Operation Manual
31
Preparation for use
Installing the expansion module
Connecting LAN
Monitor connection using LAN
As shown in the illustration below, you can connect this monitor and a computer in network through a LAN hub. Connect
the monitor and the LAN hub using a straight type LAN cable (commercially available).
How to connect
• Turn off the main power switch of the computer and this monitor. If you make a connection while the power is on, it causes a
failure of the devices.
• Connect the computer and the LAN hub using a straight type LAN cable (commercially available).
• Connect this monitor and the LAN hub using a straight type LAN cable (commercially available).
• When you connect two or more monitors, you can connect the monitor and the LAN hub using a straight type LAN cable
(commercially available) as described above.
LAN cable
LAN cable
LAN
LAN hub
LAN hub
LAN
Computer
(LAN connection)
LAN hub
LCD display (side)
(Sample Illustration)42”
• When you use a cross type LAN cable (commercially available), you can connect the monitor and the
computer one-to-one without using a LAN hub, however, the computer may not be supported. It is recommended to
check the operation in advance.
• The image transfer function via the LAN isn’t supported. This monitor isn’t equipped with the host function for
controlling other devices.
Connecting LAN