Operation Manual

52
How to Use
Screen
Mode
Description
H POSITION
You can adjust the horizontal image position.Press the PLUS (+) button to move the image to
the right. Press the MINUS (-) button to move the image to the left.
V POSITION
You can adjust the vertical image position.Press the PLUS (+) button to move the image up.
Press the MINUS (-) button to move the image down.
CLOCK
( For the D-SUB inputs only.)
You can adjust the image size of the computer and eliminate blurred letters. Press the PLUS
(+) button to expand the width of the image on the screen to the right. Press the MINUS (-)
button to narrow the width of the image on the screen to the left.
CLOCK PHASE
( For the D-SUB inputs only.)
You can adjust the level of the periodic variation of the screen f icker.
ZOOM MODE
You can select the mode to stretch the image to f t it to the screen.For the HDMI1, HDMI2,
DVI-D, D-SUB, and DISPLAYPORT inputs, you can select FULL, NORMAL, CUSTOM,
or REAL. For YPbPr, S-VIDEO, and VIDEO, you can select FULL, NORMAL, DYNAMIC,
CUSTOM, or REAL.
FULL: The image is stretched to f ll the screen regardless of its aspect ratio.
NORMAL:
The image is stretched vertically to the full height of the screen while
keeping the aspect ratio.
DYNAMIC:
The image is stretched to f ll the screen with different magnif cations at the
screen center and the screen edges.
CUSTOM:
You can stretch the image horizontally and vertically as you desire using the
CUSTOM ZOOM setting.
REAL: The image is displayed without being stretched or reduced.
The DYNAMIC mode displays images having the 16:9 aspect ratio, such as those with
1920 x 1080 resolution, in the same way as in the FULL mode.
Screen