Operation Manual

EN-10 User’s Manual
STOR.E D10
3. Connect your STOR.E D10 to your computer via USB
Connect the drive to your computer using the provided USB
cable. Turn on your computer, if it is not already on.
(Sample Illustration) Connecting the USB cable
4. Turn on your STOR.E D10
Press the power button on the back of your STOR.E D10 to turn
on the power.
(Sample Illustration) Turning on the power
After you connect and turn on your STOR.E D10, the drive will
mount to your computer. You are now ready to use your
STOR.E D10.
Never connect your STOR.E D10 to a computer with both a
USB cable and an eSATA cable at the same time. Doing so
could damage the drive and/or the computer and may cause
data loss.
CAUTION
USB port
Power button