Stratagy Installation Guide

The Grand Tour
Software
Stratagy IVP8 Installation Guide 01/02 3
Status Light
The status light indicates the state of the Stratagy IVP8:
Voice Port Status Lights
Each port has a status light labelled 1~8 on the front of the Stratagy IVP8 unit that indicates the
hookswitch and ring states of the port. The lights are On/Off based on the following:
Software
The Stratagy IVP8 requires Stratagy Admin software, installed on a separate IBM-compatible
computer, for local or remote administration and maintenance.
Some basic administrative
functions (e.g., adding User IDs, resetting passwords) can be performed by the System
Administrator using a touchtone telephone (see the
System Administrator Guide on the Stratagy
Library CD-ROM
for details).
The Stratagy Admin screens for Stratagy IVP8 are identical to the standard Stratagy screens with
the exception of the Main Menu and the Users Menu Options screen.
See Chapter 6 – Users Menu, Chapter 7 – Auto (Scheduling) Menu and Chapter 8 – Notify Menu
in the
Stratagy R3 I&M Manual for complete details on using the screens.
Status LED
At boot-up:
Off No power
Blinking Amber Power-on, self-test
Red Failed self-test. The port LEDs indicate which test(s) failed:
Port LED Green
Test Failed
1 DRAM
2RTC
3 EEPROM
4 EPROM Checksum
5 Flash Drive
6 Integration Processor
7 DSP #1
While system is operational:
Green
Green with Blinking Amber
System is operational.
System is operational and hard drive is active.
Port LEDs
Off Port is on-hook and idle.
Green Port is off-hook and in use.