User's Manual

50
TV viewing
Channel search options
Redo channel search in the following procedures
whenever you need.
1
In TV/SD-V mode, press MENU.
2
Press
/
to select “Installation”, then
press ENTER.
3
Confirm “Area Search” is selected, press
ENTER.
Channel search starts.
To cancel the process, press RETURN.
4
Press MENU repeatedly until the menus
disappears.
Searching a specific channel
If you know the frequency of a channel you need,
you can save the searching time by specifying the
frequency.
1) Perform steps 1 to 2.
2) Press
/ to select “Manual Search” or “Auto
Search”, then press ENTER.
Manual Search: To specify the frequency.
Auto Search: To specify the frequency range.
3) Set the channel data.
Auto Search
Start Freq(KHz)
7MBandWidth
474000
End Freq(KHz)
474000
Manual Search
Freq(KHz)
7MBandWidth
474000
e.g.
4) Press ENTER.
Channel search starts.
When complete, “Installation” menu returns.
Operation (continued)
SDP94DTWB_E_01-56.indd 50SDP94DTWB_E_01-56.indd 50 2010/06/08 16:17:012010/06/08 16:17:01