Operation Manual
User’s Manual EN-4
STOR.E STEEL S 2.5"
This User’s Manual is uploaded on the drive itself. We recommend to
backup the User’s Manual onto a CD or your local hard disk drive, directly
after the drive being installed.
Safety Instructions
In order to avoid malfunction or damage of the drive, please carefully follow
the precautions listed below.
■ Make sure that you backup all your data on the drive, as Toshiba is not
responsible for data corruption or data loss. Toshiba will not cover any
data recovery cost.
■ Do not
■ open the enclosure or drive
■ disassemble the drive or parts of it
■ place liquids near or on the drive, as it may damage the drive, cause
personal injury or may result in an electrical shock or fire
■ bump, drop or jar the drive
■ move the drive while operating, as data damage may happen
■ use other connectors than USB bus powered types
■ disconnect cables while operating. Please dismount the drive first!
■ expose the drive to temperatures outside the range of 5°C – 35°C
while operating, and temperatures of -20°C – 60°C while switched
off
■ expose the drive to wet or damp conditions
■ cover the drive during operation, as it may become overheated
■ Immediately disconnect the drive if
■ smoke or an unusual smell is coming from the drive enclosure
■ water has entered the drive enclosure or if it becomes wet
■ an object has entered the drive enclosure
■ the cable has been damaged (in such case replace the cable with a
new one)
If the drive behaves not as expected or you have doubts about the
electrical safety, please contact immediately the TOSHIBA hotline or an
authorised reseller!
Under certain lighting conditions like neon lighting, some color effects may
be visible on the surface of the casing. This is not due to a defective
product but due to the material used and the UV coating to protect the
product from scratches.
NOTE
WARNING