User's Manual

88
Connections
Connecting to an audio system equipped with analog audio inputs
1
Follow the steps on page
37
to select a
mode.
(Except for TV/SD-V. Pictures in TV/SD-V mode
cannot be output to connected equipment.)
2
Connect an audio system equipment to
the AV OUT jack of this player.
To analog audio inputs
To AV OUT
Signal flow
Audio system
Audio/video cable
(supplied)
AUDIO IN
R
L
Red (Right)
White (Left)
Yellow (Video)
No need to connect.
Caution
• When you connect the player to other equipment, be sure to
turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• Turn off the amplifier before you connect or disconnect the
player’s AC adapter. If you leave the amplifier power on, the
speakers may be damaged.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by
a sudden high volume sound.
Notes
• Refer to the owner’s manual of the connected equipment as
well.
• If you place the player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
player away from the tuner and radio.
• Mode selection is not available when the AV OUT jack is
connected.
SDP94DTWB_E_57-100.indd 88SDP94DTWB_E_57-100.indd 88 2010/06/08 16:32:292010/06/08 16:32:29