Operation Manual
56
How to Use
Configuration 1
Mode Description
AUTO SETUP
( For the D-SUB inputs only.)
The screen size, horizontal/vertical position, clock, clock phase, and input signal level are
automatically adjusted.
AUTO ADJUST
( For the D-SUB inputs only.)
When AUTO ADJUST is ON, the horizontal position, vertical position, and clock phase are
automatically adjusted at the time of the timing switching.
POWER SAVE
When the power saver in the OSD menu is turned ON, the power management function
works.
RGB:
When the sync signal of computer input (HDMI1, HDMI2, DVI-D,
D-SUB, or DISPLAYPORT) is terminated, the monitor will be in the
sleep mode in several seconds.
VIDEO:
When the sync signal of video input (YPbPr, S-VIDEO, or VIDEO) is
terminated, the monitor will be in the sleep mode in approximately 10
minutes.
When you hold down the DISPLAY button on the wireless remote control for at least
5 seconds, the NORMAL mode is activated. You can lock the wireless remote control
independently from the control buttons on the rear of the monitor. See page 64.
LANGUAGE
OSD control menus are available in eight languages. (English, German, Spanish, French,
Italian, Swedish, Japanese and Simplied Chinese)
SCREEN SAVER
You can set the SCREEN SAVER functions to reduce the risk of “image persistence.”
GAMMA:
When you select ON, the gamma mode where image persistence is diff
cult to occur is used.
COOLING FAN:
When you select ON, the cooling fan always runs. When you select
AUTO, the built-in fan automatically starts running according to the
operating temperature.
BRIGHTNESS: When you select ON, the brightness decreases.
Conguration 1