Operation Manual

Preparation for use

Installing the monitor

Installing in the portrait or face-up position

The monitor can be installed in the portrait or face-up position.

Ensure that the monitor is oriented as shown below.

• The operating environmental condition (temperature) when the monitor is in the portrait or face-up position is 0°C to 35°C.

• Proper operation of the monitor is not guaranteed when it is not mounted as shown below (upside down, face down, etc.).

• When mounting an OPS-compliant computer (commercially available), be sure to set COOLING FAN to ON using

SCREEN SAVER in the CONFIGURATION1 menu of the OSD screen function. If it is set to AUTO, the life of the

computer may become shorter than that with it set to ON or the computer may have trouble.

• In the portrait or face-up position, the lifetime of the backlight is shorter than that in the landscape position.

• When the monitor is in the face-up position, be sure to set COOLING FAN to ON using SCREEN SAVER in the

CONFIGURATION1 menu of the OSD screen function.

Installation in the portrait position

The logo should be on the LEFT side when viewed from the front of the monitor.

This monitor doesn’t have a function to rotate displayed images. To display images in the portrait orientation, use already rotated images.

90° Clockwise

Portrait

logo

Land scape

Installation in the face-up position

Face-up

Face-down

Operation environment for portrait or face-up installation

When the monitor is installed in the portrait or face-up position, the following conditions should be satised.

Temperature 0 - 35°C / 32 - 95°F Humidity 20 - 80% (without condensation)

Installing in the portrait or face-up position