Manual

35
CONTROLS AND FEATURES
English
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
NOTE: The Picture Position feature cannot be selected in the
DTV mode.
a In the Preferences menu, press B or b to select
Display Settings and press OK.
b Press B or b to select Picture Position.
c Press OK to view the options available for the picture
format that has been selected.
d Press B or b to select an option and press C or c to
adjust the settings.
The options differ depending on the currently
selected widescreen format and the input signal.
To return to the original factory settings, select Reset
in the Picture Position menu and press OK.
This feature is used to hold a still image on the screen.
a Press r to hold an image on the screen, and press
r again to cancel.
When the HDMI Information Display feature is On and you
are watching an HDMI input source, pressing the button displays
the HDMI signal information banner.
a In the Preferences menu, press B or b to select
HDMI Information Display.
b Press C or c to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate*, Aspect, Bit Depth,
Colour Space, RGB/YUV, Chroma Format, and Content
Type (if available).
* If the HDMI input source is interlaced, “Field Rate”
will be displayed instead of “Frame Rate”.
Picture Position
Picture still
HDMI Information Display
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
0
0
Picture Position
Horizontal Position
Reset
Vertical Position