DIGITAL VIDEO DVD PLAYER SD4015KE OWNER’S MANUAL © 2010 Toshiba Corporation Introduction 2 Connections 14 Basic playback 19 Function setup 23 Others 27
Introduction SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. AVIS WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Read all warnings. Follow all instructions. Do not use this appliance near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Introduction IMPORTANT SAFETY INSTRUCTIONS DON’T remove any fixed cover as this may expose dangerous voltages. DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment.
PRECAUTIONS Notes on moisture condensation Moisture condensation damages the DVD player. Please read the following carefully. NOTES ON DISCS On handling discs Do not touch the playback side of the disc. Introduction Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.
Introduction NOTES ON DISCS About this owner’s manual This owner’s manual explains the basic instructions of this DVD player. Some DVDs are produced in a manner that allows specific or limited operation during playback. As such, the DVD player may not respond to all operating commands. This is not a defect in the DVD player. Refer to instruction notes of discs. ” may appear on the TV screen during operation. “ ” means that the operation is not permitted by the A“ DVD player or the disc.
Table of Contents Introduction 2 3 5 5 Notes on region numbers ................................... 6 Table of Contents ...................................... 7 Identification of Controls ......................... 8 Front panel ...........................................................8 Rear panel ...........................................................8 DVD display ........................................................8 Customizing the Function Settings.......... 23 Using the Language setup menu ..
Introduction Identification of Controls See the page in for details. Front panel HDMI indicator 15 19 11 12 9 8 12 11 HDMI SELECT 15 USB jack 22 Rear panel 14 Power Cord HDMI OUT jack 15 VIDEO L R COAXIAL DIGITAL HDMI OUT ANALOG AV (SCART) socket 14 14 17 18 DVD display The indicators vary depending on the kinds of discs you play.
Using the Remote control Loading batteries 2 Insert batteries (R03/AAA size). Introduction 1 Open the cover. Operating with the remote control Point the remote control at the remote sensor and press the buttons. Distance: About 7 m (23 feet) from the front of the remote sensor Angle: About 30° in each direction of the front of the remote sensor Make sure to match the + and – on the batteries to the marks inside the battery compartment. Caution • Never throw batteries into a fire.
Introduction Using the Remote control (continued) Remote control The instructions in this manual describe the functions on the remote control. See the page in 1. 2. ON/STANDBY button 11 11 3. for details. 11 18. SEARCH (T) button 12 4. 5. 11 MUTE 11 SUBTITLE/MP3 CONV. 6. 11 7. 8. 9. 11 11 8. 11 11 9. 25. 11 10. 11. 12. 13. 11 11 11 11 14. 11 VIDEO OUT 15. 12 DVD USB 12 26. 13 27. 28. 29. 13 13 * 13 30. 31. 32. 13 13 13 16. VIDEO OUT button 12 33. HDMI button 13 17.
Names and functions 1. OPEN/CLOSE button • Press the button to open/close the disc tray. • The function is the same as the OPEN/CLOSE button on the front panel. 3. Number buttons Press number buttons to play relevant chapter/track. 4. E.A.M button (Enhanced Audio Mode) Use to select the sound enhancement on or off. 3D*: To obtain expansive virtual surround sound effects from two speakers. To use this enhancement on sounds output from the ANALOG AUDIO OUT jacks, be sure to set “Digital out” to “PCM”.
Introduction Names and functions (continued) To change the programmed selections, use / / / to move the highlighted bar to the item you want to change and press CLEAR, then input the new number. , • Press / / / to move the highlighted bar to then press PLAY or ENTER to start playback. • To resume normal playback from memory playback, use / / / to move the highlighted bar to “Clear”, then press ENTER. All the input programs will be cleared. Press PLAY button to resume normal playback.
26.DISPLAY button Press to view the operational status. CD Information display e.g. DVD Information display e.g. Track Title Audio language D Title DVD TT Camera angle Subtitles 6CH 1/1 ENG Chapter DVD TT Chapter DVD TT 1) Press DISPLAY while a disc is playing, the first banner shows the track, play mode information and the elapsed time display of the current track. 2) Press DISPLAY again for the remaining time display of the current track.
Connections Connecting to a TV Connect the DVD player to your TV. Connecting to a TV (Using the SCART socket) L VIDEO Normal TV HDMI OUT COAXIAL DIGITAL ANALOG R To AV • Make the following setting.
About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.
Connections Content of the output for each output jack is shown in the following table and differ depending on the On-Screen Display Setting: On-Screen Display Setting Content of output for each output jack “Video” Setting HDMI Output Setting HDMI Output Video Output AV Output RGB Invalid - Composite RGB 576p/480p 576p/480p Composite Composite 720p 720p Composite Composite 1080i 1080i Composite Composite 1080p 1080p Composite Composite HDMI * Settings for HDMI output format are
Connecting to Optional Equipment (continued) Connecting to an amplifier equipped with a Dolby® Digital decoder Amplifier equipped with a Dolby Digital decoder To COAXIAL type digital audio input COAXIAL DIGITAL To wall outlet On-screen display Select: Page “Digital out” “PCM” or “Bitstream” 24 L VIDEO ANALOG R To COAXIAL DIGITAL AUDIO OUT 75 Ω coaxial cable (not supplied) Connecting to an amplifier equipped with Dolby Surround Pro Logic Dolby Surround Pro Logic You can enjoy the dynamic rea
Connections Connecting to Optional Equipment (continued) Connecting to an amplifier equipped with a DTS® decoder DTS® DTS is a high quality surround technology used in theaters and now available for home use, on DVDs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVDs or audio CDs.
Playing a Disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Basic playback Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD player. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD player. 1 Press the ON/STANDBY button.
Basic playback Playing MP3/DivX®/JPEG Files You can play MP3, DivX® or JPEG files that have been recorded on a CD-R or CD-RW on the DVD player. Playing MP3/DivX®/JPEG Files 1 Press OPEN/CLOSE to open the disc tray, place a disc that contains MP3/ DivX®/JPEG Files. A selection menu will appear on the screen. ENTER : music icon 2 : picture icon : video icon Press / to select the Music, Picture or Video icon, and then press ENTER.
ABOUT DIVX VIDEO : DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. Zooming in an image ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.
Basic playback Playing USB Device You can connect the USB flash drives (not included) to the USB jack on the front of DVD player. You can play the files in MP3, DivX® or JPEG format stored on a USB flash drive by connecting it to this player. Connecting to USB flash drive 1 2 Plug the USB flash drive to the USB jack on the front of DVD player. Press the USB button on the remote control to select USB mode during DVD stop.
Customizing the Function Settings You can change the default settings to customize performance to your preference. Using the Language setup menu 1. Press SETUP during stop, the system setup menu appears. 2. Press / button to select the setting item: Language, Subtitle, Audio, DVD Menu or DivX Subtitle. 3. Press button, then use / button to select the setting choice on the right. 4. Press ENTER button. 5. Press SETUP button to exit the menu.
Function setup Customizing the Function Settings (continued) Notes • The displayable picture size is preset on the DVD. Therefore, the playback picture of some DVDs may not conform to the picture size you select. • When you play DVDs recorded in the 4:3 picture size only, and you own a 16:9 TV set, Video output picture will be 16:9 only when you select the TV picture setting on the TV. • If you select “16:9” and you own a 4:3 TV set, the DVD playback picture will be horizontally distorted during playback.
Using the Parental Lock setup menu 1. Press SETUP during stop. 2. Press button to select Parental Lock. 3. Press / button to select the setting option: Password or Parental Lock. Parental Lock Password Parental Lock The parental lock levels are equivalent to the following ratings. Level 1 : Kid Safe Level 2 : G Level 3 : PG Level 4 : PG-13 Level 5 : PG-R Level 6 : R Level 7 : NC-17 Level 8 : Adult • DVDs may or may not respond to the parental lock settings. This is not a defect in the DVD player.
Function setup Customizing the Function Settings (continued) View DivX(R) VOD HDMI CEC DivX® Deregistration DivX® deregistration code allows you to deregister your DVD player using the DivX® VOD service from the internet, please get the deregistration code as follow: DEREGISTRATION CODE: DEREGISTER AT HTTP://VOD.DIVX.COM CONTINUE WITH REGISTRATION? OK CANCEL For more information, please visit http://vod.divx.
Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Cause Correction No power. Symptom • The power plug is disconnected. • Connect the power plug securely into the wall outlet. Page The DVD player turned off by itself. • The automatic power off function turned the unit off. • Press the PLAY button. 19 No picture. • The TV is not set to receive DVD signal output.
Others Specifications DVD player / outputs / supplied accessories DVD Player Power supply 100V - 240V AC, 50/60 Hz Power consumption 9 W (standby: less than 1.0W) Mass 1.28 kg External dimensions 430 x 42 x 209 mm (W/H/D) Signal system PAL/3.
