Installation Manual

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS

SECTION 100-816-302

MARCH 1993

PROGRAM80

DIGITALAND ELECTRONICTELEPHONE RlNGlNGTONES(C0 LINECALLS)

SELECT = Logical Port Number

---I L-

Ringing Tone Code

Enter number of port having its Enter 1 for Tone I (500/640 Hz).

ringing tone defined. See Note 4

Enter 2 for Tone 2 (600/800 Hz).

for entering a range of ports.

NOTE: Shaded areas apply to DK16 only

Ringing Tone (Code)

Port Numbers

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19

Tone 1 (1)

Tone 2 (2)

/ 1

NOTES:

For more information, see the instructions preceding the record sheets.

Initialized data assigns Tone 1 to all station ports.

Tone 1 is 500 Hz modulated with 640 Hz.

Tone 2 is 600 Hz modulated with 800 Hz.

A range of ports may be specified by entering:

Low pr L,,, port

2-92