Installation Manual

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM51
LCRAREACODES
SELECT = LCR ’ - DATA = Area Code(s)
Plan Number (1 - 8)
Action Code:
(3 digits)
Enter 2 to add code to table.
Enter 3 to delete code from table.
Enter 4# to display codes in table.
DATA = Area Code(s) DATA = Area Code(s)
LCR * LCR *
Plan Plan
q q
DATA = Area Code(s) DATA = Area Code(s)
NOTES: NOTES:
DATA = Area Code(s)
LCR 4
Plan
q
DATA = Area Code(s)
1. For more information, see the instructions preceding the record sheets.
2. Initialized data leaves Tables 1 - 7 blank; all codes (000 - 999) are initialized in Table 8.
3. To enter a range of Area Codes, press:
-7
Low Area J
High AreaA I- Denotes end of string
Code Code
4. Several ranges or individual codes can be expressed at once by separating them with a # button
2-116