Operation Manual

23
Preparation for use
Connection procedure
Prevention of disconnection of HDMI cable
For connecting an HDMI cable to the connector on the monitor, it is recommended to secure the cable using an accessory
clamper to prevent accidental disconnection.
1 Connect an HDMI cable to the connector on the monitor.
2 Secure the HDMI cable using a clamper (accessory) and a band (accessory).
1) Remove the screw from the monitor.
2) Attach the clamper to the monitor using the screw you have removed in step

.
3) Secure the HDMI cable and the clamper using the band.
The band isn’t reusable. The monitor comes with 2 spare bands.
To replace the band, cut and remove the existing band and attach a new one of the same shape (commercially available,
2.5 mm in width and approximately 100 mm in length).
Screw
HDMI cable
Clamper (accessory)
Band (accessory)
3. Secure the HDMI cable using a clamper (accessory).
Clamper (accessory)
Prevention of disconnection of HDMI cable