Operation Manual

21
Preparation for use
Installing the monitor
Installing the external speakers
How to install the external speakers
1 Install the external speakers on the monitor. Recommend spec- impedance 8 ohm, audio output 10W+10W (stereo)
( See page 71.)
Use the metal ttings and screws supplied with the external speakers.
Please refer to Quick Setup Guide of the external speakers for the detailed installation procedure.
2 Insert the left speaker cable into the SPEAKER (S)(L) on the monitor, and insert the right speaker cable into the SPEAKER
(S)(R).
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
Left speaker
(option)
Right speaker
(option)
To speaker terminal (L)
To speaker terminal (R)
SPEAKER (S)(L)
SPEAKER (S)(R)
Black(-)
Red(+)
Black(-)
Red(+)
(Sample Illustration) 42”
Switch the built-in speaker mode to external speaker mode after you power on the monitor. See the page for “Speaker
setting” for further details. (See page 40.)
Don’t hold the speakers when moving the monitor.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
Installing the external speakers