Operation Manual

14
Connections
Connecting to a TV (Using the SCART socket)
Connecting to a TV (Using the phono type jacks)
Normal TV
To audio
input
To video
input
(yellow)
To VIDEO
OUT
(yellow)
To 2ch AUDIO OUT
(R: red, L:white)
Audio/Video cables (not supplied)
VIDEO
HDMI OUT
ANALOG
COAXIAL DIGITAL
R
L
• Make the following setting.
On-screen display
Select:
Page
“Off”,
“PCM” or
“Bitstream”
“Digital out”
“Video”
RGB
HDMI
24
Connecting to a TV
Connect the DVD player to your TV.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter
(not supplied) and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video
selector, the playback picture may be distorted as DVDs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
To AV
SCART cable
(not supplied)
VIDEO
HDMI OUT
ANALOG
COAXIAL DIGITAL
R
L
Normal TV
• Make the following setting.
Select:
Page
RGB
HDMI
“Video”
On-screen display
24
24