtrack language. { DVD Menu } Select this to change the language of the disc menu. D Use / to select a language and press OK to confirm. E Repeat steps C - D for other language settings. IMPORTANT! - DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player.
A Turn on the TV and select the video input connected to the DVD player. B Press 2ON/STANDBY to turn on the DVD player. C Press OPEN/CLOSE to open the disc tray. D Place a disc onto the disc tray with the label facing up, then press OPEN/CLOSE. For double-sided discs, load the side which you want to play facing up. E Playback may start automatically. If not, press PLAY/ PAUSE . If a disc menu appears on the TV, see page 14 'Using the disc menu'.
Playback Feature English A B Zooming In This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture. During playback, press ZOOM repeatedly to display the picture with different scales. Use /// to pan through the enlarged picture. Playback will continue. Press ZOOM repeatedly to return to the original size. Slow Motion A Press SLOW during playback to select the required speed: 1/2, 1/4, 1/8( forward only ). Sound will be muted.
Special DVD Features Playing a Title A Press TITLE. The disc title menu appears on the TV screen. B Use /// or number buttons (0-9) to select a play option. C Press OK to confirm. Changing the Audio Language For DVD： Press AUDIO repeatedly to select different audio languages. Changing the Audio Channel For VCD： Press AUDIO to select the available audio channels provided by the disc (Left, Right, Mix, Stereo).
Playback Feature English Play modes for DivX®/MP3/Audio CD/ JPEG You are able to modify the play modes through the toolkit which appears on the right of below picture on the screen. Press / to navigate between the windows and / buttons to select files/ tracks or play mode items. Then press OK . Please refer to below steps to playback files /tracks in the Program View list: A Select Edit Mode in the toolkit then press OK to start edit mode.
This DVD Player setup is carried out via the TV, enabling you to customise the DVD player to suit your particular requirement. Using the Language setup menu A Press SETUP on the remote control. The system setup menu appears. OSD language : English Language Subtitle Video Audio :Off DivX Subtitle :Standard Audio : English DVD Menu : English Rating Misc B Press / to select {Language }, then press . C Press / to select an item, then press to access.
DVD Menu Options English A B View Mode Use view mode to scale an image that fits to the TV screen's width and height. In ' Video ', press / to select { View Mode }, then press . { Fill } Fill the screen with decoded image. { Original } Display image as its original size. { Height Fit } Fit the screen height with image height. { Width Fit } Fit the screen width with image width. { Auto Fit } Automatically display the decoded image on screen at a suitable size.
DVD Menu Options Using the Audio setup menu A Press SETUP on the remote control. The system setup menu appears. : PCM Language Digital Output Night Mode : Off Video Down Sampling : On 3D Effects : Off Audio Rating Misc B Press / to select { Audio }, then press . C Press / to select an item, then press to access. Example: { Night Mode } The options for the selected item appears.
DVD Menu Options English Press / to select an item, then press to access. Example: { Parental control } The options for the selected item appears. If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state. D Use / to select a setting and press OK to confirm. Example: { 8. Adult } The setting is selected and setup is completed. E To exit, press SETUP.
DVD Menu Options ® DivX Registration ® DivX registration code allows you to rent and ® purchase movies using the DivX VOD service from the internet. For more information, visit website: www.divx.com/vod. A In ‘Misc’, press / to select { DivX Registration }, then press OK. The registration code will appear. B Use the registration code to rent or purchase the ® movies from DivX VOD. Registration service at www.divx.com/vod.
Specifications DVD Player/Outputs/Supplied Accessories English DVD Player Power supply 110 V - 240 V AC, 50/60 Hz Power Consumption 12W ( standby :<1W ) Net weight 1.
WARNING Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the warranty. Do not open the DVD player as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the DVD player for repair. If you are unable to remedy a problem by following these guides, consult your dealer or TOSHIBA for help. Problem Solution No power -Check if the AC power cord is properly connected.
Troubleshooting Problem English Buttons do not work Player does not respond to some operating commands during playback. Solution -To completely reset the player, unplug the AC cord from AC outlet for 5-10 seconds. -Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. DVD Player cannot read CDs /DVDs -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair.
Analogue audio: An electrical signal that directly represents sound. In contrast, digital audio can also be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio: The width of a TV screen relative to it is height. Conventional TVs are 4:3 (i.e., the screen is almost square). Widescreen models are 16:9 (the screen is almost twice as wide as its height) AUDIO OUT jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.
