Operation Manual

14
Introduction
How to Use the Wireless Remote Control
Operating Range of the Wireless Remote Control
Point the wireless remote control toward the LCD display’s remote control sensor
during button operation.
Use the wireless remote control within a distance of about 7 m from the front of the
LCD display’s remote control sensor and at a horizontal and vertical angle of within
30° within a distance of about 3.5 m.
The remote control system may not function when direct sunlight or strong illumination strikes the remote control
sensor of the LCD display, or when there is an object in the path.
Handling the wireless remote control
* Do not subject to strong shock.
* Do not allow water or other liquid to splash on the wireless remote control. If the wireless remote control gets wet, wipe it dry
immediately.
* Avoid exposure to heat and steam.
* Other than to install the batteries, do not open the wireless remote control.
Installing and removing the wireless remote control batteries
The wireless remote control is powered by 1.5 V AAA batteries.
How to install the batteries
1 Unlock and pull up the cover in the arrow’s direction.
2 Align the batteries according to the (+) and (-) indications inside the case.
3 Replace the cover.
How to remove the batteries
1 Unlock and pull up the cover in the arrow’s direction.
2 Remove the batteries.
Incorrect use of batteries can result in leaks or explosion.
Be careful especially about the following points.
• Place “AAA” batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of battery compartment.
• Do not mix battery types.
• Do not combine new batteries with used ones. It causes shorter battery life or leakage of batteries.
• Remove dead batteries immediately to prevent battery liquid from leaking into the battery compartment.
Don’t touch exposed battery acid because it causes damage to your skin.
• When the wireless remote control doesn’t work at all or it works only within a short distance to the monitor, change
both batteries with new ones.
• If you do not use the wireless remote control for a long period, remove the batteries.
How to Use the Wireless Remote Control