Operation Manual

49
How to Use
Picture
Mode Description
BRIGHTNESS
You can adjust the brightness. Press the PLUS (+) button to increase the brightness. Press the
MINUS (-) button to decrease the brightness.
You cannot adjust this item when BRIGHTNESS of SCREEN SAVER in the
CONFIGURATION1 menu is ON.
CONTRAST
You can adjust the contrast. Adjust the contrast using the PLUS (+) or MINUS (-) button to
obtain a desired result.
Brightness changes luminance of the backlight. Contrast changes signal levels, and therefore
it is likely to lead to whiteness. This adjustment doesn’t work in the sRGB picture mode.
SHARPNESS
You can adjust the sharpness. Press the PLUS (+) button to make the image look sharper.
Press the MINUS (-) button to make the image look softer.
If you increase the sharpness setting value too much, lines may appear double. In such a
case, decrease the sharpness setting value.
BLACK LEVEL
You can adjust the brightness in the dark area of the image. Press the PLUS (+) button to
brighten dark areas in the image. Press the MINUS (-) button to further darken the dark area
of the image.
This adjustment doesn’t work in the sRGB picture mode.
NOISE REDUCTION
( This function doesn’t work on RGB input signals. )
You can adjust the noise reduction level. Press the PLUS (+) button to increase the value to
lessen the noise.
This adjustment doesn’t work in the sRGB picture mode.
TINT [TINT]:
You can adjust all the colors at the same time. Press the PLUS (+) button to add a green tint.
Press the MINUS (-) button to add a purple tint. [RED], [MAGENTA], [BLUE], [CYAN],
[GREEN], or [YELLOW]:You can adjust each color individually. Press the PLUS (+) button
to shift the selected color to the right around the color circle. Press the MINUS (-) button to
shift the selected color to the left around the color circle.
This adjustment doesn’t work in the sRGB picture mode.
Picture