TOSHIBA POS Terminal ST-7000C SERIES Owner's Manual
CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warnung Dies ist ein Klasse A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen. ATTENTION Ce produit est de classe A.
English Waste Recycling information for users: Following information is only for EU-member states: The crossed out wheeled bin symbol is used to indicate that the product must not be treated as general household waste. By ensuring that this product is disposed of correctly you will be helping to prevent potentially negative consequences for the environment and human health, which could otherwise be caused by incorrect waste handling of this product.
Safety Summary EO1-12030 Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment.
Safety Summary Disconnect the plug. Connect a grounding wire. EO1-12030 If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance. Continued use of the machine in that condition may cause fire or electric shock. Disconnect the plug. Ensure that the equipment is properly grounded. Extension cables should also be grounded.
EO1-12030 TABLE OF CONTENTS Page 1. INTRODUCTION----------------------------------------------------------------------------------------1- 1 1.1 Accessories -------------------------------------------------------------------------------------------------- 1- 1 2. APPEARANCE------------------------------------------------------------------------------------------2- 1 3. CONNECTORS -----------------------------------------------------------------------------------------3- 1 4.
1. INTRODUCTION EO1-12030 1.1 Accessories 1. INTRODUCTION Thank you for choosing the TOSHIBA POS Terminal. This POS Terminal contains all the high performance register function necessary for a POS Terminal and enables the user oriented system configuration. By adopting a high-speed CPU, Memory with large capacity, this POS Terminal flexibly accepts the modification corresponding to the future system environment as the user expects.
2. APPEARANCE EO1-12030 2. APPEARANCE 2. APPEARANCE < Front View > Front Panel Lock Front Panel Power LED HDD LED POWER LED Cover Catch HDD LED Reset Switch CD-RW Drive (Option) Volume Power Switch USB5 Connector (1) Power Switch This is the switch to turn the power of the POS terminal ON or OFF. The Power LED is illuminated when turning the power on. (2) Power LED (Green) This is the LED to indicate the power ON/OFF status of the POS terminal. Green LED is illuminated when turning the power ON.
3. CONNECTORS EO1-12030 3. CONNECTORS 3. CONNECTORS # # # # # # # # # # # # # # # # # # # # # LINE OUT (Option) Powered USB (24V) (Option) COM5 (Option)# COM6 (Option) Powered USB (12V) (Option) COM1 LPT1 COM2 COM3 VGA Connector AC Inlet AC Outlet P24V DC Outlet PS/2 (Keyboard) USB0, 1, 2, 3 (Powered USB) (Option) MIC (Option) DRW1 LAN COM4 24V Power for Printer PS/2 K/B DRW2 Description A connector for the AC inlet A connector to supply AC power to the CRT.
4. INSTALLATION PROCEDURE EO1-12030 4.1 Environment for Installation 4. INSTALLATION PROCEDURE 4.1 Environment for Installation 1. 2. 3. Provide a space of minimum 80 mm to the left, right, front, rear, and top of the main unit for proper cooling. (The main unit has air vents on the front, rear, right and left, and a fan. Spaces should be provided to prevent the air vents in the main unit from being closed and the air flow from being obstructed.
5. HOW TO LOCK/UNLOCK THE FRONT PANEL EO1-12030 5. HOW TO LOCK/UNLOCK THE FRONT PANEL 5. HOW TO LOCK/UNLOCK THE FRONT PANEL << How to unlock the front panel >> Front Panel Lock Front Panel # 1. 2. 3. Insert the front panel key into the front panel lock, and turn it counterclockwise to unlock the front panel. Push the upper center of the front panel until it clicks. Gently open the front panel holding it by hand. << How to lock the front panel >> Front Panel Lock Front Panel # 1. 2. 3.
6. GENERAL MAINTENANCE EO1-12030 6.1 Cleaning 6. GENERAL MAINTENANCE 6.1 Cleaning# WARNING! 1. Be sure to disconnect the power cord prior to performing any maintenance. 2. Do not pour water directly on the POS Terminal or wipe it with a soaked cloth, as this may cause fire, electric shock, or machine failure. CAUTION! Never use an organic solvent like thinners or benzene for cleaning. Using such solvents may discolor the covers.
7. TROUBLESHOOTING EO1-12030 7. TROUBLESHOOTING 7. TROUBLESHOOTING WARNING! If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn the power off, unplug the POS Terminal, then contact the nearest TOSHIBA TEC service representative for assistance. Symptom The power does not turn on. • • Check point Is the power cord plugged in correctly? Is the power supplied to the AC outlet? • Has the circuit breaker blown? 7- 1 Solution • Plug in correctly.
8. SPECIFICATIONS EO1-12030 8.1 Basic Specifications 8. SPECIFICATIONS 8.1 Basic Specifications Item Description Input voltage AC 100V-240V +10%, -10% 50/60Hz 4.8A-2.3A DC output voltage AC output voltage Operating temperature DC24V +5%, -5% AC 100V-240V +10%, -10% 50/60Hz 2.0A-1.0A 5°C to 35°C Relative humidity Dimensions 10% to 80%RH (no condensation) 315 mm (W) x 466 mm (D) x 112.5 mm (including the rubber feed and cable cover) Weight Power cord 9.
8. SPECIFICATIONS EO1-12030 8.2 Options 8.
E PRINTED IN JAPAN EO1-12030